Gtw46oasj6ww Parts

This button tree is the group of selector buttons behind the control panel. It restores reliable button action so you can choose cycles and options when keys stick, feel mushy, or stop responding.

• Provides the push-button interface for cycle and option selections on the control panel
• Helps address unresponsive or intermittent keys
• Resolves sticking or jammed buttons
• Restores proper alignment and tactile feel

• Disconnect power to the appliance before servicing
• Remove the console/control panel to access the button tree
• Seat the new button tree so each button aligns with the control board switch positions and the overlay
• Handle the user interface board and wiring gently; do not force clips or tabs

The 1/2 HP Motor and Nut is an OEM washing machine component specifically designed for GE top-load washers. It provides the primary power source for agitation and spinning motions. 

Centrally located inside the washer base, the sturdy universal motor efficiently rotates the drive shaft through a coupling and rear axle assembly. A large hexagonal nut secures this drive hub connection with the tub.

Symptoms of a bad motor include:  

• Failure to start or complete agitation/spin cycles
• Abnormal noises such as grinding or knocking sounds  
• Motor overheating or burnt smells detected

Causes relate to normal motor coil degradation from continuous load cycling. Replacing with this authentic GE OEM part restores optimized power and torque transmission for thorough cleaning. Compatible units include select Hotpoint, RCA, or Kenmore top-load models.
 

The Platform Transmission Assembly Kit is an OEM part for GE washers. As the central mechanical linkage, this assembly connects the transmission gears to the rotor motor shaft. 

The platform trans kit includes the transmission gears, mounting hardware, and flexible coupler which transfers rotary motion from the motor to the wash basket drum. During agitation, it coordinates oscillating movement. For spin, it facilitates high-rpm extraction via a series of spinning planetary gear reductions.

Symptoms of a bad platform trans kit include:

• Erratic or no agitation movement  
• Failure to achieve proper spin speeds
• Grinding noises and vibrations during the operation
• Belt slipping off tracks or shredding

This genuine GE OEM part also fits Hotpoint, RCA, and select Kenmore units for years of reliable performance.

This platform bearing retainer with fasteners secures the washer's platform bearing to the drive platform, keeping the basket aligned and stable. Replace a damaged retainer to help resolve wobble, scraping/grinding noises, or vibration during spin.

• Secures the platform bearing to the drive/platform assembly
• Maintains alignment of the spin shaft and basket for smooth rotation
• Helps prevent bearing movement that can cause noise or vibration
• Helps when the retainer is bent, cracked, corroded, or hardware is missing/loose

• Disconnect power and water before service; wear gloves and eye protection
• Access is typically from below; support the tub and remove drive components to reach the platform bearing area
• Clean mating surfaces; seat the bearing fully; tighten fasteners evenly in a crisscross pattern
• After reassembly, rotate the basket by hand and run a test cycle to check for noise or vibration

The Lid Lock Bezel is an OEM part for GE washers. This part is responsible for securing and activating the lid lock mechanism. It works with the lid lock assembly to prevent accidental opening of the lid while the washer is in use, ensuring the safety of both you and your laundry.

A bad lid lock bezel can occur due to wear and tear, damage, or electrical malfunctions. If you notice symptoms such as the lid not locking properly, the washer not starting, or error codes indicating a faulty bezel, it may be time to replace the component.

Symptoms of a bad lid lock bezel include:

• Lid not locking properly
• Washer not starting
• Error codes indicating a faulty bezel

Restore your GE washer by replacing the faulty lid lock bezel with this genuine OEM part.

This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

The Selector Switch is an OEM component specifically designed for GE washers. This switch is responsible for selecting the desired cycle and option settings on the washer control panel. 

The selector switch allows the user to choose from various wash cycles like normal, heavy duty, gentle, and sanitize. It also enables cycle customizations like soil level, water temperature, and spin speed. The switch works together with the control board to accurately coordinate all washer functions based on the selected settings.

Symptoms of a bad selector switch include:

• Unable to select any wash cycles or options
• Wash cycles not functioning as intended  
• Switch getting stuck or not responding properly
• Control panel lights/display not working correctly

Replace yours with this genuine GE OEM part to ensure your washer control interface works dependably. This replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Includes 4 selector switches and wiring harnesses

The 1/3 Hp Motor and Nut is an OEM part for GE washing machines. This motor is responsible for driving the drum and agitator, providing the necessary motion for washing your clothes effectively. It delivers the power needed to rotate the drum and agitator, creating the necessary agitation and movement to clean your clothes thoroughly.

A bad drive motor can occur due to wear and tear over time or electrical malfunctions. If you experience symptoms such as the drum not spinning, unusual noises during operation, or a complete lack of movement, it may be time to replace the drive motor.

Symptoms of a bad drive motor include:

• Drum not spinning
• Unusual noises during operation
• Lack of movement

Restore performance of your GE washing machine by replacing the faulty 1/3 HP drive motor & nut with this genuine OEM part.

This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

This pulley nut secures the washer's drive pulley to the shaft to keep the belt aligned and power transfer reliable. Replacing a worn or missing nut restores stable spin performance and helps prevent belt slippage and noise.

