Jed2295kes Parts

A replacement support bracket that secures the oven heating element in the cavity so the element stays properly positioned for safe, even heating and reliable operation. Restores stable mounting after breakage or wear. What it does:

• Holds the bake/oven heating element in place so it doesn't sag or contact the oven cavity
• Helps maintain consistent heating and prevents element movement or rattling during use
• Commonly used when the existing support is cracked, bent, or missing
• Works with the oven's internal mounting points to align the element correctly

• Always disconnect power to the appliance before starting any repair
• Handle the heating element carefully; support may attach directly to the element terminals or mounting studs
• Basic hand tools are typically required; refer to your model's service instructions for exact steps

The Air Duct is an OEM part for Whirlpool cooktops. It is responsible for venting heat and combustion gases out of the oven cavity during and after the cooking process. The air duct is designed to withstand high temperatures while rapidly expelling air and fumes through the outlet vent. 

Symptoms of a bad air duct include:

• Smoking or burning smells from the oven 
• Incomplete combustion resulting in inefficient heating
• Reduced airflow causing decreased cooking power

Over time, continued exposure to heat can cause cracks, warping, or damage to the air duct.

This replacement is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This 100-watt surface element is the replacement warmer element used to keep food warm in compatible appliance warming drawers and compartments. Restores low-level heat so dishes stay at serving temperature between cooking and serving. What it does

• Provides low, consistent heat for warming drawers or warming compartments
• Replaces a failed or weak warmer element that no longer heats or maintains temperature
• Helps eliminate cold spots or inability to hold food at serving temperature
• Works as the heating source; element must be intact and wired correctly to function

• One 100W surface warmer element

• Disconnect power to the appliance before servicing to avoid electric shock
• Handle the element and surrounding surfaces carefully; glass and ceramics can be fragile
• Verify electrical connections and mounting fit before final reassembly

This rear trim is a factory-style replacement piece that restores the finished back edge of your 30-inch range or cooktop for a clean, factory look and to help protect internal components from debris. What it does:

• Covers and finishes the rear edge of the cooktop or range for a factory appearance
• Helps block dust, grease and debris from entering the control or rear cavity area
• Replaces damaged, bent or missing trim that can catch food and interfering particles
• Fits the standard 30-inch width for compatible Whirlpool-style ranges

• One rear trim piece (30-inch)

• Disconnect power to the appliance before attempting any service
• Usually secures with screws or clips at the rear; inspect mounting points before installation
• Handle carefully to avoid scratching the finish; use appropriate tools and protective gloves

This locknut is a small threaded retaining nut used to secure rotating and stationary appliance components, helping keep assemblies tight and stable during operation. It prevents parts from loosening and reduces vibration-related issues. What it does:

• Secures shafts, pulleys, or fittings to prevent axial movement
• Keeps assemblies fastened under normal vibration and load
• Helps stop wobble, grinding, or part separation caused by a loose connection
• Works with the matching threaded stud, shaft, or fitting for a proper hold

• Disconnect power and follow appliance safety procedures before servicing
• Use the matching thread size and engage threads fully; hand-start before tightening
• Tighten securely without overtightening; use the correct driver or socket for the nut
• Inspect mating threads and replace if damaged

This replacement control knob restores a worn or broken stove/oven control interface so you can set temperatures and heat levels accurately. It fits onto the appliance's control shaft for reliable operation. What it does

• Replaces a damaged, cracked, or missing control knob so settings can be changed easily.
• Engages the control shaft spline to select oven/range heat or function positions.
• Helps eliminate slipping or loose-feel when turning the control.
• Appropriate when the original knob is stripped, hard to grip, or will not stay in place.

• Disconnect power to the appliance (and shut off gas if applicable) before servicing.
• Align the knob with the splined control shaft and push straight on until fully seated; do not force.
• If the shaft spline is damaged or the new knob does not fit securely, the control/switch may need replacement.
• Use basic hand tools only; for any electrical or gas-related repairs.

