Kbudt4265e Parts

A replacement door switch that senses when the appliance door is closed and allows the unit to operate. Restores normal safety interlock function so the appliance only runs with the door properly shut. What it does

• Detects door closure and completes the circuit to allow the appliance to start or run.
• Prevents operation when the door is open, helping keep users safe.
• Commonly linked to symptoms such as the appliance not starting, stopping mid-cycle, or controls not responding when the door is shut.
• Works as a direct electrical interface for the door latch or catch assembly.

• Disconnect power (unplug or shut off circuit breaker) before accessing the switch.
• Remove required access panels or the door inner panel; handle sharp edges and glass with care.
• Confirm wiring and connector orientation match the replacement; secure all fasteners and reassemble panels fully.

The Fan Motor is an OEM replacement part for Bosch refrigerators. It circulates cold air inside the insulated liner maintaining precise temperatures. Unhindered airflow locks in freshness. 

Causes of a bad fan motor involve enduring years of constant rotation which stresses motor windings and bearing surfaces beyond rated lifetimes. Vibration and ambient heat accelerate breakdowns.

Symptoms of a bad fan motor include:  

• Loss of desired cooling capacity as air fails to circulate    
• Temperature fluctuations that compromise perishables  
• Audible grinding or rattling from within the fridge's interior
• Failed fan blades detaching pose potential fridge hazards

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

This top door spacer positions and supports the upper edge of the appliance door to maintain correct clearance and alignment for smooth opening and closing. It helps keep the door trim and glass properly spaced for reliable operation. What it does:

• Keeps the top edge of the door correctly spaced from the cabinet to prevent rubbing or binding
• Helps maintain door alignment for an even seal and consistent closing
• Reduces vibration-related noise by stabilizing the door assembly
• Protects trim and glass from contact damage at the top edge
• Useful when replacing worn or missing door support components

• One top door spacer

• Disconnect power to the appliance before starting any repair
• Remove the door or door trim panels per the manufacturer's instructions to access the spacer
• Handle door glass and trim carefully; use appropriate tools and support to avoid damage

Front left hand side

A roll pin (spring pin) that secures rotating or sliding components by fitting into matched holes to hold shafts, levers, or brackets in place. Replaces a worn or damaged pin to restore proper mechanical engagement. What it does:

• Holds shafts, levers or hinges in position by expanding into drilled holes for a snug, vibration-resistant fit
• Keeps pulleys, rollers, or linkages from moving out of alignment or sliding off their shafts
• Common symptom: loose or wobbling pulley, lever, or shaft where the retaining pin is worn or broken
• Common symptom: noisy or intermittent operation caused by a pin that no longer secures moving parts

• Inspect mating holes and shaft for wear; replace pin with correct size to ensure secure fit
• Use appropriate pliers or a pin punch and hammer to drive the pin in or out; support the assembly to avoid damage
• Wear eye protection when installing or removing roll pins—pins can snap or fly out under force
• If pin is difficult to remove or install, consider using penetrating oil or heating only per OEM guidance

This wire harness is the factory-style electrical assembly that routes power and signals between components to restore reliable operation. It replaces damaged or worn wiring and connector assemblies responsible for intermittent or lost power. What it does:

• Carries electrical power and control signals between appliance components
• Replaces frayed, burnt, or broken wiring that can cause intermittent operation
• Resolves symptoms such as the appliance failing to start, erratic control behavior, or intermittent power to components
• Ensures connectors are properly routed and joined to prevent shorts and unreliable connections

• Disconnect power (unplug appliance or switch off circuit breaker) before you begin
• Handle connectors gently; match connector shapes and pin counts before seating
• Route the harness following factory clips and channels to avoid heat or pinch points

This replacement water fill tube routes water to the appliance's dispenser/ice system so you get proper fill and reduced leaks. It restores reliable water delivery when the original tube is cracked or clogged. What it does:

• Directs water from the supply to the dispenser or ice/water mechanism
• Prevents leaks when intact and properly secured
• Helps ensure consistent water flow for ice makers and dispensers
• Worn or damaged tubes can cause pooling, low water delivery, or intermittent filling

• One replacement water fill tube

• Turn off the appliance power and water supply before starting work
• Inspect fittings and seals; replace clamps or gaskets if worn
• Slide tube into place and secure with the original or new clamps for a leak-free connection

This replacement receiver lens covers and protects the appliance's infrared/receiver area and indicator light while allowing signals and status lights to show through clearly. It restores proper protection and visibility for the sensor/indicator assembly. What it does:

• Protects the IR/receiver and indicator area from dust, spills, and impact
• Allows remote/IR signals and indicator lights to pass through without obstruction
• Replaces cracked, discolored or missing lens that can hide status lights or reduce signal clarity
• Helps maintain original appearance of the control/console area

• Disconnect power to the appliance before beginning any repair.
• Remove the control console or front panel per the service manual to access the lens.
• Handle the lens gently to avoid scratching; seat it into the bezel until it snaps or rests securely.

This replacement egg container snaps into a refrigerator door shelf to hold and protect eggs while keeping them organized and easy to access. It restores the original storage location and helps prevent eggs from shifting or cracking during normal use. What it does:

• Holds and secures eggs in the fridge door to reduce movement and breakage
• Replaces damaged, cracked, or missing egg storage trays
• Helps keep eggs organized and easy to grab when loading or unloading the door
• Fits into the door shelf receptacle and engages with factory mounting tabs

• Remove food and any items from the door shelf before installing
• Align container tabs with the door shelf slots and press until it snaps into place
• Do not force; if resistance is felt, recheck alignment to avoid damage
• Follow the refrigerator owner's manual for model-specific removal and installation guidance