Jgbs66dekwww Parts

The Electrode and Harness Assembly is an OEM part for GE gas ranges. As a critical safety mechanism, it works to detect the presence of gas and spark the burners to life properly during each cooking cycle.

Causes of a faulty assembly can include cracks in electrode materials, failures in wiring insulation or connections, or sensor electrodes clogged with debris over time.  

Symptoms include: 

• Unreliable or intermittent ignition of one or more burners
• Burners that will not light at all using the Ignite function  
• Repeated safety shutoffs during use
• Error codes or sensor fault messages displayed

This GE replacement assembly ensures your appliance's gas detection and ignition system operate dependably to deliver safe, reliable stove-top cooking performance. It is also compatible with Hotpoint, RCA and select Kenmore models.

This gas control valve regulates the flow of gas to a surface burner on your cooktop or range. Replacing a worn valve restores smooth, accurate flame adjustment, reliable ignition, and positive shutoff for safe, consistent burner performance.

• Regulates gas to one surface burner for ON/OFF and flame size control as you turn the knob
• Enables proper ignition when opened; supports steady, even flame once lit
• Common failure symptoms: hard-to-turn or wobbly knob, uneven flame or poor adjustment
• May help if the burner won't light despite sparking, or if there's a gas odor at the valve stem

• Shut off the gas supply and disconnect power before servicing
• Remove the knob and access the valve from the control panel/cooktop area
• Transfer the igniter switch and any mounting hardware from the old valve to the new one if applicable
• After reassembly, check all connections with a leak-detection solution before use

The Oven Rack is an OEM replacement part for GE ranges. It provides an elevated surface for baking, roasting or broiling food inside the oven cavity. 

Causes of a bad rack can include warping or discoloration from exposure to high heat over time. Cracks or breakage may also occur due to mishandling or loading the rack with excess weight. 

Symptoms of a bad oven rack include:

• Food not baking or cooking evenly while on the rack    
• Difficulty sliding the rack in and out of the oven 
• Cracks, bends or broken welds in the rack frame

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This small cooktop bracket secures designated components beneath the cooktop surface, keeping them properly positioned and stable. Replace a damaged or missing bracket to restore alignment and reduce movement or rattling during use.

• Provides mounting support for specific under-top components, per model design
• Helps maintain proper alignment and stability of cooktop parts
• Replace when visibly bent, cracked, or corroded

• Disconnect power; for gas models, also shut off gas and allow the unit to cool
• Remove surface components as required (grates/caps/heads for gas; elements/panels for electric) to access under the top
• Lift or remove the cooktop as directed in your model's service information and secure the new bracket with existing hardware
• Reassemble, verify alignment, and for gas units check for leaks if any gas connections were disturbed

This left-side refrigerator door handle replaces a damaged or worn trim handle, restoring a secure grip and clean appearance. It matches original mounting points for a factory-fit look and function. What it does

• Provides the left-side grip for opening and closing the refrigerator door
• Restores proper alignment and prevents sharp edges from broken handles
• Helps eliminate rattling or loose-feel door operation caused by a damaged handle
• Matches the OEM finish for a consistent appearance

• One left-side white handle

• Designed to replace the matching left door handle; use existing fasteners unless new hardware is specified
• Tighten mounting screws to a snug fit; avoid over-torquing which can crack plastic
• Disconnect power and remove food from the door area if needed for safer access

This rangetop and bracket assembly replaces the damaged cooktop support that holds the rangetop and burner components in place, restoring a stable, level cook surface and proper burner alignment for safe cooking. What it does:

• Secures the rangetop to the range frame to prevent movement and wobbling during use
• Aligns and supports burners and control components for correct operation
• Helps maintain a consistent gap and seal between the cooktop and the range body
• Reduces rattling or uneven cooking caused by a loose or bent support

• Disconnect power and gas supply before starting any repair
• Use common hand tools; top may require lifting or removal for access
• Inspect surrounding parts and gaskets; replace any damaged fasteners

This genuine replacement screw secures panels, trim and small components on compatible appliances to restore proper fit and prevent rattling or gaps. Use it when a missing or damaged fastener causes loose or misaligned parts. What it does:

• Fastens panels, bezels, trim pieces and small assemblies to the appliance frame
• Restores secure fit to eliminate rattling, vibration noise or loose trim
• Replaces stripped, rusted or missing screws that prevent proper alignment

• Disconnect power to the appliance before servicing to avoid electrical hazard
• Use the correct screwdriver or driver bit to prevent stripping the head
• Tighten securely but avoid over-torquing; excessive force can strip threads or crack plastics
• Keep removed fasteners organized to ensure correct reassembly

This barrier door assembly replaces the oven/stove barrier used to block heat and fumes when the appliance is not in use, helping maintain proper airflow and appliance efficiency. It's a direct-fit replacement designed to restore the door's sealing and movement. What it does:

• Covers and seals the internal opening to prevent heat, smoke and cooking odors from escaping when closed.
• Helps maintain proper internal airflow and prevents drafts when the appliance is off.
• Restores smooth opening and closing action if the original barrier door is broken, warped, or cracked.
• Can reduce heat loss and improve the performance consistency of the oven cavity.

