Gtw465asn Parts

This platform bearing retainer with fasteners secures the washer's platform bearing to the drive platform, keeping the basket aligned and stable. Replace a damaged retainer to help resolve wobble, scraping/grinding noises, or vibration during spin.

• Secures the platform bearing to the drive/platform assembly
• Maintains alignment of the spin shaft and basket for smooth rotation
• Helps prevent bearing movement that can cause noise or vibration
• Helps when the retainer is bent, cracked, corroded, or hardware is missing/loose

• Disconnect power and water before service; wear gloves and eye protection
• Access is typically from below; support the tub and remove drive components to reach the platform bearing area
• Clean mating surfaces; seat the bearing fully; tighten fasteners evenly in a crisscross pattern
• After reassembly, rotate the basket by hand and run a test cycle to check for noise or vibration

The Lid Lock Bezel is an OEM part for GE washers. This part is responsible for securing and activating the lid lock mechanism. It works with the lid lock assembly to prevent accidental opening of the lid while the washer is in use, ensuring the safety of both you and your laundry.

A bad lid lock bezel can occur due to wear and tear, damage, or electrical malfunctions. If you notice symptoms such as the lid not locking properly, the washer not starting, or error codes indicating a faulty bezel, it may be time to replace the component.

Symptoms of a bad lid lock bezel include:

• Lid not locking properly
• Washer not starting
• Error codes indicating a faulty bezel

Restore your GE washer by replacing the faulty lid lock bezel with this genuine OEM part.

This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

The Selector Switch is an OEM component specifically designed for GE washers. This switch is responsible for selecting the desired cycle and option settings on the washer control panel. 

The selector switch allows the user to choose from various wash cycles like normal, heavy duty, gentle, and sanitize. It also enables cycle customizations like soil level, water temperature, and spin speed. The switch works together with the control board to accurately coordinate all washer functions based on the selected settings.

Symptoms of a bad selector switch include:

• Unable to select any wash cycles or options
• Wash cycles not functioning as intended  
• Switch getting stuck or not responding properly
• Control panel lights/display not working correctly

Replace yours with this genuine GE OEM part to ensure your washer control interface works dependably. This replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Includes 4 selector switches and wiring harnesses

This pulley nut secures the washer's drive pulley to the shaft to keep the belt aligned and power transfer reliable. Replacing a worn or missing nut restores stable spin performance and helps prevent belt slippage and noise.

• Locks the drive pulley to the shaft for proper belt alignment and consistent power transfer
• A loose or stripped nut can cause pulley wobble, belt squeal, slippage, or the belt coming off
• Replace if the original nut is damaged, missing, or will not stay tight after adjustment

• Disconnect power and water supply; safely tip or elevate the washer for bottom access
• Remove the drive belt; hold the pulley while loosening the nut (verify thread direction—do not force)
• Hand-start the new nut to avoid cross-threading; tighten securely per service information and confirm pulley runs true
• Reinstall the belt, verify alignment, and rotate by hand before restoring power

The 1/3 HP Motor & Nut is an OEM parts compatible with GE washers. This motor powers the oscillating and spinning movements required to effectively clean clothes. 

The durable axial cam motor drives the rotation of the transmission via an integrated mounting nut. During the agitation cycle, precisely oscillates the drum back and forth to thoroughly mix clothes and wash fluid. For extraction, it rapidly spins the drum up to 400+ RPMs to remove excess water through centrifugal force. 

Symptoms of a bad motor can include:

• No rotation or agitation of the wash basket  
• Failure to spin or achieve proper speeds
• Electrical burning smells coming from the motor
• Grinding and knocking noises when running

This replacement part also fits Hotpoint, RCA, and select Kenmore appliances.

A replacement lid lock striker for top-load washers that engages the lid lock assembly so the washer lid stays securely closed during cycles. Restores safe lid latching and reliable cycle operation when the striker is worn or damaged. What it does:

• Engages with the washer's lid lock to hold the lid closed during wash and spin cycles.
• Prevents the lid from popping open mid-cycle and related cycle-interruption symptoms.
• Helps maintain proper lid alignment to reduce rattling and uneven lid movement.
• Commonly replaced when the lid won't latch, the washer won't start, or the lid rubs against the cabinet.

• Disconnect power to the appliance before attempting any service.
• Access and replacement typically require removing or opening the washer top or access panel; use basic hand tools.
• Align the striker with the lid lock mechanism and secure fasteners snugly; verify smooth engagement before final reassembly.
• If the mating lid lock assembly is damaged or worn, replace the lock and striker as needed for reliable operation.

The Transmission Assembly is an OEM part for GE washing machines. It is responsible for transferring power from the motor to the washer's agitator or drum, enabling the wash and spin cycles. This assembly ensures that the washer moves through the various stages of the cycle, allowing for thorough cleaning of laundry.

Causes of a bad transmission assembly can include wear and tear over time, damage to internal gears or bearings, or fluid leakage from the assembly. Continuous use of heavy or unbalanced loads may accelerate damage, leading to performance issues.