• Locks the drive pulley to the shaft for proper belt alignment and consistent power transfer
• A loose or stripped nut can cause pulley wobble, belt squeal, slippage, or the belt coming off
• Replace if the original nut is damaged, missing, or will not stay tight after adjustment

• Disconnect power and water supply; safely tip or elevate the washer for bottom access
• Remove the drive belt; hold the pulley while loosening the nut (verify thread direction—do not force)
• Hand-start the new nut to avoid cross-threading; tighten securely per service information and confirm pulley runs true
• Reinstall the belt, verify alignment, and rotate by hand before restoring power

The 1/3 HP Motor & Nut is an OEM parts compatible with GE washers. This motor powers the oscillating and spinning movements required to effectively clean clothes. 

The durable axial cam motor drives the rotation of the transmission via an integrated mounting nut. During the agitation cycle, precisely oscillates the drum back and forth to thoroughly mix clothes and wash fluid. For extraction, it rapidly spins the drum up to 400+ RPMs to remove excess water through centrifugal force. 

Symptoms of a bad motor can include:

• No rotation or agitation of the wash basket  
• Failure to spin or achieve proper speeds
• Electrical burning smells coming from the motor
• Grinding and knocking noises when running

This replacement part also fits Hotpoint, RCA, and select Kenmore appliances.

A replacement lid lock striker for top-load washers that engages the lid lock assembly so the washer lid stays securely closed during cycles. Restores safe lid latching and reliable cycle operation when the striker is worn or damaged. What it does:

• Engages with the washer's lid lock to hold the lid closed during wash and spin cycles.
• Prevents the lid from popping open mid-cycle and related cycle-interruption symptoms.
• Helps maintain proper lid alignment to reduce rattling and uneven lid movement.
• Commonly replaced when the lid won't latch, the washer won't start, or the lid rubs against the cabinet.

• Disconnect power to the appliance before attempting any service.
• Access and replacement typically require removing or opening the washer top or access panel; use basic hand tools.
• Align the striker with the lid lock mechanism and secure fasteners snugly; verify smooth engagement before final reassembly.
• If the mating lid lock assembly is damaged or worn, replace the lock and striker as needed for reliable operation.

The Transmission Assembly is an OEM part for GE washing machines. It is responsible for transferring power from the motor to the washer's agitator or drum, enabling the wash and spin cycles. This assembly ensures that the washer moves through the various stages of the cycle, allowing for thorough cleaning of laundry.

Causes of a bad transmission assembly can include wear and tear over time, damage to internal gears or bearings, or fluid leakage from the assembly. Continuous use of heavy or unbalanced loads may accelerate damage, leading to performance issues.

Symptoms of a bad transmission assembly include:

• Loud grinding or clunking noises during the wash or spin cycles
• The drum not spinning or agitating properly
• The washer stopping mid-cycle or failing to complete cycles

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Platform Bearing Retainer & Fasteners is an OEM part for GE washers. It serves as a backing plate that secures the suspension assembly bearing in place on the washing machine tub. The retainer helps manage stress and distribute weight evenly across the bearing. 

Causes of a bad retainer and fasteners include worn threads, stripped holes, or loose mounting from repeated vibration and load shifting during the spin cycle.

Symptoms of a bad Platform Bearing Retainer and fasteners include:

• Excessive vibration or shaking of the washing machine tub 
• Noise or grinding sounds from the suspension assembly
• The tub not sitting level or wobbling during the operation
• Leaks caused by stress on the tub seal

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Size: 10-32 GXTT FLP.595 S

Original OEM Phillips wafer head screw 8 - 18 X 3/8 inch

Replace a failed speed sensor to restore accurate motor feedback for your washer. This sensor monitors drive speed so the control can regulate agitation and spin; when it fails, cycles can stall, stop, or skip spin. What it does:

• Monitors drive motor/basket speed and sends feedback to the control
• Enables precise regulation of agitation and spin speeds
• Failure can cause no-spin or no-agitate conditions and erratic cycle behavior
• May trigger fault codes related to speed sensing/tachometer feedback

• One speed sensor

• Disconnect power and turn off water before servicing
• Access the drive motor area (location varies by model); note connector orientation
• Transfer any mounting clip/screw if present; seat the sensor fully and secure wiring away from moving parts
• After installation, run a spin or service test to ensure proper operation

This lid lock harness clip secures the lid lock wire harness to the washer cabinet or top. It keeps the wiring routed and protected to help prevent chafing, snagging, and intermittent lid-lock performance issues. What it does / common symptoms:

• Holds the lid lock wire harness in place along the cabinet/top
• Maintains proper routing to avoid pinching or rubbing on moving parts
• Reduces vibration-related wear on the wiring
• Symptoms of a failed/missing clip: loose or dangling harness, scuffed insulation, intermittent lid-lock response

• 1 lid lock wire harness clip

• Disconnect power before servicing
• Access the lid lock wiring path (lift top/remove console as required by your model)
• Release the old clip from the panel and harness; snap the new clip into the mounting hole and secure the harness
• Ensure the harness has adequate slack and is not pinched before restoring power