Jgb700 Parts

This is a replacement screw used to secure appliance panels and small components. It restores proper fastening and helps eliminate loose parts, rattling, or misaligned panels for a tight, safe fit. What it does:

• Secures panels, trim, brackets, or small assemblies to restore proper alignment
• Stops rattling or vibration caused by missing or loose fasteners
• Provides the correct threaded fastening where the original screw is lost or damaged
• Matches OEM fastening function for reliable reassembly

• Disconnect power or unplug the appliance before starting any repair
• Use the correct screwdriver or driver bit to avoid stripping the head
• Thread the screw in by hand first, then tighten snugly—do not overtighten to avoid stripping or cracking
• Keep small parts away from children and pets during installation

This cable clamp secures the appliance power cord where it enters the cabinet, protecting wiring from pull and chafe for safer, more reliable operation. Designed to hold the cord firmly in place and prevent accidental disconnection. What it does:

• Acts as a strain relief to prevent the power cord from pulling into or away from the appliance
• Protects wiring from abrasion and sharp edges at the entry point
• Helps maintain a secure electrical connection to reduce intermittent power issues
• Commonly used where the cord passes through a rear or bottom access panel

• Disconnect power before inspecting or replacing the clamp to avoid shock or injury
• Install at the cord entry so the clamp captures the cord jacket; tighten fastener securely but do not over-torque
• Verify the cord is correctly routed and not pinched when reassembling panels
• If any wiring or the cord jacket is damaged, replace the cord before restoring power

This oven felt seal fits around the door perimeter to cushion the door and help reduce heat loss. It restores the intended door clearance and soft contact between the oven door and frame for safer, quieter operation. What it does:

• Cushions the oven door edge to prevent metal-on-metal contact and reduce rattling
• Helps limit heat and smoke from escaping the oven cavity when the door closes
• Restores proper door clearance to prevent scraping or uneven sealing
• Commonly replaced when felt is worn, compressed, torn, or missing

• One oven felt seal as shown

• High-level replacement; remove the oven door or open hinge per your service manual before replacing the seal
• Work with the oven powered off and fully cooled; disconnect power for safety
• Press the felt into the channel or adhesive area; ensure even fit around the full perimeter

This glow-bar oven igniter lights the gas burner. When energized, it heats and draws current through the safety valve so the bake or broil flame ignites reliably and the oven reaches the set temperature. What it does:

• Heats and ignites the oven's bake or broil burner
• Draws the correct current to open the gas safety valve
• Can address no-heat or no-ignition conditions
• Helps resolve very slow preheat or inconsistent oven temperatures
• Useful when the igniter glows but the burner never lights

• 1 glow-bar igniter

• Disconnect power and shut off gas supply before servicing
• Access from the oven cavity; remove racks, oven bottom, and flame spreader as needed
• Handle the igniter carefully—element is fragile; avoid touching the carbide/ceramic tip
• Secure connections and route wires away from flames and high-heat areas; test operation after reassembly

The Gas Range Knob Asm is an OEM component specifically designed for GE gas ranges. It consists of the sturdy knob handles used to turn gas burners on and off, or adjust flame levels. 

Causes of a bad gas range knob assembly include general wear and tear from frequent use. Exposure to cooking spillages and cleaning solutions may also negatively impact knob integrity if not properly cleaned.

Symptoms of a bad gas range knob assembly consist of:

• Difficulty turning knobs fully on or off  
• Knobs slipping out of set positions
• Knobs cracking, splitting, or signs of damage
• Inconsistent or uncertain burner control

This genuine GE replacement part is also compatible with some gas ranges from Hotpoint, Magic Chef, and select Kenmore models

The Orifice Holder is an OEM part for GE gas ranges. It secures the orifice spud in place, maintaining proper alignment of gas ports to burner tubes.  

The orifice holder prevents any movement or misalignment of gas passages, ensuring uninterrupted and precise fuel delivery. Correct positioning is critical for safe, efficient combustion and optimal heat levels.

Causes of a faulty holder can include wear and tear, damage from impact or heat exposure, or loose fasteners allowing misalignment over time.

Symptoms of a bad orifice holder include:

• Unstable or uneven burner flames  
• Inability to adjust oven temperature as needed
• Gas leaks near burner area
• Abnormal burner combustion noises

Replacing with this genuine OEM GE part restores secure orifice placement and optimized gas flow. It is also compatible with Hotpoint, KitchenAid, and select Kenmore gas range models.
 

