Gts22kgnbrww Parts

This hex-head screw secures dishwasher panels, brackets, and internal hardware so parts stay tight and rattle-free. Replace missing or stripped fasteners to restore a secure fit and reliable operation.

• Fastens panels, brackets, and other dishwasher components to the tub or frame
• Replaces a missing, stripped, or corroded screw that no longer holds securely
• Helps eliminate vibration and rattling caused by loose hardware
• Maintains proper alignment and secure mounting of parts during operation

• Disconnect power and shut off water supply before servicing
• Keep track of fastener locations and orientation for correct reassembly
• Start threads by hand; use an appropriate nut driver or socket to tighten
• Tighten snugly—do not overtighten, especially when threading into plastic

This gasket supply foam is a replacement foam seal strip used to restore a refrigerator door or cabinet seal cushion for a tighter fit and improved temperature control. It helps reduce drafts and keeps fresh food fresher. What it does:

• Replaces worn or compressed foam that can allow air leaks around the door or compartment
• Restores the gasket's shape and cushioning to improve door sealing performance
• Helps reduce humidity build-up and cycling from frequent compressor starts
• Addresses symptoms such as visible gaps, cold loss, frost buildup, or higher energy use

• Remove old foam and any adhesive residue before installing the new strip
• Use appropriate gasket adhesive and follow manufacturer instructions if required
• Work with the appliance unplugged or power turned off; keep fingers clear of pinch points

Specs: 8-32 ca hxw 1/2

This metal compressor mounting clip secures the refrigerator compressor to the base, helping keep the unit stable and reducing vibration transfer. Replaces a worn or broken clip to restore proper compressor alignment and quieter operation. What it does:

• Secures the compressor to the cabinet/base to prevent movement during operation and transport
• Helps reduce vibration and rattling that can indicate a loose or damaged mount
• Keeps the compressor aligned so refrigerant lines and mounting hardware remain correctly positioned
• Useful when the original clip is bent, cracked, or missing

• One compressor mounting clip

• Disconnect power to the appliance before beginning any repair
• Support the compressor before removing or installing the clip to avoid strain on lines or fittings
• Use appropriate hand tools; avoid over-tightening fasteners which can cause damage
• Replace rubber grommets or insulation if present and damaged for best vibration isolation

An adjustable glider leg that supports and levels the appliance base, helping keep the cabinet stable and the doors aligned for proper operation. Replaces worn, broken or bent front leveling glides. What it does:

• Replaces a damaged or worn front leveling glide to restore proper support
• Allows height adjustment to level the appliance on uneven floors
• Helps stop rocking, tilting, or uneven door gaps that affect sealing
• Prevents base scraping and reduces vibration transferred to flooring

• One adjustable glider leg

• Disconnect power and remove any stored items before working under the appliance
• Support the appliance securely before removing the old glide to avoid tipping
• Install by lowering the appliance onto the new glide and adjust height as needed per your model
• Use gloves and eye protection;

Note: This control board includes the LED Lights for the refrigerator.

The Main Control Board is an OEM part for GE refrigerators. As the "brain" of the unit, it oversees operations of temperature controls, lighting, dispensers, and cycling to maintain freshness.

Causes of malfunctions involve cumulative chip degradation under high system demand over a refrigerator's lifespan. Exposure to moisture may corrode sensitive areas over time as well.

Symptoms include:

• Unresponsive touch panels and displays  
• Inability to regulate temperatures as programmed 
• Recurring errors requiring repeated door openings

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models. 

This kit replaces the mounting hardware that secures a refrigerator/freezer door handle to the door, restoring a solid, safe grip and clean appearance when the original fasteners are missing, damaged, or stripped.

• Provides the correct hardware to attach and secure the door handle
• Helps resolve loose, wobbly, or detached handles
• Replaces missing, damaged, or stripped handle fasteners
• Supports proper handle alignment and feel

• Disconnect power (and water, if applicable) and wear gloves.
• Support the handle while removing old hardware to prevent drops or scratches.
• Start threads by hand to avoid cross-threading; tighten evenly and do not overtighten.
• The handle is secure and the door opens/closes normally.

