Hda1106-45Ba Parts

This is a genuine replacement screw used to secure components and panels on compatible GE appliances. It restores proper fit and prevents rattling or loose parts for safe, reliable operation. What it does:

• Secures panels, brackets, or internal components to maintain proper alignment
• Stops rattling or vibration caused by loose fasteners
• Replaces missing, stripped, or damaged screws to restore safe operation
• Helps maintain seals and clearances by holding parts firmly in place

• Screw

• Disconnect power to the appliance before starting any repair
• Use the correct screwdriver or bit to avoid stripping the head
• Do not overtighten; snug until secure to prevent damage to components
• Keep removed fasteners organized to ensure correct reassembly

The Lower Dishrack is an OEM part for GE dishwashers. It provides a sturdy shelf for placing pots, pans, plates, and other dishware on the bottom level of the dishwasher interior. The lower dishrack supports dish loads, holding them securely in place during the wash cycles. 

Causes of a failing lower dishrack include long-term wear and tear, corrosion from exposure to water and detergents, damage from improper loading, and loose or broken components.

Symptoms of a bad lower dishrack:

• Difficulty sliding the rack in and out
• The rack getting stuck mid-cycle
• Broken or missing wheels/rollers
• Rust formation
• Bent or misshapen wires

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Spring Timer Lever is an OEM part for GE dishwashers. This small but crucial component works in conjunction with the control timer to advance the dishwasher through each phase of the cycle. It engages the timing mechanism using applied spring pressure to ensure programs run as specified. 

Symptoms of a bad spring timer lever include: 

• The dishwasher fails to advance through cycles properly
• Long wash cycles 
• The unit getting stuck and not progressing the wash

Causes of failure involve wear and tear over time, damage or deformation of the spring, or an inability of the lever to effectively engage the timer. 

This authentic GE replacement part helps maintain precise wash times and optimal cleaning performance. It is designed to OEM specifications for a perfect fit and direct replacement.
 

This bearing hinge arm replaces a worn or damaged door hinge on compatible GE laundry appliances, restoring smooth opening and secure door alignment for safe, reliable use. It provides a stable pivot point and reduces binding and noise. What it does:

• Supports the appliance door and provides a smooth pivot with an integrated bearing
• Prevents door sag and helps maintain proper door seal and alignment
• Reduces squeaks, grinding, or sticking when opening and closing the door
• Restores secure door movement after hinge wear or damage

• One bearing hinge arm

• Disconnect power and water before starting any repair
• Remove the door or access panel to reach hinge mounting hardware
• Reuse existing fasteners only if undamaged; tighten hardware securely but avoid over-torquing
• Check door alignment and operation after installation; if binding persists, inspect other hinge or strike components

This SCR (silicon-controlled rectifier) is a control-circuit power-regulation component that helps manage electrical flow to appliance subsystems for reliable operation and stable control response. What it does:

• Regulates power flow in an appliance's electronic control circuit for proper component operation
• Helps enable consistent motor, heater, or timing control where used on the control board
• Faulty SCRs can cause intermittent operation, failure to start, or erratic control behavior
• Replacing a damaged SCR can restore steady, predictable appliance function

• Disconnect power to the appliance before servicing to avoid shock hazard
• Handle as an electronic/ESD-sensitive component; use proper grounding and avoid static discharge
• Some installations require soldering or board-level replacement—inspect mounting and connections carefully

This cap seals the washer sump area to help prevent leaks and keep water contained during cycles. It replaces a worn or damaged sump cap to restore a watertight seal and normal draining. What it does:

• Covers and seals the sump opening to prevent water from leaking out of the pump/sump area
• Helps maintain proper drainage by keeping contaminants out of the sump cavity
• Common part to replace when you see water pooling under the washer or around the base
• Fits the sump/pump assembly area and works with existing seals and hoses

• One cap sump

• Disconnect power and water before starting any repair
• Access usually requires removing the washer's lower access panel or front panel; follow your model's service manual
• Inspect nearby seals, hoses and the pump for wear; replace any damaged components to prevent repeat leaks

This timer cover is the replacement trim that surrounds and protects the dryer or washer control timer on the control panel, restoring a finished look and shielding the timer mechanism from dust and debris. What it does:

• Replaces a cracked, faded, or damaged timer trim to improve appearance and protect the underlying timer assembly
• Helps keep lint, dust, and moisture away from the timer control area
• Restores correct alignment and mounting for the timer knob and control components
• Useful when the existing cover is loose, broken, or missing

• One timer cover

• Disconnect power (unplug or switch off breaker) before starting any repair
• Remove the control panel or access bezel per your model's service instructions to reach the timer cover
• Use appropriate hand tools (screwdriver) and avoid forcing plastic tabs to prevent breakage

This left-side door arm hinge secures and guides the appliance door, restoring proper alignment and smooth opening/closing. It replaces a bent or broken hinge to reduce sagging and uneven door movement. What it does:

• Supports the door on the left side and helps control its travel and position
• Restores proper door alignment when a hinge is bent, worn, or broken
• Helps eliminate door sagging, scraping, or uneven closing
• Works with existing hinge pins and mounting points to stabilize the door

• One left-side arm hinge

• Installation requires basic hand tools; refer to your model's service manual for step-by-step instructions
• Disconnect power (and water for washers) before starting any repair
• Inspect adjacent hinge hardware and fasteners; replace if worn to ensure proper fit and function

This right-hand arm hinge secures and guides the appliance door or access panel for proper alignment and smooth operation. It replaces a worn or broken hinge to restore correct door movement and positioning. What it does:

• Attaches the door to the cabinet and provides a pivot point for opening and closing
• Keeps the door aligned to prevent sagging, gaps, or rubbing
• Restores smooth, consistent door motion when the original hinge is bent, worn, or broken
• Helps reduce stress on the door and adjacent components caused by misalignment

• Install with power disconnected and appliance stable to avoid injury
• Tighten mounting fasteners securely but avoid over-torquing to prevent damage
• If replacing both sides or multiple components, inspect companion hinge and fasteners for wear

This fill funnel gasket seals the water-inlet funnel where water enters the dishwasher tub. Replacing a worn seal helps prevent drips at the inlet and keeps incoming water directed into the tub during the fill cycle.

• Provides a watertight seal between the fill funnel and tub wall
• Helps prevent leaks from the inlet area and under the toe-kick
• Directs incoming water properly into the tub during fill
• Replace if the gasket is cracked, deformed, or leaking

• Disconnect power and turn off the water supply before servicing
• Access the fill funnel area; remove the old gasket and clean the sealing surfaces
• Seat the new gasket evenly and ensure the funnel fully engages the opening
• Reassemble and run a short fill to check for leaks

This impeller kit restores reliable water movement inside the dishwasher pump. A worn or damaged impeller can lead to weak circulation, louder operation, and poor wash results; replacing the kit helps return normal pressure and performance. What it does:

• Drives water flow through the pump during wash cycles
• Helps maintain proper wash pressure for effective cleaning
• Can reduce grinding or rattling noises from the pump area

• Includes 1 impeller kit

• Disconnect power and shut off water before servicing
• Access the pump/sump area and note the orientation of parts during disassembly
• Inspect the pump housing and any seals/O-rings; replace worn components per your model's service information
• After reassembly, run a short cycle to check for leaks and strong water movement