• Disconnect power to the appliance before starting any repair.
• Handle the door carefully to avoid damaging hinges or mounting tabs during removal and installation.
• Use common hand tools; follow OEM instructions for alignment and fastening to ensure proper fit and movement.

The White Handle and Endcap is an OEM part for GE ranges. It includes both the oven door handle as well as the decorative endcaps on either side. Together, these parts play an important aesthetic role in conveying an upscale look.

The handle and endcaps are responsible for providing an elegant oven door design. Made from durable white materials, they are better suited to resist scratches, stains, and discoloration compared to standard grades.

Causes of a bad handle and endcaps can include normal wear over time exposing them to grime, grease and potential stains in the kitchen. Accidental damage from cleaning chemicals is also possible.

Symptoms of needing to replace the handle and endcaps include:

• Dull or stained appearance that no longer looks white
• Cracks, chips or breaks in the material
• Loose fit of the endcaps that enables dirt/grease to accumulate behind

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

A replacement door hinge that restores proper door alignment and smooth pivoting so doors open and close correctly. Fits many standard appliance doors and helps reduce sagging, binding, and uneven gaps that let cold air escape. What it does

• Supports the door and maintains correct alignment for a proper seal and consistent closing.
• Provides the pivot point for smooth opening and closing motion.
• Common symptom fixes: corrects door sagging, binding, misalignment, and uneven gaps.
• Helps prevent premature wear on seals and reduces energy loss from poorly closing doors.

• 1 door hinge

• Unplug the appliance (and turn off water supply if applicable) before beginning any repair.
• Use appropriate hand tools; keep hardware and mounting screws organized for reassembly.
• Tighten hinge fasteners securely but avoid over-torquing; verify hinge alignment before final tightening.

A small mounting spacer that positions and secures components inside the appliance, helping maintain correct clearances and alignment for reliable operation. Replaces worn or missing spacers to reduce rubbing, vibration, or misalignment. What it does:

• Provides a fixed gap or support between parts to prevent contact and wear
• Keeps panels, brackets or assemblies properly aligned during operation
• Reduces vibration and noise caused by loose or missing spacing hardware
• Helps ensure correct airflow or clearance where specified by the manufacturer

• Install with the original fasteners and in the same orientation; do not force or deform the spacer
• Verify the mating surfaces are clean and free of debris before installing
• Disconnect power to the appliance before starting work and follow basic electrical safety
• Replace any other damaged mounting hardware to ensure a secure repair

The range Overlay (T09) is an OEM part for GE gas ranges. It is a cosmetic layer applied over control panels to enhance aesthetics and protect sensitive electronics underneath.

Causes of a bad overlay include normal fatigue from exposure plus unexpected handling incidents.

Symptoms of an aging overlay include:

• Scuffs, cracks or bubbles appearing on glossy surfaces  
• Fraying or peeling edges exposing underlying panels
• Discoloration detracting from the appliance's appearance
• Loss of ability to safeguard delicate components

This GE part also fits Hotpoint, RCA and select Kenmore models. 

This replacement screw fastens appliance components to restore secure fit and reduce vibration or panel movement. Simple, direct replacement for a missing or stripped fastener to help maintain proper assembly and operation. What it does:

• Secures panels, brackets or trim to keep parts aligned and prevent rattling
• Restores mounting where a lost or damaged screw causes loose or sagging components
• Helps maintain electrical and mechanical connections by keeping parts properly seated
• Small hardware solution for cosmetic and functional stability

• Use the correct sized screwdriver or driver bit to avoid stripping the head
• Inspect mating threads and replace if damaged; do not force a stripped screw
• Tighten until snug — avoid over-tightening which can crack plastic or strip threads
• If accessing areas near power or controls, disconnect appliance power first and follow all safety precautions

A replacement burner valve cover that protects and conceals the gas valve assembly on compatible ranges, helping keep valve components clear of spills and debris for more reliable burner operation. What it does:

• Covers and protects the gas valve area from food, moisture and spills.
• Helps prevent debris from interfering with valve knobs and internal valve parts.
• Can reduce intermittent ignition or burner performance issues caused by contamination.
• Restores the finished appearance around the valve for safer, cleaner operation.

• Always shut off the gas supply and unplug the appliance before servicing.
• Use basic hand tools; handle the valve area gently to avoid disturbing fittings or tubing.
• After installation, check for gas leaks with a soapy-water solution or a proper leak detector—do not use an open flame.

Size: 8 - 32 inch.

This is a replacement mounting screw used on compatible GE appliances to secure panels and components. It provides a corrosion-resistant, painted finish for a neat, lasting fit. What it does:

• Fastens trim, panels, or internal components where a 10-16 thread screw is required
• Painted/plated finish resists rust and blends with appliance surfaces
• Replaces worn, missing, or stripped screws to restore secure mounting
• Helps eliminate rattles or loose panels caused by missing fasteners

• One painted/plated 10-16 screw (2.15" length)

• Verify screw size and length match the original before installation
• Use appropriate driver to avoid stripping the head; do not overtighten
• Disconnect power or follow appliance safety guidelines if working near electrical components
• If the original screw threads are damaged, inspect mating part and replace as needed