The Ice Bucket is an OEM part for GE refrigerators. It is a component that stores ice from the icemaker in the freezer compartment. The ice bucket allows for convenient access to ice on demand, fitting seamlessly within the refrigerator design.

Symptoms of a bad ice bucket include:

• Cracks or damage to the plastic material
• Inability to easily remove or insert the bucket  
• Ice falling out of the bucket improperly
• Missing parts like the handle

Note: This is just the ice bucket. It does not include other ice maker components.

Replace your worn ice bucket before further issues arise like ice spilling in the freezer. This OEM GE part restores your refrigerator’s storage and access to ice. It is also compatible with Hotpoint, RCA, and Kenmore refrigerators.
 

This white plastic door handle replaces a broken or worn handle on compatible refrigerators, restoring a secure grip and a clean, factory look so you can open and close the door confidently.

• Provides the handhold used to open and close the refrigerator door
• Replaces cracked, broken, loose, or missing handles to improve safety and appearance
• Attaches to existing mounting points with model-specific fasteners or set screws
• Helps eliminate wobble or rattling caused by a damaged handle

• Disconnect power at the breaker before starting for safety
• Support the handle while loosening existing fasteners; note their positions and orientation
• Align the new handle; start screws by hand, then tighten evenly without overtightening
• If your model uses trim caps, install them after tightening

The Capacitor is an OEM component specifically designed for GE refrigerators with bottom-mount freezers. Located inside near the compressor unit, it aids in powering the refrigerator system during startup.

Causes of a bad capacitor include normal wear from thousands of startup cycles. Exposure to moisture or fluctuating voltages over many years can diminish performance.

Symptoms of a failing capacitor include:

• Inconsistent cooling or inability to lower temperatures
• Buzzing or humming noises from inside the fridge 
• Repeatedly tripping the power breaker 

Replacing with this genuine GE capacitor restores reliable operation. Compatible with GE bottom-freezer models, it features reliable aluminum electrolytic construction. Backed by GE quality, this replacement ensures smooth powering of the compressor for efficient cooling cycles. Compatible replacements are also available for GE Profile and GE Cafe series refrigerators.
 

The Defrost Heater Assembly is an OEM replacement part for GE refrigerators. This assembly is responsible for preventing the buildup of ice and frost on the evaporator coils by providing controlled heat during the defrost cycle. It helps prevent ice accumulation that can hinder the refrigerator's ability to cool properly.

A bad defrost heater assembly can occur due to electrical issues, component failure, or damage to the heating element. If you notice symptoms such as excessive frost or ice buildup in the freezer compartment, inconsistent cooling, or water leaking from the refrigerator, it may indicate a need to replace the defrost heater assembly.

Symptoms of a bad defrost heater assembly include:

• Excessive frost or ice buildup in the freezer compartment
• Inconsistent cooling
• Water leaking from the refrigerator

Restore your refrigerator by replacing the faulty defrost heater assembly with this genuine OEM part.

This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

This compressor start kit provides the overload protector and PTCR starting device used to help refrigerator compressors start and protect against electrical overloads. It replaces failed start components to restore reliable compressor starting. What it does:

• Supplies a PTCR (positive temperature coefficient resistor) starter to give the compressor the initial starting boost.
• Includes an overload protector that helps prevent compressor damage from electrical overload or overheating.
• Common symptom linkage: may be needed when the compressor hums but won't start, the fridge cycles without cooling, or the compressor repeatedly clicks/trips.
• Works with compressors that use separate PTCR and overload start components.

• Disconnect power to the appliance at the breaker or unplug before servicing.
• Installed at the compressor terminals; follow OEM wiring orientation and secure connections.
• Test compressor and start circuit after installation to confirm proper operation.