Gss25iynbhfs Parts

This 10-32 x 1/2 machine screw secures appliance components where a standard 10-32 fastener is required. It restores proper mounting and reduces vibration or loose panels for reliable, quiet operation. What it does:

• Secures panels, brackets, or components that use a 10-32 threaded hole
• Prevents rattling, misalignment, and intermittent contact caused by loose fasteners
• Maintains electrical or mechanical connections when used as the OEM-specified screw
• Helps restore fit and finish after repair or disassembly

• Use the correct 10-32 driver (Phillips or slotted depending on head) and hand-start the screw to avoid cross-threading
• Tighten until snug; avoid over-tightening to prevent stripping threads or cracking plastic parts
• Replace only with the same size and thread spec to ensure proper fit
• Disconnect power if working near energized components or wiring

This RFID cover and FCC label assembly protects the appliance's RFID module and provides the required regulatory marking. It helps keep the module secure and the label visible for compliance and service identification. What it does:

• Covers and protects the RFID module or antenna from dirt and physical contact
• Keeps the FCC/regulatory label attached and visible for compliance verification
• Helps prevent accidental damage that can affect communication or service diagnostics
• Suited for replacing a cracked, missing, or detached cover or label

• One RFID cover with attached FCC label

• Disconnect power to the appliance before servicing to avoid shock or damage
• Handle with care; this plastic cover and label are small and can be damaged by excessive force
• Reinstall using the original clips or fasteners; do not force into place
• If the RFID module or nearby electronics are exposed, avoid static discharge—use a grounding strap if available

This orifice and fan motor assembly replaces the heater or combustion air fan and its mounted orifice to restore proper airflow and ignition performance in gas appliance units. It helps stabilize burner operation and supports reliable heating cycles. What it does:

• Moves combustion/vent air to maintain proper burner airflow and consistent flame behavior
• Positions and secures the gas orifice to ensure correct fuel delivery to the burner
• Helps reduce frequent ignition failure, weak flames, or uneven heating when failing
• Works as a direct-fit replacement when the original orifice and small blower motor are worn or damaged

• Turn off gas supply and power to the appliance before attempting service
• Replace only with the exact part number shown; follow the appliance manufacturer's disassembly steps
• Check gas connections and seals after installation for leaks; use a gas leak detector or soapy water test

This is a 10-32 machine-thread screw used to secure appliance panels, trim, and components. It replaces missing or damaged fasteners so parts fit tightly and operate without rattles or misalignment. What it does:

• Fastens panels, brackets, or assemblies that use a 10-32 machine screw
• Restores secure mounting where a stripped, missing, or corroded screw causes looseness
• Helps eliminate vibration noise or gaps caused by loose hardware
• Matches OEM thread size and length for correct fit in designated mounting holes

• One 10-32 x 5/16 machine screw

• Disconnect power and remove power source or batteries before servicing appliances
• Use the correct screwdriver or nut driver to avoid stripping the head
• Thread carefully; do not force or overtighten to prevent thread damage
• Replace any damaged mating hardware or clipped inserts for a secure repair

This rubber grommet secures the appliance's base grille, helping keep the grille fitted and reducing vibration and rattle. It's a simple replacement part to restore a snug, finished look at the appliance base. What it does:

• Cushions and retains the base grille in place to prevent gaps and movement
• Helps reduce vibration noise and rattling from a loose grille
• Restores proper fit where a grommet is cracked, torn, or missing

• One (1) grommet for the base grille

• Disconnect power to the appliance before beginning any service
• Typically installs by pressing into the grille or cabinet opening—no special tools required
• Inspect surrounding grille tabs or mounting points and replace any damaged hardware as needed

This cover fits over the refrigerator auger motor to protect internal components and help guide ice through the dispenser. It keeps the motor area enclosed to reduce debris intrusion and supports smooth auger movement. What it does

• Protects the auger motor and gearbox from ice, frost, and debris
• Helps guide ice from the bin into the auger for consistent dispensing
• Common symptom: reduced or intermittent ice dispensing, unusual noises from the dispenser area

• One cover

• High-level replacement — remove power to the refrigerator before starting
• Handle components gently to avoid damaging the auger or wiring
• If the auger still doesn't turn after replacement, check the motor, wiring, and control components

This XWFE filter cover secures the refrigerator's XWFE water filter in its housing to help maintain a proper seal and alignment for reliable water flow and filter performance. It replaces a damaged or missing housing cover. What it does:

• Covers and locks the XWFE water filter into the filter housing to keep the filter seated correctly
• Helps maintain the water seal to reduce leaks and prevent bypass
• Supports proper water flow through the filter for cleaner-tasting water
• Addresses symptoms like a loose/missing cover, filter not staying in place, or intermittent leaks near the filter area

• One XWFE filter cover

• Replace with power/water supply off; follow your refrigerator manufacturer's instructions before working on water system
• Typically installs by snapping or sliding into the filter housing—confirm alignment before pressing fully
• Inspect the filter O-ring and housing for damage and replace if necessary to ensure a proper seal

