Jgs990cds Parts

Size: 8abx3/8 - blk)

This pressure regulator controls and stabilizes incoming pressure so the appliance operates reliably and consistently. Replacing a faulty regulator restores proper pressure to the system and helps prevent performance issues. What it does:

• Regulates and holds incoming pressure within the appliance's required range for stable operation
• Ensures consistent flow to internal components that rely on correct pressure
• Can reduce symptoms like erratic or weak operation, inconsistent cycling, or pressure-related performance problems
• Helps prevent downstream component stress from overpressure

• One pressure regulator

• Turn off and disconnect electrical power and shut off the water or gas supply (as applicable) before starting
• Relieve system pressure and verify no flow before removing the old regulator
• Replace with the OEM regulator and tighten fittings to manufacturer torque specs; use thread sealant where specified by the manufacturer
• After installation, restore supply, check all connections for leaks, and test appliance operation.

This dual burner valve controls gas flow to two cooktop burners, restoring proper ignition and heat control for gas ranges. Replacing a faulty valve returns safe, adjustable flames and consistent cooking performance. What it does

• Regulates gas flow to two burners so flame size responds to the control knob
• Commonly replaced when burners won't light or won't hold a steady flame
• Helps stop uneven or no heat from affected cooktop burners
• Works as the direct gas-control component for the burner assembly

• Turn off the gas supply and unplug the appliance before starting work
• Tighten fittings to the manufacturer's torque specs and check all connections for leaks with a leak detector solution

This genuine replacement control knob restores secure, easy-to-use control of your appliance's settings. It provides a clear grip and pointer so selections are easy to read and change. What it does

• Replaces a cracked, stripped or missing control knob so the control shaft can be turned smoothly
• Restores a visible pointer for accurate temperature or cycle selection
• Helps prevent slipping or accidental changes by providing a firm grip
• Fits on a splined control shaft to engage the selector mechanism

• One control knob

• Remove the old knob by pulling it straight off the control shaft; push the replacement knob fully onto the shaft until seated
• If knob is tight, pull with a steady, even force or use a non-marring puller tool
• Disconnect power to the appliance before servicing if removal requires access behind the control panel
• Do not force onto an incompatible shaft; verify spline match before installation

Replacement water filter cartridge for compatible refrigerators. Helps restore clean-tasting water and clearer ice by reducing common taste, odor, and sediment issues. Easy-to-replace cartridge keeps your dispenser and ice maker working properly. What it does:

• Filters common taste, odor and sediment issues that cause off-tasting water or cloudy ice
• Helps prevent particulate build-up that can reduce dispenser and ice-maker performance
• Improves overall water clarity and mouthfeel for drinking and ice
• Common symptoms this part addresses: bad taste or odor, cloudy ice, or reduced water flow from the dispenser

• Replace per the refrigerator manufacturer's instructions; ensure the cartridge fully seats and seals
• After installation, run the water dispenser until flow is clear to flush air and any loose carbon fines
• Dispose of the old cartridge according to local regulations

This large fiberglass burner gasket seals the gap between the cooktop and burner to help keep heat, spills, and debris away from internal components. Fits where a durable, heat-resistant edge seal is needed. What it does:

• Provides a heat-resistant seal around a large cooktop burner to help protect internal components.
• Helps reduce burner wobble and keeps the burner assembly properly seated.
• Limits spills and food debris from falling under the cooktop, simplifying cleanup.
• Can reduce heat and steam exposure to adjacent parts that may cause premature wear.

• Disconnect power and allow the cooktop to cool fully before attempting service.
• Remove the burner and old gasket per the range manufacturer's instructions; clean mating surfaces before installing the new gasket.
• Press the gasket into place so it sits evenly around the burner opening; avoid stretching or twisting the gasket.

Color: Stainless.

This control knob replaces a worn or missing dial so you can reliably select settings on your appliance. Restore smooth, positive control and a like-new look when an old knob cracks, strips, wobbles, or falls off.

• Attaches to the control shaft so you can choose functions, temperatures, or speeds
• Provides a secure grip for accurate adjustments
• Typical symptoms include a cracked or missing knob, loose or wobbly feel, spinning without engaging, or difficulty turning to Off
• Direct replacement designed to fit the original control stem on compatible models

• Turn the appliance off and allow any hot surfaces to cool
• Pull the old knob straight off the control shaft; avoid prying against the console
• Align the new knob with the shaft and press straight on until fully seated
• Test operation to ensure the pointer aligns with Off and the control engages properly

This locknut is a small threaded retaining nut used to secure rotating and stationary appliance components, helping keep assemblies tight and stable during operation. It prevents parts from loosening and reduces vibration-related issues. What it does:

• Secures shafts, pulleys, or fittings to prevent axial movement
• Keeps assemblies fastened under normal vibration and load
• Helps stop wobble, grinding, or part separation caused by a loose connection
• Works with the matching threaded stud, shaft, or fitting for a proper hold

• Disconnect power and follow appliance safety procedures before servicing
• Use the matching thread size and engage threads fully; hand-start before tightening
• Tighten securely without overtightening; use the correct driver or socket for the nut
• Inspect mating threads and replace if damaged

This control panel is the front electronic interface that lets you select cycles and settings and communicates commands to the appliance for reliable operation. It restores user access when buttons, touchpads, or displays are unresponsive. What it does:

• Houses the control buttons/touchpad and display used to choose cycles and options
• Sends input signals to the appliance's control board so selected programs run correctly
• Commonly replaces panels with unresponsive buttons, intermittent controls, or damaged keypads
• Helps resolve issues where selections don't register or display feedback is missing

• Disconnect power before servicing to avoid shock or component damage
• Handle the panel and any attached ribbon cables carefully to prevent connector damage
• Follow your model's service manual for proper disassembly and reassembly steps

This band motor is the motor assembly that powers the appliance's moving band or drive link, restoring the mechanism that enables normal rotating or indexing motion. Use it to replace a worn or failed motor for smoother operation. What it does:

• Drives the appliance's band/drive link so the linked components can rotate or index as designed
• Restores motion when the original motor is noisy, weak, or no longer turns
• Helps stop skipping or intermittent movement caused by a failed motor
• Works as the direct replacement motor when the OEM part is specified

• One band motor assembly

• Disconnect power before starting any repair to avoid shock or injury
• Installation may require removing panels and fastening the motor to the band/drive; keep hardware for reassembly
• Verify alignment and secure belt or band tension per the appliance's service instructions