Gss25slsmf Parts

This replacement screw secures appliance components and panels where an 8-36 threaded fastener is required. Durable and ready for repair, it restores proper fit and reduces rattles or loose parts. What it does:

• Fastens panels, brackets, or components that use an 8-36 threaded screw
• Replaces stripped, lost, or damaged screws that cause vibration or loose parts
• Restores secure mechanical connections to help maintain normal operation

• One screw

• Disconnect power and follow appliance safety procedures before starting repairs
• Use the correct driver and match thread engagement; do not force or cross-thread
• Tighten to snug; avoid overtightening which can strip threads or damage parts

This ice dispenser deflector mounts in the freezer door chute to guide cubes or crushed ice into your glass. Replace a cracked or missing deflector to reduce scatter and keep ice flowing where you want it.

• Directs ice down the dispenser chute toward the glass
• Helps contain spray and bounce-back of cubes
• Restores proper flow when the original deflector is cracked, warped, or missing
• Common symptoms: ice misses the glass, ice scatters on the floor, visible damage to the deflector

• Disconnect power to the refrigerator before servicing; wear cut-resistant gloves
• Access the dispenser area per your model's instructions and note the deflector's orientation
• Transfer any screws or clips from the old part; avoid forcing plastic tabs
• Restore power and test ice dispense to confirm proper direction and clearance

This is a screw intended for use in refrigerators, specifically as the top mounting screw for the handle. If the screw in the handle is missing, stripped, or otherwise not performing its function, a replacement screw should be ordered.A visual inspection will determine if a screw is missing. If the door handle is loose or falling off from the top, it is a sign that a replacement screw is required. This repair is a quick and easy process. It involves the use of a screwdriver. Remove the old screw if there is one in place. Line up the holes on the door and the door handle component before twisting the new screw into position. Wear gloves to protect hands during the repair.This screw is a genuine OEM replacement part. It is sourced directly from the manufacturer. The screw is sold individually. The screw is compatible with several different models of refrigerators. It can be installed in ranges made by Electrolux, Frigidaire, Gibson, Westinghouse, and Kelvinator.

This replacement door bin mounts to the fresh food door and holds bottles, jars, and condiments. Replace a cracked or missing bin to restore organized, secure door storage and help prevent items from tipping during door movement. What it does

• Attaches to the refrigerator's fresh food door to provide storage space
• Restores proper fit when the original bin is cracked, warped, or missing
• Helps keep items contained and reduces spills when opening/closing the door
• Common symptoms: broken tabs, bin won't stay seated, loose or damaged shelf

• 1 fresh food door bin

• Compare to the original to confirm size and shape before installing
• Engage the rear hooks into the door liner slots, then press down until fully seated
• Handle plastic carefully to avoid stress cracks; do not force into place
• Distribute weight evenly and avoid overloading the bin after installation

Includes 12 washers.

Fresh food

This dispenser bucket cover is the replacement top for the refrigerator ice bin that helps contain and direct dispensed ice. Restores a proper seal and keeps ice protected for smooth dispensing and reduced spills. What it does:

• Replaces a cracked, warped or missing ice bin cover so the dispenser operates without obstruction
• Helps direct ice from the bin into the dispenser mechanism for consistent delivery
• Reduces ice spills and limits exposure of ice to odors and contaminants
• Supports proper alignment of the ice bin with the dispenser chute

• One dispenser bucket cover (1 piece)

• Always unplug or power off the refrigerator before removing the ice bin or replacing parts
• Remove the ice bin, position the cover, then align and secure per the unit's manufacturer instructions
• Inspect mating surfaces for debris or damaged tabs; replace any broken retainers before reinstalling

A stationary blades assembly that secures the stationary blade in place so the cutting or dispensing mechanism operates smoothly. Replacing a worn or broken assembly restores proper blade alignment and reduces noise or poor cutting performance. What it does:

• Holds the stationary blade securely to stabilize rotation and cutting action
• Maintains correct blade alignment to prevent wobble, jamming, or uneven cutting
• Helps reduce abnormal noise and vibration caused by a loose or damaged blade mount
• Restores reliable operation of the appliance's blade/dispensing mechanism when original part is worn or cracked

• One stationary blades assembly

• Disconnect power (or unplug) and turn off water supply if applicable before beginning repair
• Remove access panels or covers to reach the blade area; keep track of fasteners and trim
• Inspect mating parts (rotor, fasteners, seals) for wear and replace if damaged

