Gtw750 Parts

The Rod and Spring Asm Left-Yellow is an OEM replacement part for GE washing machines. It is responsible for providing the necessary tension and support for the washer drum. This assembly includes a durable rod and spring that work together to balance the drum and minimize excessive vibrations during the wash and spin cycles.  

Symptoms of a faulty assembly include:

• Excessive shaking or vibrating during the wash cycle
• Loud banging noises
• The washer moving or walking during operation

A bad rod and spring assembly can be caused by normal wear and tear over time or damage due to heavy loads or unbalanced loads. If you notice excessive shaking, banging noises, or the washer drum moving excessively, restore the smooth and stable operation of your GE washing machine by replacing the old or damaged right-side rod and spring assembly with this genuine OEM part.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Water Inlet Valve Seal is an OEM part for GE washing machines, designed to ensure a watertight seal around the water inlet valve. This part helps prevent leaks by sealing the connection between the water inlet valve and the washing machine's internal tubing. 

Causes of a bad water inlet valve seal include normal wear and tear, exposure to hard water minerals that can erode the seal, and improper installation that may strain or damage the seal.

Symptoms of a bad Water Inlet Valve Seal include:

• Water leaking from the back or underside of the washing machine
• Visible signs of wear or damage to the seal
• Unexplained increase in water usage or utility bills, which may indicate a slow leak

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Recirculation Pump is an OEM part for GE washers. It sits within the washer base and circulates water during wash and spin cycles. The recirculation pump draws water from the tub, sending it through hoses to critical components like the dispenser and water inlet valve. 

Symptoms of a bad recirculation pump include:

• Failure to drain or fill the washer tub properly  
• Abnormal noises emitting from the pump motor area
• Visible leaks at the pump seal or connections

Causes can be worn seals, electrical failure of the pump motor, or obstructions interfering with water flow over many cycles. 

Compatible models include Hotpoint, RCA, and select Kenmore. Proper water management enables powerful cleaning for all your laundry needs.
 

The Thermistor is an OEM part for GE washers. This thermistor monitors and regulates the temperature inside your GE washer during the different cycles.

The thermistor ensures accurate temperature sensing by measuring the temperature of the water or air inside the washer and sends this information to the control board, allowing it to adjust the heating elements or cooling mechanisms accordingly.

A bad thermistor can occur due to wear and tear, exposure to extreme temperatures, or electrical malfunctions. If you notice symptoms such as the washer not heating or cooling properly, error codes indicating a faulty thermistor, or inconsistent temperature readings, it may be time to replace the component.

Symptoms of a bad thermistor include:

• Washer not heating or cooling properly
• Error codes indicating a faulty thermistor
• Inconsistent temperature readings

Restore accurate temperature control by replacing the faulty thermistor with this genuine OEM part.

This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

This washer drain hose carries used water from the drain pump to your home standpipe or laundry sink. Replacing a cracked, kinked, or leaking hose restores proper draining and helps prevent puddles and water damage.

• Directs wastewater from the washer during drain and spin cycles
• Replaces a hose that is split, brittle, kinked, or clogged
• Symptoms can include slow or no draining, water leaks during drain, or water left in the tub
• Visible wear or punctures on the hose indicate replacement is needed

• Unplug the washer and turn off water; pull the unit forward for access
• Expect residual water—use towels or a shallow pan
• Move the hose at the drain pump outlet and route to the standpipe or sink; secure with existing clamp/retainer
• Ensure a smooth, unkinked run with a proper high loop; test a drain cycle and check for leaks

The Internal Drain Hose Asm is an OEM part for GE washers. It is the hose located inside the washer that channels drained water from the tub out to the external drain system. 

Proper drainage is essential for washer operation. Causes of a bad internal hose can include cracks, kinks, or holes developing over time, especially in hoses made of brittle plastic material. Mineral buildup can also obstruct flow.  

Symptoms of a bad Internal Drain Hose Asm include:

• Puddling or pooling of water inside the washer tub after cycles
• Water not fully draining or draining slowly from the tub  
• Leaks or wet surroundings near the back of the washer

This GE replacement hose ensures your washer continues draining efficiently. This is also compatible with Hotpoint, RCA, and some Kenmore models.

The anti-siphon clip secures the washer's drain hose to a standpipe or laundry tub, maintaining the proper air gap to prevent siphoning and backflow. It keeps the hose stable so the washer fills and drains as intended.

• Maintains an air break at the drain to help stop unintended siphoning
• Holds the drain hose securely to a standpipe or sink/tub
• Helps prevent "filling and draining at the same time" or low water levels
• Helps keep the hose from vibrating loose or popping out during cycles

• Unplug the appliance and shut off water before starting
• Route the drain hose per the installation manual; avoid kinks or submerging the hose end
• Snap the clip onto the hose and fasten it to the standpipe or tub edge
• Run a quick test to verify no leaks and correct hose position

The 1/2 HP Motor and Nut is an OEM washing machine component specifically designed for GE top-load washers. It provides the primary power source for agitation and spinning motions. 

Centrally located inside the washer base, the sturdy universal motor efficiently rotates the drive shaft through a coupling and rear axle assembly. A large hexagonal nut secures this drive hub connection with the tub.

Symptoms of a bad motor include:  

• Failure to start or complete agitation/spin cycles
• Abnormal noises such as grinding or knocking sounds  
• Motor overheating or burnt smells detected

Causes relate to normal motor coil degradation from continuous load cycling. Replacing with this authentic GE OEM part restores optimized power and torque transmission for thorough cleaning. Compatible units include select Hotpoint, RCA, or Kenmore top-load models.
 