This is a replacement cooktop trim piece that restores the finished edge around your cooktop for a clean, factory look and helps cover gaps between the cooktop and countertop. Ideal for replacing damaged or bent trim. What it does:

• Replaces worn, dented or scratched cooktop edging to improve appearance
• Covers gaps at the cooktop edge to restore a flush, finished look
• Helps stabilize the cooktop perimeter and reduce rattling or movement
• Matches OEM fit and mount points for a secure replacement

• Disconnect power to the appliance before beginning any work.
• Remove screws or clips securing the old trim; handle edges carefully—parts may be sharp.
• Align new trim to OEM mounting points and secure with original fasteners.

This replacement drip tray catches and channels excess water beneath the appliance to help prevent puddles and floor damage. It restores the original drain path so condensate and minor leaks drain safely away. What it does:

• Collects and directs water away from the appliance base to prevent pooling on the floor
• Helps contain leaks from defrost or drain systems to limit damage to surrounding areas
• Can reduce musty odors and water stains caused by trapped moisture
• Fits into the appliance base to restore original water collection and drainage

• One drip tray

• Disconnect power to the appliance before servicing
• Remove lower access panels or kickplate as needed to access the tray
• Align the tray with the chassis rails or mounting tabs and slide or snap into place
• Inspect surrounding seals and drain paths; if you find corrosion or other damage, replace those parts as needed.

This plenum directs and channels airflow through the appliance's ventilation pathway to help maintain proper air movement and performance. Replacing a damaged plenum restores intended airflow routing and helps prevent leaks. What it does:

• Channels air from the blower/vent to the exhaust or internal ducts
• Helps maintain consistent airflow for efficient operation
• Prevents air leaks that can reduce performance or cause unusual noises
• Supports proper venting to limit heat buildup in the appliance

• Inspect surrounding seals and duct connections; replace damaged gaskets for a proper seal
• Disconnect power before accessing internal components to avoid shock
• Handle plastic housings carefully to avoid cracking; align clips/tabs before fastening
• Tighten fasteners snugly but do not overtighten to prevent warping

This touch control board replaces the oven's user-interface electronics to restore touch pad functionality and control of cooking functions. It provides a direct-fit replacement for the appliance's front control cluster and restores reliable input response. What it does

• Receives touch inputs and sends commands to the oven's control system so settings like temperature and timers respond correctly.
• Can resolve unresponsive or intermittent touchpad behavior and missing or incorrect control responses.
• Works with the range/oven's control system; does not include display wiring beyond the factory-connected assembly.

• Disconnect power to the appliance at the breaker before starting any service to avoid shock risk.
• Replace the board from the back of the control panel; some models require removing the oven top or control console—refer to the OEM service guide.
• Handle the board carefully to avoid damage from electrostatic discharge; use proper grounding.

This wire cover is a protective sleeve that helps route and shield appliance wiring to reduce wear and prevent accidental contact. It restores a neater harness run and helps maintain safe electrical routing inside the appliance. What it does:

• Protects wires from abrasion and chafing against sharp edges or moving parts
• Helps prevent exposed conductors that can cause shorts, arcing, or burning smells
• Keeps wiring bundled and routed to reduce pinching and stress on connectors
• Reduces risk of intermittent electrical issues caused by damaged insulation

• Disconnect power before beginning any service to avoid shock or injury
• Inspect surrounding wiring and connectors for damage; replace any frayed or exposed wires
• Slide cover over the wiring harness or route harness through sleeve as needed; secure with existing clips or approved fasteners

This is the cooktop upper glass surface that provides the flat cooking area and houses the heating elements, restoring the look and function of your range. It replaces a cracked, scratched or damaged cooktop surface so cookware sits level and heats properly. What it does:

• Replaces the damaged or cracked cooktop top so burners/heating elements are protected and cookware rests evenly
• Prevents heat loss and reduces risk of food spills contacting internal components
• Helps restore a smooth, easy-to-clean cooking surface and improves appliance appearance
• Compatible with electric range heating elements that mount into the cooktop top

• One cooktop upper glass surface

• Replace only when appliance is disconnected from power; follow OEM disconnection procedures to avoid shock
• Handle carefully to avoid chipping or cracking the glass during installation

Color: Frost White