Jvm3160dfww Parts

This fuse assembly is a safety component that opens the circuit when an overcurrent or short occurs, protecting the appliance's wiring and electronics. Replacing a blown fuse assembly can restore power once the underlying fault has been corrected. What it does:

• Provides overcurrent protection by interrupting power during a fault
• Helps with symptoms such as a completely dead unit, dark display/control panel, stopping mid-cycle, or repeatedly blown fuses
• Protects internal wiring and control components from damage
• Designed to fail safely to prevent further electrical issues

• 1 fuse assembly

• Disconnect power to the appliance before servicing; if hardwired, switch off the circuit breaker
• Replace only with the correct fuse type/rating specified for your model
• Identify and correct the root cause of the blown fuse (e.g., shorted wiring or component) to avoid repeat failure

A replacement oven lamp cover that protects and diffuses the interior light so you can see food clearly while preventing direct contact with the bulb. Fits behind the oven lamp housing to restore safe, even illumination. What it does:

• Protects the oven light bulb from food splatter, heat, and accidental contact
• Diffuses and softens the lamp output for clearer, less-glare interior visibility
• Replaces cracked, cloudy, or missing lens that can reduce oven illumination
• Helps maintain proper lamp alignment and housing coverage during use

• One lamp cover

• Disconnect power to the appliance before servicing to avoid electrical shock
• Allow the oven and bulb to cool completely before removing the old cover
• Access may require removing oven racks and/or a few screws or clips from the lamp housing
• Handle the cover carefully—glass/plastic lenses can chip or crack; tighten fasteners snugly but do not overtighten

The Black Door is an OEM part for GE microwaves. As the main barrier between the microwave cavity and exterior, the door is subject to constant exposure and wear. 

Causes for a bad door can include dents, scratches or other surface damage accumulated over time and use. The door seal may deteriorate, failing to provide an adequate barrier between the radiation and the exterior. Hinges or latches may become loose or fail to function properly.

Symptoms of a bad door include:

• Inability to securely close or latch the door 
• Leaks of light or steam from the door seams
• Faulty seals that no longer prevent radiation escape
• Loose or improperly functioning hinges
• Physical damage impairing aesthetic appearance

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models. 

The Microwave Power Cord Assembly is an OEM part for GE ranges featuring built-in microwave units. 

Causes of failure can be splitting insulation from flexing at plug points, bent pins compromising contacts, or degradation over extended use.

Symptoms of a faulty power cord include: 

• Intermittent or failing microwave operation
• Loose connection points presenting shock hazards
• Exposed internal wiring posing fire risks

This OEM part is also compatible with Hotpoint and RCA built-in microwave range models.

This control panel assembly replaces the front console that houses the user controls and display for the range/oven. Restores responsive buttons and clear status readouts so you can select oven modes, set temperatures and timers. What it does:

• Replaces the main console that holds touchpads/buttons and the display for oven/range functions
• Restores proper input response when setting bake, broil, timers and clock
• Helps eliminate unresponsive keys, missing display segments or intermittent control behavior
• Works with the appliance's existing wiring harness and mounting points

• Disconnect power at the breaker before starting; electric shock hazard.
• Handle the display and ribbon/connectors carefully to avoid damage; use proper tools.
• Reconnect wiring exactly as removed; secure mounting screws to prevent vibration.

This replacement lamp cover protects and diffuses the interior appliance light, restoring safe, even illumination so you can see inside the cavity. Designed to fit the factory light opening and keep the bulb shielded from food and debris. What it does:

• Shields the interior light bulb from spills, splatters and physical contact
• Diffuses light for more even illumination across the cavity
• Prevents direct exposure to the bulb, reducing risk of breakage
• Helps maintain proper airflow around the lamp housing for safe operation

• One lamp cover

• Disconnect power to the appliance and allow the bulb to cool before servicing
• Remove existing cover carefully; handle replacement with care to avoid chipping or cracking
• Installation typically requires removing a small screw or releasing retaining clips—keep fasteners for reassembly
• If the bulb is damaged, replace the bulb when installing the new cover

This electronic control assembly operates the washer's cycle selection and timing, restoring proper control over wash functions and displays. It replaces a failed or unresponsive main control to help the machine run selected cycles reliably. What it does:

• Replaces the washer's main control board that manages cycle timing, motor and valve commands.
• Restores user interface responsiveness when cycles won't start or controls are unresponsive.
• Addresses symptoms like no power to cycles, erratic or stopped cycles, or no water fill when control is faulty.
• Works with existing harnesses and connectors that match the original part.

• One control assembly

• Disconnect power to the appliance before service to avoid shock or injury.
• Handle the board carefully; avoid touching components or connectors to prevent damage from static.
• Verify connector locations and harness orientation before removal; take photos for reference.

This bisque control panel replaces the front console on compatible GE ranges and ovens, restoring the look and user interface so oven controls are visible and usable. It's a direct cosmetic and functional overlay for the console area. What it does:

• Houses the oven's touchpads/buttons and provides the finished front surface for the control area
• Restores legible labels and button operation when the original panel is cracked, faded, or cosmetically damaged
• Helps prevent dirt and moisture from reaching internal console electronics when intact
• Compatible with original mounting points and keypad/button layout for easy alignment

• One bisque control panel

• Always disconnect power at the circuit breaker before starting any repair
• Minor disassembly of the console/upper fascia is usually required; keep screws and small parts organized
• Reuse existing hardware and overlays unless damaged; for panel removal steps
• If internal electronics are damaged or buttons still do not respond after replacement, further diagnosis may be needed

A complete fan assembly that circulates air inside the appliance to help cool components and move heated or cooled air where needed. Replaces a worn or noisy fan to restore proper airflow and reduce overheating risk. What it does

• Circulates air for cooling electronics, components or internal compartments
• Helps maintain even temperature distribution during operation
• Stops excessive vibration or noise when the motor or blade is worn
• Prevents airflow-related faults that can trigger appliance error codes

• Disconnect power before servicing to avoid shock or injury
• Remove access panels and mounting hardware to replace the assembly; retain fasteners for reinstallation