This pulley nut secures the washer's drive pulley to the shaft to keep the belt aligned and power transfer reliable. Replacing a worn or missing nut restores stable spin performance and helps prevent belt slippage and noise.

• Locks the drive pulley to the shaft for proper belt alignment and consistent power transfer
• A loose or stripped nut can cause pulley wobble, belt squeal, slippage, or the belt coming off
• Replace if the original nut is damaged, missing, or will not stay tight after adjustment

• Disconnect power and water supply; safely tip or elevate the washer for bottom access
• Remove the drive belt; hold the pulley while loosening the nut (verify thread direction—do not force)
• Hand-start the new nut to avoid cross-threading; tighten securely per service information and confirm pulley runs true
• Reinstall the belt, verify alignment, and rotate by hand before restoring power

The User Interface and Control Board with WiFi is an OEM part for GE washing machines. As the central processing unit, it operates all wash cycle and programming functions while enabling WiFi connectivity for remote start capabilities.

Causes of failure can include moisture damage compromising electrical components, short circuits from age or excessive wear/stress, or incompatibility issues preventing communication between newer interfaces and older machines.

Symptoms include: 

• Fault codes displayed 
• Non-responsive buttons and displays
• Inability to start or stop cycles remotely 
• Failure to advance through wash phases

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models featuring WiFi home connectivity.

The Impeller Cap is an OEM part for GE washers. As an integral part of the wash pump assembly, it covers and protects the impeller during operation. Located inside the wash tub, the impeller cap covers the spinning wash impeller that circulates water through the garments. 

Symptoms of a bad impeller cap include:  

• Excessive vibration or strange noises from the pump motor
• Reduced or inconsistent water pressure inside the tub  
• Broken or missing pieces found in the tub after cycles
• Premature failures of the impeller or pump bearing

Causes may involve cracks developing from mineral buildup or wear over time. Improper handling during maintenance can also warp weak points.  

This genuine GE replacement is compatible with Hotpoint, RCA and select Kenmore models.

The Lid Lever Arm is an OEM part for GE washing machines. This component is crucial for the proper functioning of the washer's lid mechanism, ensuring that the lid locks securely during operation and allows for safe and efficient washing cycles.

Over time, the lid lever arm can become worn out or damaged due to regular use, improper handling, or mechanical failure. Causes of a bad lid lever arm include physical damage, wear and tear from repeated use, or issues with the linkage that connects it to the locking mechanism.

Symptoms of a bad lid lever arm include:

• The washer lid not locking properly
• The washing machine not starting or pausing unexpectedly
• Error codes related to lid lock issues
• The lid feeling loose or misaligned

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This lid lock harness clip secures the lid lock wire harness to the washer cabinet or top. It keeps the wiring routed and protected to help prevent chafing, snagging, and intermittent lid-lock performance issues. What it does / common symptoms:

• Holds the lid lock wire harness in place along the cabinet/top
• Maintains proper routing to avoid pinching or rubbing on moving parts
• Reduces vibration-related wear on the wiring
• Symptoms of a failed/missing clip: loose or dangling harness, scuffed insulation, intermittent lid-lock response

• 1 lid lock wire harness clip

• Disconnect power before servicing
• Access the lid lock wiring path (lift top/remove console as required by your model)
• Release the old clip from the panel and harness; snap the new clip into the mounting hole and secure the harness
• Ensure the harness has adequate slack and is not pinched before restoring power

This replacement siphon cap fits the washer's dispenser assembly. The insert creates the siphon action that empties the additive cup during the rinse cycle, helping prevent standing liquid and residue so liquid additives dispense as intended.

• Forms a siphon in the dispenser cup so liquids empty at the proper time
• Helps reduce standing water and residue buildup in the dispenser
• A worn or missing cap can contribute to odors or buildup in the dispenser area

• Unplug the washer and turn off water before servicing
• Remove the dispenser drawer or cup and lift out the old siphon cap
• Clean the dispenser area; press the new cap in firmly so it seats evenly
• Reinstall the drawer/cup and run a rinse to ensure proper dispensing

The Glass Frame Assembly is an OEM component specifically designed for GE top-load washing machines. It provides a stable mounting point and seals for the door window opening. 

Situated on the interior door panel, the plastic frame surrounds and supports the edge of the viewing glass. Its perimeter gasket forms a water-tight seal during agitation to prevent leaks. Proper assembly enables easy door closure while preventing water damage into interior controls.

Causes of damage can include wear from repeated door swings, cracking from pressure changes during heavy-duty cycles, or separation due to excessive impact. 

Symptoms of a bad glass frame assembly include:

• Loose or detached glass within the door window 
• Visible water intrusion or moisture inside the door panel
• Compromised seals resulting in leaking during wash

Replacing with this authentic GE OEM part restores optimized window mounting and door sealing integrity. Compatible units include select Hotpoint, RCA, or Kenmore models.

This screw is a factory fastener used to secure appliance components. Replace a missing, stripped, or corroded screw to keep panels, brackets, and assemblies tight and help prevent vibration or rattling from loose hardware.

• Secures panels, brackets, and internal assemblies at their mounting points
• Replaces lost, rusted, or stripped hardware for a solid, reliable hold
• Helps reduce vibration, rattling, or shifting caused by loose fasteners
• 1/4-20 thread per OEM designation for proper fit where specified

• Disconnect power and, if applicable, shut off water supply before servicing
• Start threads by hand to avoid cross-threading, especially in plastic
• Tighten snugly; do not overtighten to prevent stripping or cracking
• Verify alignment and stability of the secured component after installation