Jgd8430 Parts

Right front

This heat-resistant fiberglass gasket is used in ranges and wall ovens to seal between glass and metal panels. Replacing a worn gasket restores a tight thermal barrier to keep heat contained and support consistent cooking performance.

• Provides a high-temperature seal between mating oven components
• Helps maintain proper cavity temperature and efficient operation
• Cushions glass/metal interfaces to reduce vibration and wear
• Common symptoms: fraying, flattening, brittleness, gaps, hot air felt at seams, or discoloration near the joint

• Disconnect power and allow the appliance to cool completely before servicing
• Access the gasket path per your model; remove panels or the door if required
• Remove the old gasket and clean channels/surfaces of debris and residue
• Install the new gasket in the same orientation without stretching; seat fully in any clips/retainers as designed

This cooktop is the appliance's main top surface. It restores a safe, level, easy-to-clean work area when the original top is damaged, helping your range or cooktop look and function as intended.

• Provides the upper surface that supports and aligns burners or heating elements
• Helps contain spills and protects internal components from moisture and debris
• Restores proper fit, finish, and stability when the original top is cracked or warped
• Typical replacement symptoms: visible cracks, chips, stains that won't clean, or broken mounting points

• Disconnect power at the breaker; shut off gas supply before servicing
• Handle carefully; edges and surfaces can be fragile—use gloves and a protective surface
• Transfer any components from the original top to the new part, noting positions and wire routing as applicable
• Test operation before returning to service

Right rear

Left front

This rotary switch replaces a worn or failed control selector, restoring reliable selection of cycles and settings on compatible Whirlpool appliances. It provides the same mounting and terminal layout as the original part. What it does:

• Selects and maintains the chosen cycle or setting when turned
• Transfers user inputs to the appliance control for cycle start and function selection
• Common symptom fix: selector won't turn, slips, or fails to engage settings
• Common symptom fix: appliance doesn't respond or changes settings unexpectedly

• Disconnect power to the appliance before beginning any repair
• Access typically requires removing the control panel or console; keep fasteners organized
• Match terminal layout to the old switch and transfer any knobs or shrouds as needed

This spark switch controls the gas burner ignition circuit so the range/cooktop ignites when a burner control is turned. It replaces a worn or non-responsive ignition switch to restore reliable spark activation. What it does

• Routes the ignition spark signal when a burner knob is turned to light the burner
• Commonly used when a burner fails to produce a spark or ignition is intermittent
• Works with the cooktop/range ignition system to initiate burner lighting safely
• Replaces a faulty switch that clicks but does not generate spark control

• Disconnect electrical power (and gas supply if applicable) before beginning work
• Handle terminals and wiring carefully; note wire locations or take a photo before disconnecting
• Use proper tools and avoid damaging surrounding components or seals

This replacement grease filter captures cooking grease and large airborne particles to help protect your hood or microwave exhaust system and reduce buildup on internal components. It restores proper airflow and helps maintain cleaner venting. What it does:

• Traps grease and large particulates from cooking vapors to protect internal fan and ductwork
• Helps reduce visible grease buildup and odors on the hood or microwave interior
• Can improve ventilation performance when a clogged or saturated filter is replaced
• Common symptom: heavy grease coating, reduced exhaust effectiveness, or visibly damaged/soiled filter

• Disconnect power to the appliance before servicing or accessing the filter area
• Follow your appliance owner's manual for filter access and removal instructions
• Typically installs by sliding or snapping into the filter slot behind the grille—verify fit before final installation
• If the filter is washable, clean according to manufacturer recommendations; replace if damaged or excessively clogged

Color: Black

Color: chrome. Measures about 2 inches in diameter.

This spark module controls the surface burner igniters on gas ranges, providing reliable spark sequencing so burners light quickly and evenly. Replaces a failed module to restore normal ignition behavior. What it does:

• Sends timed spark pulses to surface burner igniters so burners ignite when the control is turned on
• Stops ignition if the module fails, which can cause no spark or constant clicking without lighting
• Helps prevent unlit gas flow by only firing igniters when the range control calls for flame
• Works with oven/range ignition systems that use a separate spark module

• 1 spark module

• Disconnect electrical power and shut off the gas supply before starting any repair
• Handle the module and wiring harness carefully to avoid damage to connectors or wiring
• Match connector plugs and mounting locations to the old module for proper fit and secure mounting
• Test all burners for proper spark and ignition after installation

This spark switch engages the oven/range spark ignition for a right-side burner so the cooktop lights reliably when the control is turned. Replaces a worn or non-clicking spark switch to restore normal ignition. What it does:

• Routes the ignition spark to the right-side burner when the control knob is turned
• Helps the burner ignite quickly instead of producing continuous clicking or no spark
• Commonly replaced when a specific burner fails to light or clicks without igniting
• Works with the range's ignition system; not a burner cap, igniter, or control module

• Disconnect power and shut off gas supply before servicing the cooktop or range
• Handle with care; avoid bending terminals or damaging the switch housing
• Verify the correct side (right) and part number before installation

This large gray burner cap fits over a cooktop's burner head to protect burner ports and help shape the flame for even cooking. Replacing a damaged cap restores proper burner appearance and helps maintain consistent heat. What it does:

• Covers the burner head to protect ports from spills and debris
• Helps direct and stabilize the burner flame for more even heating
• Can reduce flame irregularities caused by warped or cracked caps
• Restores the cooktop's finished appearance when original cap is chipped or discolored

• One large gray burner cap

• Turn off the appliance and ensure all surfaces are cool before starting
• Remove old cap by lifting straight off; set new cap in place so it seats flat on the burner head
• Clean burner head and surrounding area of debris before installation

The Orifice Holder is an OEM part for Whirlpool gas cooktops. This part is responsible for securely holding the orifice, which controls the flow of gas to the burners. The gas cooktop orifice holder ensures proper gas flow and safe operation of the burners. It is designed to withstand high temperatures and regular use.

A bad orifice holder can occur due to wear and tear over time, exposure to heat, or accidental damage. If you notice symptoms such as gas leaks, weak flame, or inconsistent burner performance, it may be time to replace this part.

Symptoms of a bad orifice holder include:

• Gas leaks
• Weak flame
• Inconsistent burner flame

Restore your Whirlpool gas cooktop by replacing the worn or damaged orifice holder with this genuine OEM part.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.