Jgs07peh1ww Parts

Right hand side

This surface burner igniter is the spark electrode that lights the flame on your gas cooktop or range. Replacing a worn electrode restores reliable ignition at the affected burner for fast, consistent lighting.

• Generates a high-voltage spark at the burner to ignite gas
• Positions and insulates the tip for consistent flame lighting
• Common symptoms: burner won't ignite or no spark at that burner
• Other signs: needs a match to light, intermittent/erratic spark, cracked ceramic

• Disconnect power and shut off gas supply; allow appliance to cool
• Remove burner cap and head to access the electrode; note wire routing and mounting
• Transfer any bracket/clip from the original part if required and set proper gap/position near the burner port
• Restore power and gas, then test ignition at the repaired burner

Upper manifold panel that replaces a damaged or worn top manifold cover on the appliance backguard. Restores a secure mounting surface for manifold components while improving appearance and protecting internal parts from damage. What it does:

• Covers and protects the manifold area and related components from debris and damage.
• Provides the correct mounting surface and alignment for valves, controls, or hardware.
• Helps stop rattling or misalignment caused by bent, cracked, or missing panels.
• Common signs you need this part: visible damage, rust, loose or misaligned controls, or exposed manifold components.

• Disconnect power (and gas supply, if applicable) before starting any repairs.
• Wear gloves to avoid sharp edges and work on a stable surface.
• Retain and reuse existing screws, clips, or gaskets unless replacements are provided separately.

This control panel overlay with white indicator LED restores the front-facing trim and illuminated control lamp for a range or wall oven, improving visibility and appearance for button and display areas. What it does:

• Replaces a faded, cracked, or discolored control panel overlay so buttons and labels are easy to read
• Replaces the white control indicator LED used to illuminate or signal operating status
• Protects the underlying control board and switches from spills and wear
• Helps resolve issues where controls are hard to see or LED indicator is dim/nonfunctional

• Disconnect power to the appliance before beginning any service
• Access typically requires removing the console trim or control housing; keep screws and clips organized
• Handle the overlay carefully to avoid bending or scratching; avoid touching LED lens with bare fingers

This is a standard oven rack that supports cookware and pans inside the oven, restoring a stable cooking surface for baking, roasting, and broiling. What it does

• Provides a durable shelf for pots, pans and baking sheets
• Slides into the oven's rack supports to position cookware at the correct cooking height
• Replaces bent, warped, or missing racks that cause uneven cooking or tipping
• Compatible with typical slide-in and drop-in rack support systems

• One oven rack

• Install by sliding the rack into the oven's existing rack supports until fully seated
• Make sure the rack is oriented correctly (top/bottom) per your oven's rack guides
• Always let the oven cool before removing or installing the rack and use oven mitts when handling hot racks
• Clean with non-abrasive cleaners; avoid steel wool or harsh chemicals that can damage the finish

The Elbow 90° Asm is an OEM replacement part for GE gas ranges. It joins sections of burner piping at precise right angles, guiding fuel and air flow to burner heads.  

Causes of a bad elbow joint can be wear from years of vibrations, cracks developing from heat cycling, or accidental damage during maintenance.

Symptoms of a faulty elbow include: 

• Yellow burner flames or incomplete combustion
• Gas smell or leaks around pipes  
• Reduced heat levels from affected burners
• Premature deterioration of other components

This GE replacement is compatible with Hotpoint, RCA, and Kenmore models too.

This vent trim is a replacement trim piece that finishes the vent opening on compatible GE appliances, restoring a clean, finished appearance and helping direct airflow at the vent. It's a simple exterior part that refreshes the look and fit of the vent area. What it does:

• Covers and finishes the vent opening to restore a clean, factory appearance
• Secures the vent edge and helps maintain trim alignment
• Hides damage or wear to the original trim without altering ventilation function
• Commonly replaced when the original trim is dented, cracked, loose or missing

• Disconnect power to the appliance before beginning work and follow all safety precautions.
• Basic hand tools are typically required; handle trim carefully to avoid scratching the finish.
• Check orientation and fit against the vent opening before final fastening.
• Replace damaged or missing mounting hardware or clips with the correct OEM fasteners.

