Jvm316od4cc Parts

This outer case is the main exterior cabinet that protects internal components and provides the appliance's finished appearance. It restores structural support and a clean exterior when the original cabinet is damaged or removed. What it does:

• Replaces a dented, cracked, corroded, or missing outer cabinet to restore protection and appearance
• Shields internal parts from dust, moisture, and physical contact
• Provides mounting surfaces and alignment for internal panels and controls
• Helps maintain correct airflow paths and component spacing inside the appliance
• Visible cosmetic part that affects the unit's finished look

• Disconnect power and water (if applicable) before starting
• Handle carefully to avoid sharp edges and to prevent cosmetic scratches during installation
• May require removal of trim, panels, and fasteners; retain original screws and clips unless replacements are provided

The Microwave Case is an OEM exterior shell compatible with GE built-in microwaves. It fully encloses the unit, protecting internal components from damage.

Causes of a bad case can include dents, cracks or peeling of the protective surface over time. Exposure to heat or moisture may degrade certain materials. 

Symptoms of a bad case include:

• Physical deformities that compromise the outer appearance
• Gaps or holes that allow access to internal electronics
• Loose or detached door and control panel trim 

This case is also compatible with select Hotpoint and RCA microwaves.

This rivet assembly is a direct-replacement fastening piece used to secure appliance panels and components, restoring a stable, rattle-free fit and preventing movement caused by worn or broken rivets. What it does:

• Secures panels, brackets, or component mounts to restore proper alignment and support
• Stops rattling, vibration, or loose hardware caused by damaged or missing rivets
• Provides a durable mechanical fastener where original rivets have sheared or loosened
• Helps maintain safe operation by keeping parts properly retained

• Disconnect power (and gas/water if applicable) before attempting any repairs
• Removal may require drilling out the old rivet; installation typically needs a rivet gun or equivalent tool
• Keep hardware orientation the same as the original; replace any damaged surrounding parts

This white refrigerator door assembly replaces a damaged or worn exterior door to restore proper closure and appliance appearance. It provides a factory-style fit and finish for models that use this specific door assembly. What it does:

• Replaces a cracked, dented, or cosmetically damaged refrigerator door to improve appearance
• Restores proper door closure and helps maintain internal temperature by allowing the seal to seat correctly
• Replaces a missing or bent door shell that interferes with normal operation
• Matches factory finish and mounting points for a direct-fit replacement when the OEM door is required

• Disconnect power to the appliance and remove food from the door before starting
• Installation may require removal of trim, hinges, and interior shelves; keep fasteners for reuse
• Use appropriate hand tools and follow the manufacturer's service instructions for alignment and sealing
• If electrical components or wiring are present, test operation before returning the appliance to service

This replacement plate restores the original support and fit for the appliance component it secures, helping stop rattles and misalignment. Use this OEM-design plate when the original is bent, cracked, or missing. What it does:

• Provides a stable mounting surface to secure adjacent parts and assemblies
• Prevents movement that can cause noise, misalignment, or uneven operation
• Restores correct spacing and alignment for panels or elements
• Helps maintain safe, consistent appliance performance when damaged

• One plate

• Disconnect power (unplug or switch off breaker) before starting any repair
• Handle edges carefully; replacement metal parts can have sharp edges
• Verify orientation and alignment before tightening fasteners; use only the hardware specified by the manufacturer

This cover choke is a small protective cap used on compatible ranges to cover and protect the choke assembly. It prevents debris and spills from reaching the choke area so burners operate more reliably. What it does:

• Protects the choke assembly from food, grease and spills that can interfere with burner performance
• Helps maintain proper airflow around the choke for consistent ignition and flame control
• Reduces the risk of clogging or contamination that can cause weak or uneven burners
• Simple replacement can resolve symptoms like noisy or erratic burner operation when caused by debris

• One cover choke

• Turn off power and gas supply to the appliance before servicing; follow manufacturer's safety guidance
• Remove grates and burner components as needed to access the choke area; handle small parts carefully
• Inspect adjacent gaskets and burner parts for damage and clean surrounding areas before installing the new cover

A replacement oven lamp cover that protects and diffuses the interior light so you can see food clearly while preventing direct contact with the bulb. Fits behind the oven lamp housing to restore safe, even illumination. What it does:

• Protects the oven light bulb from food splatter, heat, and accidental contact
• Diffuses and softens the lamp output for clearer, less-glare interior visibility
• Replaces cracked, cloudy, or missing lens that can reduce oven illumination
• Helps maintain proper lamp alignment and housing coverage during use

