Gtwn 4250D1ws Parts

This mounted board assembly is a direct-replacement control board that manages electronic functions and signals for the appliance, restoring reliable control of user inputs, displays, and cycle operations. What it does:

• Processes user inputs and front-panel commands so the appliance responds correctly
• Controls timing, relays and outputs that run heaters, motors or valves
• Provides the electronic interface for display lights and status indicators
• Replaces a damaged or failed control board that can cause unresponsive controls or erratic operation

• One mounted board assembly

• Disconnect power before removing the old board to avoid shock or damage
• Handle the board by its edges and avoid touching components; static discharge can damage electronics
• Verify connector orientation and seating; confirm screw locations before tightening

This knob assembly replaces a worn, cracked, or missing control knob to restore reliable user control and a finished appearance. It snaps or mounts onto the control shaft to allow easy temperature or function selection. What it does

• Replaces damaged or broken control knob that is loose, cracked, or won't turn smoothly
• Allows the user to select settings by turning the control shaft with firm tactile feedback
• Restores cosmetic finish and consistent control operation
• Fits and engages the control shaft to transmit user input to the switch or valve

• Disconnect power to the appliance before servicing; for gas models, shut off gas supply and follow all safety precautions
• Most installations require pulling the old knob straight off the shaft and pushing the new knob into place; some models may use a retaining clip or set screw
• Avoid forcing the knob; align splines or D-shaft flat before seating to prevent damage

Single-speed PSC motor that restores rotational drive to the appliance. Replaces a worn or failing motor to stop humming, no-spin or intermittent operation and helps return steady rotation when the rest of the drive system is serviceable. What it does:

• Converts electrical power into mechanical rotation to drive the appliance's rotating components.
• Common signs a motor needs replacement: humming, no rotation, slow or intermittent rotation, or unusual motor smells.
• Replaces a failed motor to restore normal, consistent rotation when the motor is the root cause.
• Designed for direct replacement where the same mounting and wiring are used.

• Always disconnect power to the appliance before beginning service.
• Follow the appliance service manual and wiring diagrams; label or photograph connections before removal.
• Support drum/assembly as required when removing or installing the motor; avoid strain on wiring.

This suspension rod and spring assembly supports the washer tub and absorbs movement during spin. Replacing a weak or broken rod can reduce vibration and out-of-balance interruptions to keep cycles running smoothly. What it does:

• Supports and centers the wash tub within the cabinet
• Absorbs vibration and tub movement during agitation and spin
• Worn or broken rods can lead to shaking, banging, walking, or the tub leaning to one side
• Restores stability to help minimize noise and out-of-balance pauses

• One suspension rod with attached spring

• Disconnect power and turn off water supply before servicing
• Support the tub to relieve spring tension before removing the rod; springs are under tension
• Replace one rod at a time to keep the tub supported
• For consistent damping and balance, consider replacing all suspension rods together

This rotor motor is the rotating motor assembly that spins the appliance rotor to enable proper rotation. It replaces a worn or failed rotor motor to restore normal rotating function and reduce noise. What it does:

• Drives the rotor/turning assembly so the rotor or turntable rotates smoothly
• Replaces a motor that has stopped turning or only hums without spinning
• Can eliminate intermittent rotation or noisy operation caused by a failing rotor motor
• Restores consistent rotation for even operation of the appliance's rotating components

• Disconnect power before beginning any repair to avoid shock or injury
• Remove access panels and mounting screws to access the existing rotor motor
• Note wiring locations or label connectors before disconnecting to ensure correct reassembly
• Test rotation after installation; if issues persist, inspect related parts (mounts, couplings, wiring)

A #8-18 x 9/16-inch hex washer head screw used to secure panels and components in appliances. Provides a proper fit for fast, reliable fastening when replacing missing, damaged, or stripped screws. What it does:

• Secures panels, brackets, and trim to keep components aligned and stable.
• Restores proper fastening when threads are stripped, the original screw is missing, or a head is damaged.
• Helps stop rattling or loose parts caused by worn or broken fasteners.
• Fits applications requiring a #8-18 thread with a 9/16" length and hex washer head style.

• Verify thread size, head style, and length before installation.
• Use the correct hex driver or socket to avoid cam-out or head damage.
• Do not overtighten; snug until secure to avoid stripping threads or deforming parts.
• Disconnect power and follow appliance-specific safety steps.

Includes 12 screws.

