Gse25ghecss Parts

This is a replacement screw used to secure appliance components and panels so parts stay properly attached for safe operation. It's a direct-fit fastener matching OEM form and function. What it does

• Secures panels, trim, or internal components to prevent rattling or gaps
• Restores factory attachment where a screw is missing or stripped
• Helps maintain proper alignment of housing and service access
• Suitable when repair requires original-fit fasteners

• Disconnect power or unplug the appliance before servicing to avoid shock
• Use the matching screwdriver or bit to avoid stripping the head
• Thread carefully and avoid overtightening to prevent damage to threads or plastic parts
• Keep removed screws organized; replace only the screws that match the original locations

This sound damper cushions the refrigerator compressor to reduce vibration and minimize noise for quieter operation. It helps protect the compressor from metal-on-metal contact and dampens normal operating sounds. What it does:

• Cushions compressor mounting to absorb vibration and reduce noise
• Prevents metal-on-metal contact that can cause rattling or buzzing
• Helps stabilize the compressor to reduce wear from vibration
• Commonly used when compressor noise, rattling, or increased vibration is noticed

• One sound damper

• Always disconnect power to the appliance before beginning any repair
• Access the compressor area (rear lower cabinet); remove any panels as needed
• Remove the old damper and press the replacement onto the compressor mounting foot until fully seated
• If mounting hardware is damaged or the compressor mount appears worn, replace mounting parts.

The MWF Bypass is an OEM replacement part for GE refrigerators. Located within the bottom freezer compartment, the metal water filter bypass fitted assembly is responsible for directing filtered or unfiltered water flow to the ice maker and dispenser.

Causes for replacement may include faulty diverter components obstructing water flow to selections or resulting in water leaks.

Symptoms of a problematic bypass unit include:

• Inability to select filtered or unfiltered water from the dispenser
• Ice maker failure due to lack of water or poor water quality
• Mineral deposits accumulating on internal parts from unfiltered water

This OEM replacement bypass is compatible with GE, Hotpoint, and Profile model refrigerators.

This water filter manifold and tubing assembly fits refrigerators that use the XWF-style filter. It holds and seals the filter cartridge and routes water to the dispenser and icemaker for correct flow and leak-free operation. What it does:

• Mounts and seals the XWF filter cartridge
• Routes water through the filter to the dispenser and ice maker
• Replaces a cracked, clogged, or leaking filter head/manifold
• Typical symptoms: leaks at the filter connection, weak/no water dispensing, reduced ice production, filter won't seat or stay in

• One manifold/head with attached inlet and outlet tubing

• Unplug the refrigerator and shut off the water supply
• Dispense water to relieve pressure; place a towel or pan to catch residual water
• Release quick-connect fittings; note tube routing and transfer any mounting hardware from the old assembly
• Restore water and power, check all connections for leaks, and flush several cups of water to purge air

This LED board mounting bracket secures the interior light board inside your refrigerator. Replacing a cracked or missing bracket restores proper support for the LED module so the compartment light stays stable and correctly positioned.

• Holds the LED light board securely within the light housing
• Aligns the board for consistent, even illumination
• Replaces broken, warped, or loose mounting hardware
• Common symptoms: intermittent light when the housing is touched, sagging/rattling light board, or visible cracked bracket

• Disconnect power to the refrigerator before service
• Remove the light lens/cover and release the failed bracket
• Transfer the LED board to the new bracket; handle electronics by the edges
• Reinstall the cover and restore power to test operation

The Interface Dispenser Assembly is an OEM part for GE refrigerators. This assembly serves as the control panel for your refrigerator's dispenser, allowing you to easily dispense water, ice, and other functions.

A bad interface dispenser assembly can occur due to electrical issues, component failure, or other factors. If you notice symptoms such as unresponsive buttons, dispenser not working, or incorrect display readings, it may be time to replace the interface dispenser assembly.

Symptoms of a bad interface dispenser assembly include:

• Unresponsive buttons
• Dispenser not working
• Incorrect display readings

Restore the function of your GE refrigerator's dispenser by replacing the faulty interface dispenser assembly with this genuine OEM part.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
 

The R134 Drier is an OEM part for GE refrigerators. This component plays a critical role in the refrigeration system by removing moisture and contaminants from the refrigerant, ensuring efficient cooling and preventing damage to other parts of the system. It helps maintain the purity and effectiveness of the refrigerant as it cycles through the system.

You should replace the R134 drier if it becomes clogged or damaged. Common causes of a bad drier include wear and tear over time, exposure to moisture, or contamination from other failing components in the refrigeration system.

Symptoms of a bad R134 drier include:

• Reduced cooling efficiency
• Frost buildup on the evaporator coils
• Unusual noises from the refrigeration system
• Increased energy consumption
• Refrigerator not maintaining the set temperature

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This recess grille fits the refrigerator's water/ice dispenser well. It supports your cup and helps catch drips, restoring a clean, finished look in Dorian Gray when the original insert is cracked, stained, or missing.