• One lamp cover

• Disconnect power to the appliance before servicing to avoid electrical shock
• Allow the oven and bulb to cool completely before removing the old cover
• Access may require removing oven racks and/or a few screws or clips from the lamp housing
• Handle the cover carefully—glass/plastic lenses can chip or crack; tighten fasteners snugly but do not overtighten

This capacitor helps the appliance motor start and run smoothly, restoring proper motor operation and reducing startup strain. Use this exact replacement to address motor performance issues. What it does:

• Provides the electrical phase shift needed for the motor to start and run
• Restores normal motor startup and running behavior
• Can resolve humming, slow or non-starting motors, and intermittent motor stalls
• Works with the motor's control circuitry to stabilize performance under load

• Always disconnect power to the appliance before starting work
• Discharge the capacitor before handling to avoid electrical shock
• Match terminals and wiring exactly to the original; secure connections firmly

This outer oven door panel restores the exterior appearance and protective surface of your oven's front. It replaces a scratched, dented, or faded outer door and brings back the original slate finish. What it does

• Replaces damaged or cosmetically worn outer door surface to improve appliance appearance
• Provides the external protective panel that covers internal door components
• Helps the door sit correctly with existing inner panels and hardware when installed properly
• Appropriate for restoring a uniform slate finish after impact or wear

• Disconnect power to the oven before beginning any repair to avoid shock or injury
• Door removal typically requires supporting the door, removing hinge screws, and separating inner panels—follow OEM instructions
• Handle the panel carefully by the edges to avoid scratches or bending

The Microwave Power Cord Assembly is an OEM part for GE ranges featuring built-in microwave units. 

Causes of failure can be splitting insulation from flexing at plug points, bent pins compromising contacts, or degradation over extended use.

Symptoms of a faulty power cord include: 

• Intermittent or failing microwave operation
• Loose connection points presenting shock hazards
• Exposed internal wiring posing fire risks

This OEM part is also compatible with Hotpoint and RCA built-in microwave range models.

This wire harness replaces a damaged or worn internal wiring assembly to restore secure electrical connections between controls and components. It helps prevent intermittent operation and reduces risk of shorts caused by frayed or broken wires. What it does

• Routes and connects power and signal circuits between control, switches, and components
• Replaces cracked, burnt, or broken wires that cause intermittent or no operation
• Helps stop electrical arcing, visible sparks, or blown fuses related to harness faults
• Restores reliable connector fit where pins or terminals have loosened or corroded

• One complete wire harness as pictured

• Always disconnect power (unplug or turn off breaker) before inspecting or replacing wiring
• Compare the new harness to the old one to ensure connector types and lengths before installing
• Route harness away from moving parts and heat sources; secure with existing clips or ties
• If terminals are damaged or connectors don't seat fully, replace connectors.

This control panel assembly replaces the front console that houses the user controls and display for the range/oven. Restores responsive buttons and clear status readouts so you can select oven modes, set temperatures and timers. What it does:

• Replaces the main console that holds touchpads/buttons and the display for oven/range functions
• Restores proper input response when setting bake, broil, timers and clock
• Helps eliminate unresponsive keys, missing display segments or intermittent control behavior
• Works with the appliance's existing wiring harness and mounting points

• Disconnect power at the breaker before starting; electric shock hazard.
• Handle the display and ribbon/connectors carefully to avoid damage; use proper tools.
• Reconnect wiring exactly as removed; secure mounting screws to prevent vibration.

This stainless steel door assembly replaces a damaged or worn outer door to restore appearance and proper closing on compatible GE appliances. It provides the finished exterior panel and mounting points needed for a like-for-like replacement. What it does:

• Replaces a dented, bent, cracked or cosmetically damaged outer door panel
• Restores proper door fit and alignment to help the appliance close securely
• Replaces a door with scratched or corroded stainless finish for improved appearance
• Works with existing hinges, latch components, and trim when they are undamaged

• Disconnect power to the appliance before starting any door repair or removal
• Handle edges and any glass elements carefully to avoid cuts or breakage
• Some trimming or adjustment of hinges/fasteners may be required for proper alignment

This slate control panel replaces a damaged or worn front panel on compatible GE ranges to restore the appliance's appearance and provide a clean surface for the oven controls and display. Designed to match slate finishes. What it does

• Serves as the front fascia for the range's control area and display, protecting underlying electronics and components.
• Provides a finished mounting surface for touchpads, buttons, and indicator windows.
• Addresses cosmetic issues like scratches, chips or faded finish to improve the appliance's look.
• Useful when the original panel is cracked, bent, or otherwise preventing proper sealing of the control area.

• One slate control panel

• Disconnect power to the appliance before starting any service to avoid electrical shock.
• Basic hand tools typically required; some models may require removal of the cooktop or rear access panel.
• Handle edges and any glass components with care to avoid cuts or breakage.