Gss252ynehfs Parts

This sound damper cushions the refrigerator compressor to reduce vibration and minimize noise for quieter operation. It helps protect the compressor from metal-on-metal contact and dampens normal operating sounds. What it does:

• Cushions compressor mounting to absorb vibration and reduce noise
• Prevents metal-on-metal contact that can cause rattling or buzzing
• Helps stabilize the compressor to reduce wear from vibration
• Commonly used when compressor noise, rattling, or increased vibration is noticed

• One sound damper

• Always disconnect power to the appliance before beginning any repair
• Access the compressor area (rear lower cabinet); remove any panels as needed
• Remove the old damper and press the replacement onto the compressor mounting foot until fully seated
• If mounting hardware is damaged or the compressor mount appears worn, replace mounting parts.

The MWF Bypass is an OEM replacement part for GE refrigerators. Located within the bottom freezer compartment, the metal water filter bypass fitted assembly is responsible for directing filtered or unfiltered water flow to the ice maker and dispenser.

Causes for replacement may include faulty diverter components obstructing water flow to selections or resulting in water leaks.

Symptoms of a problematic bypass unit include:

• Inability to select filtered or unfiltered water from the dispenser
• Ice maker failure due to lack of water or poor water quality
• Mineral deposits accumulating on internal parts from unfiltered water

This OEM replacement bypass is compatible with GE, Hotpoint, and Profile model refrigerators.

This water filter manifold and tubing assembly fits refrigerators that use the XWF-style filter. It holds and seals the filter cartridge and routes water to the dispenser and icemaker for correct flow and leak-free operation. What it does:

• Mounts and seals the XWF filter cartridge
• Routes water through the filter to the dispenser and ice maker
• Replaces a cracked, clogged, or leaking filter head/manifold
• Typical symptoms: leaks at the filter connection, weak/no water dispensing, reduced ice production, filter won't seat or stay in

• One manifold/head with attached inlet and outlet tubing

• Unplug the refrigerator and shut off the water supply
• Dispense water to relieve pressure; place a towel or pan to catch residual water
• Release quick-connect fittings; note tube routing and transfer any mounting hardware from the old assembly
• Restore water and power, check all connections for leaks, and flush several cups of water to purge air

The Interface Dispenser Assembly is an OEM part for GE refrigerators. This assembly serves as the control panel for your refrigerator's dispenser, allowing you to easily dispense water, ice, and other functions.

A bad interface dispenser assembly can occur due to electrical issues, component failure, or other factors. If you notice symptoms such as unresponsive buttons, dispenser not working, or incorrect display readings, it may be time to replace the interface dispenser assembly.

Symptoms of a bad interface dispenser assembly include:

• Unresponsive buttons
• Dispenser not working
• Incorrect display readings

Restore the function of your GE refrigerator's dispenser by replacing the faulty interface dispenser assembly with this genuine OEM part.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
 

The R134 Drier is an OEM part for GE refrigerators. This component plays a critical role in the refrigeration system by removing moisture and contaminants from the refrigerant, ensuring efficient cooling and preventing damage to other parts of the system. It helps maintain the purity and effectiveness of the refrigerant as it cycles through the system.

You should replace the R134 drier if it becomes clogged or damaged. Common causes of a bad drier include wear and tear over time, exposure to moisture, or contamination from other failing components in the refrigeration system.

Symptoms of a bad R134 drier include:

• Reduced cooling efficiency
• Frost buildup on the evaporator coils
• Unusual noises from the refrigeration system
• Increased energy consumption
• Refrigerator not maintaining the set temperature

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This LED light bulb restores bright, reliable interior lighting in your refrigerator when the door opens. It's a direct replacement for the original lamp to keep shelves and bins easy to see.

• Turns on with the door switch to illuminate the fresh food or freezer area (varies by model)
• Replaces a burned-out, dim, or flickering bulb
• Helps restore visibility to shelves, bins, and drawers
• Typical symptoms: no light when the door opens, intermittent light, or visible damage to the bulb

• Unplug the refrigerator or switch off power at the breaker before servicing
• Allow the old bulb to cool; remove any lens/cover if your model has one
• Remove the old lamp and install the new one per your model's instructions; do not force or overtighten
• Restore power and test door-activated lighting

The Lamp Socket is an OEM component specifically designed for GE refrigerator interiors. It provides the connection point for interior lighting.

The lamp socket mounts near the top of the interior and includes contacts that receive and hold the installed light bulb firmly in position. Proper socket operation enables convenient and dependable interior illumination. 

Causes of a bad socket can include wear from repeated bulb replacements, damaged contacts from moisture exposure over time, or loose electrical connections.

Symptoms include:

• Intermittent or no interior light function  
• Bulbs that will not screw in securely or pop out easily
• Exposed or frayed electrical wire connections
• Visible cracks or breaks in the socket assembly

This genuine OEM GE replacement socket ensures clear vision inside refrigerator shelves for years. Compatible with additional brands including Hotpoint, RCA, or Kenmore refrigerator models.