The Electrode & Harness Assembly is an OEM part for GE gas ranges. It features ignition electrodes and a wiring harness that facilitates oven ignition. This assembly is responsible for sending high-voltage sparks to light the oven's pilot and main burners on command.

Symptoms of a bad electrode and harness assembly include:

• Oven pilot or burners failing to ignite properly
• Delayed ignition or repeated ignition attempts needed 
• Indicator lights signaling ignition errors

Causes can be cracks, wear, or damage to the insulated electrodes from repeated heating cycles. Over time this may lead to arcing or shorting of electrical connections.

Proper sparking ensures safe and reliable cooking functions. This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This surface burner valve regulates gas flow to a single cooktop burner for smooth, precise flame control. Replacing a worn valve can restore reliable ignition and adjustment on the affected burner while maintaining safe operation.

• Regulates and meters gas from the manifold to one surface burner
• Works with the control knob to provide simmer-to-high flame settings
• Common failure symptoms include: burner won't ignite, weak or unstable flame, gas odor near the knob/valve area, or a knob that is hard to turn
• Labeled "270" per GE specification to match the correct valve style/position used in select models

• Disconnect power and shut off the gas supply before servicing
• Access the manifold; note the valve's position and orientation before removal
• Reassemble and check all connections for leaks using an approved leak-detection solution
• If the burner still won't light, also inspect the burner orifice, igniter, and spark system

The Electrodes & Harness H.v is an OEM replacement part for GE gas ranges. It is responsible for igniting the gas to create a flame for cooking on your range's burners. The electrodes create a spark to ignite the gas, while the harness securely connects them to the ignition system.

Symptoms of a faulty electrodes and harness assembly include:

• Weak or inconsistent burner ignition
• No spark or ignition at all
• Difficulty in lighting the burners

A bad electrodes and harness assembly can occur due to regular wear and tear, exposure to heat, or damage from spills or cleaning agents. If you experience issues such as weak or intermittent sparks, burner ignition failure, or gas leakage, it may be time to replace the old or damaged electrodes and harness assembly with this genuine OEM part.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
 

The Convection Motor is an OEM part for GE gas ranges. It is the component responsible for circulating hot air around food inside the oven cavity during convection cooking cycles. 

Causes of a bad convection motor include failed windings, worn bearings, or damage from excess heat over time.

Symptoms of a bad convection motor include:

• Inability to select convection cooking functions 
• Lack of air movement inside the oven
• Slower than normal cooking times 
• Uneven baking or roasting results

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This electronic oven control board replaces a faulty control to restore oven functions and user interface. It manages bake/broil functions and the oven's display/input responses so the range operates correctly. What it does:

• Controls oven heating cycles (bake, broil, timers) through the appliance's user interface
• Manages display and keypad/touch inputs; can resolve unresponsive or blank controls
• Regulates oven temperature signals to heating elements or igniter circuits
• Helps stop erratic cycling or incorrect temperature behavior when the original board fails

• One oven control board

• Turn power to the appliance OFF at the breaker before starting any work
• Handle the control board carefully to avoid static damage; use a grounded strap if available
• Some disassembly of the control panel and removal of mounting screws/connectors is required

This glass door assembly replaces a damaged or broken oven/microwave door panel to restore a clear viewing window and proper door fit. It's a direct-fit exterior door component that helps keep heat contained and food visible during use. What it does:

• Replaces cracked, shattered, or fogged door glass to restore safe, clear visibility
• Re-establishes proper door sealing and alignment to support normal oven/microwave operation
• Prevents heat and steam from escaping through a damaged door surface
• Helps eliminate rattling or loose door panel issues when the glass or assembly is compromised

• One complete glass door assembly

• Disconnect power (unplug or shut off breaker) before starting any repair
• Handle glass carefully; use gloves and eye protection to avoid injury
• Installation may require removing trim and door fasteners; keep screws and hardware organized

The Glass Door Assembly is an OEM part compatible with GE gas ranges. It encloses the cooking cavity through a pane of transparent tempered glass allowing for visibility.

Causes of a bad Glass Door Assembly can include physical damage from impact or mishandling, wear and tear on the hinges or mounting mechanisms over time, or exposure to extreme temperatures or thermal shocks. A faulty door assembly can lead to issues with proper alignment, stability, or the ability to open and close smoothly.

Symptoms of a bad Glass Door Assembly include:

• Cracks or chips in the glass door panel
• Door not closing properly or creating gaps
• Difficulty opening or closing the oven door
• Hinges or mounting hardware feeling loose or detached

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore gas range models.