Kbudt4265e Parts

This replacement screw secures panels, trim pieces and small assemblies so covers and components stay aligned and rattle-free. It's a simple, direct fastening part used when an original screw is missing or damaged. What it does:

• Fastens panels, trim, control housings and other small components to the appliance chassis
• Replaces missing, worn or stripped screws that cause loose panels or rattling noises
• Restores correct alignment of covers and trims after service or disassembly
• Provides a direct, hardware-level repair instead of temporary fixes

• Disconnect power (and gas, where applicable) and ensure the appliance is cool before starting.
• Use the correct screwdriver bit and turn until snug; do not overtighten to avoid stripping threads or damaging parts.
• Keep removed hardware for reference; replace like-for-like if threads or inserts are damaged.
• Wear eye protection and gloves when working on appliances.

This replacement fan motor circulates air inside the appliance to maintain proper airflow and temperature. Use it to restore normal cooling and ventilation when the original motor fails or runs intermittently. What it does:

• Drives the appliance fan blade to move air for cooling, defrosting, or venting
• Commonly replaces motors that hum, run slowly, or won't start
• Helps stop uneven temperatures, inadequate cooling, or frost buildup caused by poor airflow
• May reduce abnormal vibration or noise when the motor has worn bearings

• Disconnect power to the appliance before starting any repair
• Handle the motor and wiring carefully; match connectors exactly to avoid damage
• This part may require removing panels, brackets, or the fan blade for access—keep fasteners organized

This Support (mounting bracket) secures internal components and stabilizes the appliance's assembly to help prevent sagging, misalignment and excess vibration. It's a small replacement that restores proper fit and reduces rattling. What it does:

• Provides a stable mounting point for panels or internal assemblies
• Keeps components aligned to prevent binding or wear
• Reduces noise caused by loose or sagging parts
• Helps stop intermittent contact or rubbing that can cause rattles

• Disconnect power (and water, if applicable) before servicing
• Access may require removing outer panels or trim; keep track of fasteners
• Support the assembly while replacing the bracket to avoid strain

This water filter housing assembly holds and secures the refrigerator's inline water filter and connects the filter to the fridge water lines, keeping your ice maker and dispenser water pathway sealed and routed properly. Replaces a worn or cracked housing to stop leaks and restore proper filter seating. What it does

• Secures the water filter cartridge and forms a sealed connection with refrigerator water lines
• Directs filtered water to the dispenser and ice maker; prevents bypass and leakage
• Commonly replaced when cracks, leaks, or poor filter seating cause water dripping or reduced dispenser performance
• Compatible with systems that use a cartridge-style inline/filter-canister housing design

• Turn off water supply and disconnect power before servicing to avoid leaks and electrical risk
• Inspect and replace any O-rings or gaskets if worn; use compatible seals to prevent leaks

This roller set replaces worn or broken rack wheels so your dishwasher rack slides smoothly and stays aligned. It restores quiet, stable rack movement and prevents the rack from catching or tipping when pulled. What it does:

• Replaces damaged or missing rack wheels to restore smooth sliding action
• Helps keep the rack aligned and prevents it from sticking or catching
• Reduces noise and wobble when opening or closing the rack
• Works with the rack's axle to support proper rolling motion

• Disconnect power and turn off water supply before starting repairs
• Remove the dish rack to access and replace the rollers; keep track of axle and clips
• Use basic hand tools; inspect the axle and track for debris or damage before reassembly

The Auger Motor is an OEM part for Bosch refrigerators.The auger motor rotates the auger shaft to dispense ice through the door.

Causes of a bad auger motor can include normal wear and tear from continuous use, damage due to freezing or thawing cycles, or failure of internal motor components.

Symptoms of a bad auger motor include:

• Loud buzzing or grinding noises
• Inability to dispense ice from the ice bucket

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

This fan blade replaces a damaged or worn blower blade to restore proper airflow and reduce noise. It helps the appliance circulate air efficiently so cooling and ventilation perform as intended. What it does:

• Moves air across the evaporator/heatsink or within the appliance cabinet to support cooling and ventilation
• Restores full airflow when the original blade is cracked, warped, or missing
• Helps reduce rubbing, vibration, and unusual fan noise caused by damaged blades
• Prevents motor strain that can occur when an imbalanced or broken blade is used

• Disconnect power to the appliance before beginning any repair
• Handle the blade carefully to avoid bending the impeller fins
• Inspect the motor shaft, set screw, and mounting hardware; replace any damaged fasteners

This bi-metal defrost thermostat controls the refrigerator's defrost cycle by opening or closing the circuit to the defrost heater, helping remove frost buildup and protect the heater from overheating. What it does:

• Opens the defrost heater circuit when the evaporator reaches the correct temperature to stop heating
• Closes the circuit at colder temperatures so the heater can run during a defrost cycle
• Helps prevent excessive frost buildup that can reduce cooling performance
• Commonly replaced when the defrost cycle fails to start or will not end properly

• One defrost bi-metal thermostat

• Disconnect power to the appliance before servicing to avoid electrical shock
• Located near the evaporator/heater assembly; access may require removing panels or the evaporator cover
• Handle carefully to avoid bending terminals or damaging the sensor element
• Test for continuity before replacement

A replacement door switch that senses when the appliance door is closed and allows the unit to operate. Restores normal safety interlock function so the appliance only runs with the door properly shut. What it does

• Detects door closure and completes the circuit to allow the appliance to start or run.
• Prevents operation when the door is open, helping keep users safe.
• Commonly linked to symptoms such as the appliance not starting, stopping mid-cycle, or controls not responding when the door is shut.
• Works as a direct electrical interface for the door latch or catch assembly.

• Disconnect power (unplug or shut off circuit breaker) before accessing the switch.
• Remove required access panels or the door inner panel; handle sharp edges and glass with care.
• Confirm wiring and connector orientation match the replacement; secure all fasteners and reassemble panels fully.