• Sits in the dispenser recess to provide a stable surface for cups during dispensing
• Helps collect minor drips and splashes to keep the area tidy
• Direct replacement when the original grille is broken, warped, discolored, or missing
• Common symptoms include rocking cups, pooled water on the shelf, or a worn appearance

• Typically tool-free: lift out the old grille from the dispenser recess
• Clean and dry the recess before installing the new insert
• Set the new grille in place and ensure it sits flat and properly aligned

The Lamp Socket is an OEM component specifically designed for GE refrigerator interiors. It provides the connection point for interior lighting.

The lamp socket mounts near the top of the interior and includes contacts that receive and hold the installed light bulb firmly in position. Proper socket operation enables convenient and dependable interior illumination. 

Causes of a bad socket can include wear from repeated bulb replacements, damaged contacts from moisture exposure over time, or loose electrical connections.

Symptoms include:

• Intermittent or no interior light function  
• Bulbs that will not screw in securely or pop out easily
• Exposed or frayed electrical wire connections
• Visible cracks or breaks in the socket assembly

This genuine OEM GE replacement socket ensures clear vision inside refrigerator shelves for years. Compatible with additional brands including Hotpoint, RCA, or Kenmore refrigerator models.

This interface dispenser assembly is the dispenser control and user touchpad that lets you operate the refrigerator's water and ice dispenser functions from the door. It restores control responsiveness and on-door display feedback for normal dispensing use. What it does:

• Replaces the dispenser touchpad/overlay and control interface to restore user input for water and ice selection
• Translates button presses and touch inputs to the dispenser control board so the dispenser operates when requested
• Resolves symptoms like unresponsive dispenser buttons, no on-door display feedback, or intermittent dispenser operation
• Works with the dispenser housing and internal wiring to provide a finished user-facing surface

• Interface dispenser assembly (1)

• Disconnect power and water supply before starting; follow safety guidelines for electrical and plumbing work
• Handle the overlay and display carefully to avoid scratching or damaging the finish
• Remove door trim or inner panels as required to access fasteners and connector plugs; use basic hand tools
• Reconnect wiring harnesses fully and test dispenser functions before reassembly

The Drier is an OEM component specifically designed for GE combination refrigerator-freezers. Absorbing moisture, its treated silica particles buffer humidity within refrigerant lines. Proper drying sustains energy-efficient performance while preventing corrosion.

Causes of a faulty drier commonly relate to saturation reducing capacity. As desiccant degrades, water passes into closed system compressors requiring change. 

Symptoms of a bad drier involve:

• Frost and ice buildup impairing cooling  
• Puddling around evaporator evidencing leaks
• Higher operating costs from impaired efficiency

Causes of a bad drier involve typical saturation shortening drying cycles. Cracks release desiccant particles risking blockages necessitating timely replacement.

This OEM GE part is also compatible with some Hotpoint, RCA, and Frigidaire combination units. Replace to retain steady humidity management protecting components and maximizing freshness years of operation.
 

This extruded light shield protects and directs interior refrigerator light while concealing the lamp for a cleaner appearance. It restores proper light diffusion so contents are evenly illuminated and prevents direct contact with the bulb. What it does:

• Covers and protects the interior lamp from accidental contact or impact
• Helps diffuse or redirect light for more even illumination of refrigerator compartments
• Prevents loose items from coming into direct contact with the bulb or LED assembly
• Common symptom: cracked, yellowed, or missing shield that affects lighting or safety

• One extruded light shield

• Disconnect power before servicing the appliance to avoid shock
• Remove any shelving or trim obstructing access before replacing the shield
• Handle the shield gently to avoid cracking; align and snap or seat per factory guides

Replacement dispenser housing shield that protects internal dispenser components and restores a clean, finished appearance. Fits the dispenser area and helps prevent damage from spills or impacts while improving dispenser alignment and usability. What it does:

• Shields internal dispenser parts from spills, debris and everyday wear.
• Restores proper fit and finish to the dispenser opening for consistent cup placement.
• Common replacement when the dispenser guard is cracked, broken, warped or missing.
• Helps reduce risk of leaks and keeps controls and mechanisms covered.

• Disconnect power to the appliance before starting any repair.
• Typically requires removal of the dispenser front or trim; basic hand tools recommended.
• Retain or transfer any clips, screws or brackets during replacement.

This condenser fan and housing assembly circulates air across the condenser coils to help your refrigerator dissipate heat and run efficiently. Replaces a damaged or worn housing and fan to restore proper airflow and cooling performance. What it does

• Moves air over condenser coils so the compressor can shed heat and maintain cooling
• Prevents overheating and helps the system run more efficiently
• Can stop loud fan noise, rattling, or reduced cooling when the fan or housing is damaged
• Restores correct airflow when the original housing is cracked, bent, or obstructed

• One condenser fan and housing assembly

• Disconnect power to the appliance before starting any repair
• Access may require removing rear or bottom access panels; keep track of fasteners
• Handle sheet metal edges and fan blades carefully to avoid cuts and damage
• After installation, verify fan spins freely and recheck connections; confirm proper cooling