This clip cover is a small snap-in plastic trim piece that protects and secures appliance panels or trim, giving a finished look and hiding fasteners. Replaces broken or missing covers to restore appearance and retention. What it does:

• Snaps into place to conceal screws or clip anchors on trim and panels
• Helps hold lightweight trim pieces securely to the cabinet or frame
• Prevents exposed fasteners and reduces snagging or sharp edges
• Useful when cracked, worn or lost covers cause loose or rattling trim

• One clip cover

• Disconnect power or unplug the appliance before accessing panels or trim
• Push the clip cover onto the mating clip or anchor until it snaps fully into place
• Use a small flat tool only to remove; avoid prying on surrounding trim to prevent damage
• Replace any damaged mounting clips before installing the cover for a secure fit

This clip spring cover is a small plastic retainer that secures the spring/clip assembly on compatible appliances, helping keep moving parts aligned and reducing rattles or loose components. Replaces a worn or broken cover to restore proper fit. What it does

• Covers and holds a spring or clip in place to prevent displacement during operation
• Keeps assemblies aligned to reduce noise and intermittent part contact
• Helps maintain consistent tension where a spring or clip is used
• Commonly replaced when the original cover is cracked, broken, or missing

• One clip spring cover

• High-level replacement; basic hand tools may be required to access the location
• Disconnect power (or unplug) and follow appliance safety procedures before servicing
• Inspect adjacent springs/clips for wear and replace if damaged

8-18 hi/lo 5/8

Size: 8-32 t. Includes 12 screws.

This replacement knob assembly restores a worn, cracked, or missing control knob so you can select settings with a secure grip and clear position indicator. Designed as a direct-fit control knob for compatible GE appliances. What it does

• Replaces a damaged or missing control knob to restore manual control of a setting or function
• Provides a clear indicator for accurate position selection
• Fits onto the appliance control shaft and stays secure during normal use
• Helps resolve symptoms like a loose, stripped, cracked, or non-turning knob

• Disconnect power to the appliance before beginning any repair
• Remove the old knob by pulling it straight off the control shaft; align and push the new knob fully onto the shaft until seated
• Test control function after restoring power; do not force a knob that does not fit

This hex nut overmold assembly secures appliance components while the molded sleeve protects surrounding surfaces and reduces vibration. It replaces worn or missing fasteners to restore a secure fit and help prevent rattling or movement. What it does:

• Provides a threaded fastening point for panels, trim, or internal brackets
• Molded overmold sleeve protects finishes and helps isolate vibration
• Restores secure mounting when a nut is stripped, missing, or loose
• Helps reduce rattling and movement of attached parts

• Disconnect power and follow appliance-specific safety procedures before starting
• Tighten by hand then snug with the appropriate wrench; avoid overtightening to prevent damaging the molded sleeve

This Lid Lock Service Kit replaces the washer lid lock assembly to restore a secure latch and allow normal cycle operation. It helps prevent the lid from opening during spin for safe, reliable use. What it does:

• Replaces a worn or damaged lid lock assembly so the lid secures during spin cycles
• Can resolve symptoms like the washer not starting, stopping mid-cycle, or showing lid-lock related errors
• Restores the mechanical/electrical interface that detects and locks the lid for safe operation
• Works as a direct replacement for the original lid lock components

• Disconnect power to the washer before starting any repairs to avoid electrical shock
• Access and remove the existing lid lock per the parts diagram; handle wiring connectors and fasteners carefully
• Verify proper alignment of the latch and test the lid lock function through a diagnostic or a short test cycle after installation

This suspension rod and spring assembly supports the washer's tub assembly and controls movement during agitation and spin. Replacing a fatigued rod helps reduce vibration and banging, restoring smoother operation and helping prevent out-of-balance interruptions.

• Suspends and centers the tub assembly within the cabinet
• Dampens motion to minimize vibration and noise during spin
• Helps prevent the tub from striking the cabinet during high-speed cycles
• Worn rods/springs can cause shaking, banging, or a tub that leans to one side

• Disconnect power and turn off water before servicing; wear gloves and eye protection
• Access the suspension; support the tub before removing any rod
• Carefully relieve spring tension and seat the new rod fully in upper and lower mounts
• Re-level the washer and run a test cycle to verify smooth operation

This bracket secures the refrigerator door counterweight, helping the door stay balanced for smooth opening and closing. Replacing a damaged bracket restores proper weight support and prevents door sag or misalignment. What it does:

• Holds the counterweight assembly in place on the door to maintain balance
• Prevents the counterweight from shifting or falling during door movement
• Helps reduce door sag, sticking, or uneven closing when functioning correctly
• Works with the existing counterweight and mounting hardware to stabilize the door

• One bracket counterweight

• High-level task: typically accessed from inside the door panel; follow OEM disassembly steps
• Always unplug the appliance before starting work and support the door to prevent injury
• Keep all mounting screws and the counterweight assembly together for reinstallation