Jvm1660wh Parts

I took off the door handle with a phillips screw driver then pryed off the inner and outer plastic frames of the door with a small putty knife being careful not to let the glass fall out. I then installed the glass into the new frame and reinstalled them onto the door. Very simple fix! Read more

Follow the trio ubshooting flow chart inside of the microwave panel - and read articles on this website. Turned out to be a thermostat that had popped and gone bad. Replace the thermostat and it is good to go. Read more

Ordered the Grille, came with everything I needed and was replaced in about ten minutes. Read more

I bought a used Microwave without a plate to mount the microwave. So i couldn't mount the microwave. Wife not happy:(. . So within 3 day from ordering the mounting plate from Appliance Parts Pros. com the microwave was up and running. Wife is now happy:). Fast Delivery. Read more

I have one of those combo units with the microwave on top and the oven on the bottom. The thermometer switch located on the upper right side mounted on top of the magnetron read open on a continuity test. Replaced the thermal fuse. Everything works fine now. Note: The thermal switch on the left side read closed, the fan switch on the lower right side read open. I just watched some youtube videos on what and how to test the components. The 20A fuse was good. So I tested the thermal... Read more

I had to remove the microwave from the range and then remove the cover from the microwave to determine the exact problem. After a visual inspection then discharging the high voltage capacitor, I used a meter to test the high voltage diode and fuses. After using the meter to ohm out the magnetron, I removed it from the unit, and seeing that the hole in the end of the magnetron's tube was enlarged and burnt, as if it was arcing, I assumed it was the bad part. I ordered the parts from Appliance... Read more