Jds885obds Parts

This is a replacement 6-32 x 3/8" screw used to secure panels and components on compatible Whirlpool appliances. It restores proper fastening for loose or missing fasteners so parts stay aligned and stable. What it does:

• Secures trim, panels, brackets or small components to the appliance frame
• Stops rattling or movement caused by a missing or stripped screw
• Helps maintain proper alignment of control panels and access panels
• Provides the correct thread engagement for safe, stable fastening

• One replacement screw (6-32 x 3/8")

• Disconnect power before accessing internal components
• Use the correct screwdriver or nut driver to avoid stripping the head
• Thread carefully and do not overtighten to prevent damage to threads or components
• Keep removed hardware organized and compare sizes before installation

This switch harness assembly routes signals from a left-side switch to the appliance control so the machine detects door/lid or control inputs and operates correctly. It restores reliable electrical connection between the switch and main wiring. What it does:

• Provides the factory-style wiring connection between a left-side switch and the main control board
• Carries switch signals so the appliance recognizes door/lid position or user inputs
• Commonly replaced when an appliance won't start, doesn't register switch actions, or has intermittent control behavior
• Maintains correct wire routing and secure terminal connections to prevent loose or shorted circuits

• Disconnect power (unplug or shut off breaker) before starting any repair
• Inspect connectors and match terminals to factory routing before final assembly
• May require access by removing a control panel or cabinet trim; keep small fasteners and clips organized

Color: White. Size: 13 oz. Spray paint primer. can.

This dual orifice holder secures two burner orifices in gas ranges, keeping the burner orifices aligned for proper gas flow and stable flames. It helps restore consistent ignition and even heat across affected burners. What it does:

• Holds and positions two burner orifices in the manifold or burner assembly
• Keeps orifices aligned to ensure proper gas flow to each burner
• Can resolve symptoms like weak, uneven, or inconsistent burner flames and ignition problems
• Works as a replacement for damaged, corroded, or bent orifice mounting hardware

• One dual orifice holder

• Turn off gas supply and electrical power before servicing; follow local codes
• Remove burner caps and access the orifice area per your model's service instructions
• Retain correct orientation when installing; avoid bending or stressing the orifice

This is a Whirlpool oven control board. The oven control board sits behind the main user interface assembly. This board works in direct conjunction with the buttons on the interface to control the vital functions of the oven, such as bake, broil, and self-cleaning. Telltale signs of a malfunctioning control board are smells of burning plastic coming from the interface and losing one or more oven functions. Immediately discontinue using the appliance if a shorted control board is suspected. Begin installation by unplugging the oven from the power source. Open the oven door and remove the screws beneath the control board assembly. On the sides of the control assembly, two tiny screws hold it in place. Remove these, and with a slight pull, the user interface should pop off. The control board is directly behind the main assembly and is held by either two tiny screws or clips that loosen with a flat head screwdriver. Remove the control board from the wiring harness and begin installing the new component.This product is sold individually and is sourced directly from the manufacturer as a genuine OEM part. This product is compatible with Whirlpool and Jenn Air appliances.

This igniter switch controls power to the oven/range igniter so burners light reliably. It replaces a worn or failed switch to restore normal spark/ignition operation and help the appliance heat safely and consistently. What it does:

• Routes electrical power to the gas igniter when the control calls for heat
• Commonly replaced when the range/oven fails to light or sparks inconsistently
• Helps restore reliable ignition and prevent no-heat or intermittent-lighting symptoms
• Works as the electrical actuation point between the appliance control and igniter

• One igniter switch

• Disconnect power to the appliance before inspecting or replacing the switch
• For gas appliances, also shut off the gas supply and verify no leaks after service
• Inspect wiring and connectors for damage; use matching connectors and secure grounding

Color: Stainless

Color: Stainless. For the front matching drawer stainless panel order WPW10297248.

This glass mounting bracket secures the oven door glass to the door frame, restoring a stable, properly aligned door and helping prevent rattling or loose glass. Designed to replace a worn, broken, or missing bracket. What it does:

• Holds the oven door glass in place so the door closes and seals correctly
• Prevents glass from shifting, rattling, or coming loose during use
• Restores proper alignment after a cracked, bent, or missing bracket
• Works with the door assembly to maintain safe, reliable operation

• Disconnect power to the appliance before beginning any repair; allow surfaces to cool.
• Handle glass carefully and wear cut-resistant gloves and eye protection.
• Replacement typically requires partial door disassembly; keep fasteners organized for reassembly.
• Tighten fasteners securely but avoid over-torquing; inspect surrounding clips and gaskets while installing.

A set of four valve mounting screws used to secure the water/ice valve or valve bracket in place. These OEM-style screws restore proper valve alignment and fasten valve assemblies for reliable operation. What it does:

• Secures the valve or valve bracket to the appliance chassis to prevent movement during operation
• Helps maintain a tight seal at valve mounting points to reduce risk of leaks
• Replaces missing, stripped, or corroded valve mounting fasteners
• Restores stable valve positioning that can prevent rattling or vibration

• Disconnect power and shut off the water supply before beginning any work
• Use the correct screwdriver or bit to avoid stripping the screw heads
• Thread screws in by hand first, then tighten snugly—do not overtighten to avoid damaging the valve or mounting threads
• If existing threads are damaged, inspect the mounting boss and replace as needed

Color: Black. Round