This control knob replaces a worn or broken stove/dryer control knob to restore reliable user control and selector operation. It fits directly onto the original shaft for simple, intuitive use. What it does:

• Provides a firm grip for turning the control shaft to select settings
• Restores accurate control when the original knob is cracked, stripped, or loose
• Prevents slipping so settings remain set during use
• Matches the original shape to maintain proper alignment and function

• One control knob as shown

• Pull the old knob straight off the control shaft; push the new knob onto the shaft until fully seated
• Disconnect power to the appliance before removing panels or working near electrical components

This inner oven door glass replaces cracked, fogged, or broken oven window glass to restore visibility and help the door seal properly. It's a direct-fit replacement designed to match the original door assembly. What it does:

• Provides a clear viewing window so you can monitor cooking without opening the door
• Restores a solid, undamaged surface to prevent drafts and heat loss through the door
• Replaces cracked or shattered glass that can be a safety hazard
• Helps maintain proper oven temperature by sealing the door assembly

• Handle with care; glass can be sharp—wear gloves and eye protection
• Disconnect power to the appliance before beginning any repair
• Follow the oven door disassembly steps in the manufacturer service manual; heavy or awkward pieces may need a second person

This replacement oven cavity insulation helps contain cooking heat and protects nearby components for more even baking and safer operation. It restores the oven's thermal barrier when old insulation is damaged or missing. What it does

• Provides thermal protection for the oven cavity and surrounding cabinet components
• Helps reduce heat loss for more consistent oven temperatures during use
• Limits heat transfer to adjacent parts and control areas to prevent overheating
• Commonly replaced when insulation is torn, burned, compressed, or missing

• One oven cavity insulation piece as shown

• Disconnect power to the appliance before starting any repair; unplug or switch off the circuit breaker
• Remove oven panels or racks as needed to access the insulation; follow the oven's service manual for panel removal
• Handle insulation with care; wear gloves and a dust mask if materials are fibrous or dusty
• Reinstall panels and restore power only after insulation and clearances are confirmed per the manufacturer's guidance

The Handle and End Cap Assembly is an OEM part for GE gas range models. It provides a grip for opening and positioning the oven door.

Symptoms of a faulty assembly include:  

• Loosened mounting of the handle introducing inaccuracies 
• End caps cracking or warping from prolonged heat exposures
• Degraded aesthetic appeal detracting from the cooking space

Failures stem from normal wear on mounting screws from frequent use, impact damages compromising structural support, and heat exposures deteriorating plastic end caps over time.

This OEM part is compatible with select Hotpoint and RCA gas range models as well.

This cover top is the replacement upper trim panel that restores the cooktop's finished appearance and protects underlying components from spills and debris. It fits the range surface and keeps the cooking area looking and working like new. What it does:

• Replaces a cracked, warped, or cosmetically damaged cooktop top/trim
• Shields burners and internal wiring from spills, crumbs and grease
• Helps maintain proper alignment of control and burner openings
• Restores a flush, finished surface to prevent food buildup in gaps

• One cover top panel

• Disconnect power to the range before beginning any service
• Remove burners or trim and any mounting screws to lift out the old cover
• Handle carefully to avoid scratching finished surfaces during installation

This drawer panel replaces a damaged or worn front trim on the appliance drawer to restore appearance and a proper seal. It provides the visible exterior surface and mounting interface for the drawer assembly. What it does:

• Replaces cracked, dented, or scratched drawer front to restore cosmetic appearance
• Restores proper alignment and contact where broken panels allowed the drawer to sit unevenly
• Helps maintain the intended fit and finish of the drawer opening

• Disconnect power to the appliance and remove any contents from the drawer before beginning work
• Handle the panel carefully to avoid scratching the new finish; use non-marring tools as needed
• Installation typically requires removing the drawer assembly and fastening the panel with the original screws/clips
• If mounting tabs or clips are broken, inspect adjacent parts and replace as needed for secure fit

This replacement range top is the cooktop surface that supports burners and cookware, restoring a flat, stable cooking surface and improving appearance on compatible GE ranges. It replaces damaged, warped, or heavily scratched tops. What it does:

• Provides a stable, level surface for burners and cookware to sit on
• Restores proper alignment and spacing for burner assemblies
• Helps prevent heat loss or uneven heating caused by warped tops
• Improves the appliance's appearance if the original top is dented, cracked, or heavily scratched

• Turn off power and gas supply and verify the appliance is fully disconnected before starting
• Remove burner grates and elements as required to access mounting fasteners; retain all screws for reassembly
• Handle the panel carefully to avoid bending or scratching during installation