This is a replacement screw used to secure appliance components and panels so parts stay properly attached for safe operation. It's a direct-fit fastener matching OEM form and function. What it does

• Secures panels, trim, or internal components to prevent rattling or gaps
• Restores factory attachment where a screw is missing or stripped
• Helps maintain proper alignment of housing and service access
• Suitable when repair requires original-fit fasteners

• Disconnect power or unplug the appliance before servicing to avoid shock
• Use the matching screwdriver or bit to avoid stripping the head
• Thread carefully and avoid overtightening to prevent damage to threads or plastic parts
• Keep removed screws organized; replace only the screws that match the original locations

This sound damper cushions the refrigerator compressor to reduce vibration and minimize noise for quieter operation. It helps protect the compressor from metal-on-metal contact and dampens normal operating sounds. What it does:

• Cushions compressor mounting to absorb vibration and reduce noise
• Prevents metal-on-metal contact that can cause rattling or buzzing
• Helps stabilize the compressor to reduce wear from vibration
• Commonly used when compressor noise, rattling, or increased vibration is noticed

• One sound damper

• Always disconnect power to the appliance before beginning any repair
• Access the compressor area (rear lower cabinet); remove any panels as needed
• Remove the old damper and press the replacement onto the compressor mounting foot until fully seated
• If mounting hardware is damaged or the compressor mount appears worn, replace mounting parts.

This water filter manifold and tubing assembly fits refrigerators that use the XWF-style filter. It holds and seals the filter cartridge and routes water to the dispenser and icemaker for correct flow and leak-free operation. What it does:

• Mounts and seals the XWF filter cartridge
• Routes water through the filter to the dispenser and ice maker
• Replaces a cracked, clogged, or leaking filter head/manifold
• Typical symptoms: leaks at the filter connection, weak/no water dispensing, reduced ice production, filter won't seat or stay in

• One manifold/head with attached inlet and outlet tubing

• Unplug the refrigerator and shut off the water supply
• Dispense water to relieve pressure; place a towel or pan to catch residual water
• Release quick-connect fittings; note tube routing and transfer any mounting hardware from the old assembly
• Restore water and power, check all connections for leaks, and flush several cups of water to purge air

This fixed shelf fits the refrigerator's fresh food compartment, providing a sturdy, level surface for everyday storage. Replace a cracked or missing shelf to regain usable space and keep items organized and easy to access. What it does:

• Supports containers and groceries in the fresh food section
• Provides a flat, stable surface that helps prevent tipping and spills
• Restores storage capacity when the original shelf is damaged or missing
• Common signs of failure: cracks, broken edges, wobbling, or not seating in side rails

• One fixed shelf for the fresh food compartment

• Disconnect power before servicing
• Clear the compartment and remove the old shelf
• Align and slide the new shelf into the correct tracks until fully seated and level
• Handle carefully; do not force into place or overload during installation

The R134 Drier is an OEM part for GE refrigerators. This component plays a critical role in the refrigeration system by removing moisture and contaminants from the refrigerant, ensuring efficient cooling and preventing damage to other parts of the system. It helps maintain the purity and effectiveness of the refrigerant as it cycles through the system.

You should replace the R134 drier if it becomes clogged or damaged. Common causes of a bad drier include wear and tear over time, exposure to moisture, or contamination from other failing components in the refrigeration system.

Symptoms of a bad R134 drier include:

• Reduced cooling efficiency
• Frost buildup on the evaporator coils
• Unusual noises from the refrigeration system
• Increased energy consumption
• Refrigerator not maintaining the set temperature

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Paddle Dispenser is an OEM part for GE refrigerators. Located inside the freezer compartment door, this electronic assembly dispenses cubed ice on demand through a motorized steel ice paddle. 

Causes of a bad paddle dispenser include freeze damage from leaked water entering electronic components. The motor or gearing may degrade after extended use over time.

Symptoms include:

• Failure to dispense ice or jamming of the paddle mechanism  
• "Ice" or "Select" lights remaining illuminated without operation
• Audible grinding or ticking noises coming from inside the door  

This GE OEM replacement ensures convenient access to ice at any time. With high-reliability engineering even in cold freezer temperatures, it restores dependable operation for automatic ice retrieval. Suitable for retrofitting some Hotpoint, RCA, and Kenmore freezer doors as well. Keep drinks chilled easily and safely.
 

This door hinge thimble—also called a hinge bushing—is a small sleeve that fits into the refrigerator door's hinge bore to act as a bearing for the hinge pin, helping the door open and close smoothly and stay aligned.

• Provides a low-friction bearing surface between the hinge pin and door
• Helps maintain proper door alignment and closing performance
• Can reduce squeaks, scraping, or binding caused by a worn or missing bushing
• Replace if cracked, deformed, or if the door sags or doesn't swing smoothly

• Disconnect power and support the door before removing hinge hardware
• Remove hinge cover and screws, lift door off the hinge pin, and access the thimble in the door
• Pull out the old thimble and press the new thimble fully into the hinge bore
• Reinstall and align the door; verify gasket seal and hinge fasteners are secure