This interface dispenser assembly is the dispenser control and user touchpad that lets you operate the refrigerator's water and ice dispenser functions from the door. It restores control responsiveness and on-door display feedback for normal dispensing use. What it does:

• Replaces the dispenser touchpad/overlay and control interface to restore user input for water and ice selection
• Translates button presses and touch inputs to the dispenser control board so the dispenser operates when requested
• Resolves symptoms like unresponsive dispenser buttons, no on-door display feedback, or intermittent dispenser operation
• Works with the dispenser housing and internal wiring to provide a finished user-facing surface

• Interface dispenser assembly (1)

• Disconnect power and water supply before starting; follow safety guidelines for electrical and plumbing work
• Handle the overlay and display carefully to avoid scratching or damaging the finish
• Remove door trim or inner panels as required to access fasteners and connector plugs; use basic hand tools
• Reconnect wiring harnesses fully and test dispenser functions before reassembly

The Drier is an OEM component specifically designed for GE combination refrigerator-freezers. Absorbing moisture, its treated silica particles buffer humidity within refrigerant lines. Proper drying sustains energy-efficient performance while preventing corrosion.

Causes of a faulty drier commonly relate to saturation reducing capacity. As desiccant degrades, water passes into closed system compressors requiring change. 

Symptoms of a bad drier involve:

• Frost and ice buildup impairing cooling  
• Puddling around evaporator evidencing leaks
• Higher operating costs from impaired efficiency

Causes of a bad drier involve typical saturation shortening drying cycles. Cracks release desiccant particles risking blockages necessitating timely replacement.

This OEM GE part is also compatible with some Hotpoint, RCA, and Frigidaire combination units. Replace to retain steady humidity management protecting components and maximizing freshness years of operation.
 

This self-adhesive foam strip provides a flexible seal and buffer for appliance gaps, helping reduce drafts, rattling, and moisture intrusion. Designed for easy stick-on replacement where foam padding or sealing is needed. What it does

• Seals small gaps between components to help reduce air leaks and temperature loss
• Cushions panels and doors to minimize noise and vibration
• Helps block moisture and dust from entering sensitive areas
• Self-adhesive backing allows for quick placement without extra glue

• One self-adhesive foam strip

• Surface must be clean and dry; wipe with isopropyl alcohol for best adhesion
• Measure and trim the foam strip to fit—use scissors or a utility knife
• Press firmly along the length to ensure full contact; allow adhesive to set before closing doors or panels
• For safety, disconnect power to the appliance before working in internal areas

Replacement dispenser housing shield that protects internal dispenser components and restores a clean, finished appearance. Fits the dispenser area and helps prevent damage from spills or impacts while improving dispenser alignment and usability. What it does:

• Shields internal dispenser parts from spills, debris and everyday wear.
• Restores proper fit and finish to the dispenser opening for consistent cup placement.
• Common replacement when the dispenser guard is cracked, broken, warped or missing.
• Helps reduce risk of leaks and keeps controls and mechanisms covered.

• Disconnect power to the appliance before starting any repair.
• Typically requires removal of the dispenser front or trim; basic hand tools recommended.
• Retain or transfer any clips, screws or brackets during replacement.

This is a replacement 8-18 x 3/4 inch screw used to secure appliance panels and components. It restores proper fastening to reduce rattles and ensure parts stay in place. What it does

• Fastens trim pieces, panels, brackets and small components
• Replaces missing or stripped screws that cause loose panels or vibration
• Helps prevent gaps that can allow rattling or misalignment
• Matches OEM thread and length for a correct fit when specified

• Use the correct driver bit to avoid stripping the head
• Tighten securely but avoid overtightening, which can strip threads or crack plastic
• Remove power/employ basic safety measures before accessing internal components
• Replace all matching screws for consistent fit

This is a replacement cover for the refrigerator dispenser bucket that restores the dispenser opening and helps contain and direct dispensed contents for cleaner operation and improved appearance. What it does:

• Replaces a cracked, broken, or missing dispenser bucket cover that can let ice or water escape
• Helps guide dispensed items into the cup or container to reduce spills
• Restores a finished look to the dispenser area
• Prevents debris from entering the dispenser bucket

• One dispenser bucket cover

• Disconnect power to the appliance before beginning any repair
• Typically installs by aligning and snapping into place or securing with the original fasteners; retain any removed clips or screws for reassembly
• Handle plastic parts carefully to avoid cracking during installation

This AC freezer harness routes power and signal connections between the freezer compartment components to restore proper electrical continuity and reliable operation. It's a direct-fit wiring harness used in the freezer section of compatible refrigerators. What it does:

• Provides power and signal connections for freezer components such as fans, sensors, and control interfaces
• Ensures secure plug-to-plug wiring without splicing or ad-hoc connections
• Commonly replaced when freezer fan, sensors, or controls lose power or show intermittent operation
• Can prevent electrical issues caused by damaged, corroded, or brittle wiring

• Disconnect power to the appliance before starting any repair to avoid shock hazard
• Verify connector orientation and routing before fastening; match OEM wiring paths and clips
• Do not alter or splice the harness; use exact replacement to maintain safety and function

This freezer door light switch restores interior lighting control so the freezer light turns on and off when the door opens and closes. It's a direct-replace switch that helps make it easier to see frozen items and check temperatures. What it does

• Actuates the freezer interior light when the door opens and closes
• Replaces a worn or stuck door switch that leaves the light always on or off
• Prevents unnecessary light-related power draw and helps avoid frost/moisture near the lamp area
• Fits in the door jamb where the original door plunger or actuator contacts the switch

• One replacement freezer door light switch

• Disconnect power to the appliance before starting any repair
• Access may require removing interior trim or the freezer door liner—keep fasteners organized
• Verify actuator/plunger alignment and smooth door operation before reassembly