Symptoms of a bad transmission assembly include:

• Loud grinding or clunking noises during the wash or spin cycles
• The drum not spinning or agitating properly
• The washer stopping mid-cycle or failing to complete cycles

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Original OEM Phillips wafer head screw 8 - 18 X 3/8 inch

This lid lock harness clip secures the lid lock wire harness to the washer cabinet or top. It keeps the wiring routed and protected to help prevent chafing, snagging, and intermittent lid-lock performance issues. What it does / common symptoms:

• Holds the lid lock wire harness in place along the cabinet/top
• Maintains proper routing to avoid pinching or rubbing on moving parts
• Reduces vibration-related wear on the wiring
• Symptoms of a failed/missing clip: loose or dangling harness, scuffed insulation, intermittent lid-lock response

• 1 lid lock wire harness clip

• Disconnect power before servicing
• Access the lid lock wiring path (lift top/remove console as required by your model)
• Release the old clip from the panel and harness; snap the new clip into the mounting hole and secure the harness
• Ensure the harness has adequate slack and is not pinched before restoring power

This screw is a factory fastener used to secure appliance components. Replace a missing, stripped, or corroded screw to keep panels, brackets, and assemblies tight and help prevent vibration or rattling from loose hardware.

• Secures panels, brackets, and internal assemblies at their mounting points
• Replaces lost, rusted, or stripped hardware for a solid, reliable hold
• Helps reduce vibration, rattling, or shifting caused by loose fasteners
• 1/4-20 thread per OEM designation for proper fit where specified

• Disconnect power and, if applicable, shut off water supply before servicing
• Start threads by hand to avoid cross-threading, especially in plastic
• Tighten snugly; do not overtighten to prevent stripping or cracking
• Verify alignment and stability of the secured component after installation

This harness wire tie secures and organizes the appliance's wiring harness. Replacing a damaged or missing tie keeps wires properly routed and protected to help prevent chafing, disconnections, and vibration noise for more reliable operation. What it does:

• Bundles and anchors wiring harnesses along the intended routing path
• Helps prevent wire insulation from rubbing, pinching, or wearing through
• Reduces rattling or vibration noise from loose wires
• Common signs include a broken/missing tie, dangling wires, or visible wear on the harness

• 1 harness wire tie

• Disconnect power before servicing; allow any moving parts to stop
• Note original wire routing and mounting location; take a photo for reference
• Install the new tie at the same point and snug it just enough to secure without crushing wires; trim excess strap
• Verify wires are clear of moving or hot components before restoring power

A small mounting support that provides a stable anchor point for screws used to secure panels or internal assemblies. Replacing a damaged screw platform restores proper fastener engagement and reduces panel movement and vibration. What it does:

• Anchors screws to hold trim, panels or internal components in place
• Restores secure attachment when the original mounting point is cracked or worn
• Helps eliminate rattling, loose panels, or alignment issues caused by a failed mounting surface
• Works with the appliance's existing screws and surrounding hardware to maintain structural fit

• Disconnect power to the appliance before attempting any repair
• Use the correct screws and a properly sized screwdriver to avoid further damage
• Inspect surrounding mounting points and replace any stripped screws or damaged clips as needed

This wire harness connects your washer's control to two water valves, supplying power so they open and close at the right times. Replacing a damaged harness restores dependable water flow during fill and rinse cycles.

• Carries electrical power/signals from the control to both water valves
• Ensures valves actuate correctly during fill operations
• Helps resolve no-fill, partial/intermittent filling, or one valve not activating
• Clears valve-circuit error codes or issues from loose, burnt, or broken connectors

• Unplug the washer before servicing; turn off water supply if moving hoses
• Note/photograph original routing and connector locations; move any clips/retainers to the new harness
• Seat connectors fully on the valve solenoids; do not force—align keys to avoid pin damage
• Inspect valve coils and connector pins for heat damage or corrosion and address as needed

The Clamp is an OEM part for GE washers. It is used to securely fasten critical components like hoses, sensors, and wiring harnesses in place inside the washer cabinet. 

As a machine that handles water, chemicals, and moving parts, a washer requires many clamps to organize its internal systems. They ensure hoses and electrical wiring remain properly positioned and protected throughout years of operation. Without solid clamps, connections could loosen or detach, leading to leaks or electrical faults.

Causes of a bad clamp can include fatigue from constant vibration, outright breakage from impact or tension overload, or rust/corrosion damage over extended use. 

Symptoms of a failed clamp include:

• Loose, disconnected or damaged hoses and wiring  
• Water leaks from hose connections
• Electrical or sensor errors

The clamp is also compatible with some Kenmore and other brands that use GE components.

White top cover that protects the appliance's internal components while restoring a clean, finished appearance. Fits over the control area to help keep wiring and switches covered and reduce dirt and debris intrusion. What it does:

• Shields internal wiring, terminals and control components from spills, debris and everyday wear.
• Provides a finished surface and helps secure the control-panel area.
• Replacing a cracked, warped or missing top cover prevents exposed parts and improves safety and appearance.
• Matches white finish for a like-for-like cosmetic replacement.

• Always disconnect power to the appliance before beginning any service.
• Remove control knobs and any trim or fasteners that hold the top cover in place; follow the appliance's service manual for step-by-step removal.
• Handle edges carefully to avoid cuts or damage; check that mounting tabs and screws seat correctly during reinstallation.
• After installing, restore power and verify controls and any related components operate normally.

This clip spring cover is a small plastic retainer that secures the spring/clip assembly on compatible appliances, helping keep moving parts aligned and reducing rattles or loose components. Replaces a worn or broken cover to restore proper fit. What it does

• Covers and holds a spring or clip in place to prevent displacement during operation
• Keeps assemblies aligned to reduce noise and intermittent part contact
• Helps maintain consistent tension where a spring or clip is used
• Commonly replaced when the original cover is cracked, broken, or missing

• One clip spring cover

• High-level replacement; basic hand tools may be required to access the location
• Disconnect power (or unplug) and follow appliance safety procedures before servicing
• Inspect adjacent springs/clips for wear and replace if damaged