This wiring harness is a factory-style wire assembly that routes power and signals between refrigerator components to restore electrical connections and proper function. It replaces damaged, frayed, or broken wire bundles to help eliminate intermittent operation or a loss of function. What it does:

• Provides the correct wires, connectors and routing to link controls, sensors, and motors
• Restores secure electrical connections when original wiring is cut, burned, or corroded
• Helps stop intermittent control issues, lights or components that work only sporadically
• Maintains OEM routing and connector fit for a reliable replacement

• One complete wiring harness assembly as pictured

• Disconnect power at the breaker or appliance plug before starting any repair
• Compare the new harness to the original to confirm connector types and lengths before installation
• Secure wiring with existing clips and retainers; avoid pinching or routing near hot components

This rear gasket cover secures the refrigerator door gasket and helps maintain a clean seal at the back edge of the door. It restores proper gasket alignment and helps reduce air leaks and moisture buildup. What it does:

• Holds the rear edge of the door gasket in place for a consistent seal.
• Helps prevent cold air loss and condensation by keeping the gasket aligned.
• Reduces rubbing and wear on the gasket edge caused by movement.
• Commonly replaced when the cover is cracked, missing, or allows the gasket to pull loose.

• One rear gasket cover.

• Remove power to the appliance before beginning any work.
• Typically installs by snapping or sliding into the door gasket channel; inspect surrounding trim for damage.
• Use basic hand tools; avoid forcing the cover to prevent breaking the part or the door.
• If gasket damage is present, replace the gasket as needed to ensure a proper seal.

This support slide holds and guides a refrigerator or freezer basket so it opens and closes smoothly, preventing sagging and keeping stored items accessible. It restores proper basket movement and alignment for safer, more reliable use. What it does

• Replaces a worn or broken slide that supports the basket and allows it to glide.
• Restores smooth in-and-out motion so the basket doesn't stick or bind.
• Prevents the basket from tipping or sagging when loaded.
• Helps reduce noise and uneven movement caused by damaged slides.

• Disconnect power to the appliance before starting any repair.
• Remove the basket or drawer to access the slide assembly; reinstall the slide in the same orientation.
• Align the slide with the mounting points and secure until it snaps/locks into place; verify smooth operation before returning items to the basket.
• Replace it with the correct OEM fasteners only.

This support slide secures and guides a refrigerator freezer basket so it opens and closes smoothly and stays aligned. It replaces worn or broken slides to restore proper basket support and movement. What it does:

• Guides the basket along its track for smooth in-and-out motion
• Helps keep the basket level and prevents it from sagging or tilting
• Replaces damaged or worn slide hardware that can cause sticking or uneven travel
• Addresses symptoms like a basket that won't slide smoothly, drops, or misaligns

• One support slide

• Turn off power to the appliance and remove stored items from the basket before starting
• Compare the old slide to the new one to confirm orientation and mounting points
• Install by aligning the slide with the mounting points and securing per OEM fastener locations

This is a replacement shelf chiller for the refrigerator chiller compartment — a single shelf that restores proper storage space and helps keep chilled items organized and cooler. Fits into the designated chiller shelf supports. What it does

• Provides a stable surface for storing chilled items in the refrigerator chiller compartment
• Restores usable shelf space after a cracked, chipped, or missing chiller shelf
• Helps maintain proper airflow around stored items when installed correctly
• Reduces the risk of spills by replacing damaged shelving

• One shelf chiller

• Disconnect power to the appliance before removing or installing shelves to avoid injury
• Remove all items from the chiller area and carefully slide old shelf out along its supports
• Align shelf with the chiller shelf supports and gently set into place; ensure it is seated and level
• Handle with care to avoid chipping or cracking; wear gloves if glass or sharp edges are present

This is a 8-18 x 1/2 inch hex washer head screw used to secure appliance panels and components. It provides a reliable, corrosion-resistant fastener for repair or reassembly tasks. What it does:

• Fastens panels, brackets or trim where an 8-18 x 1/2" screw is specified
• Hex washer head offers wider bearing surface to prevent pull-through
• Stainless finish resists rust and corrosion in humid appliance environments
• Restores proper fit and function when original screw is missing or damaged

• One 8-18 x 1/2 in. hex washer head stainless screw

• Use the correct driver/socket to avoid stripping the head
• Tighten securely but avoid over-torquing to prevent damage to plastic or thin metal parts
• Disconnect power and follow appliance safety precautions before working inside the unit
• Replace only with the same size and head style for proper fit