Kdfe104 Hbl0 Parts

Number-8, 18-thread screw used to secure panels, brackets and small assemblies in Whirlpool appliances. Replacing a missing or damaged screw restores secure mounting and helps stop rattling or loose parts. What it does:

• Fastens trim, panels, brackets or small appliance components that use a #8-18 threaded fastener
• Restores secure mounting when a screw is lost, stripped or damaged
• Helps eliminate vibration-related noise from loose parts
• Simple replacement part for basic fastening needs

• Disconnect power to the appliance before servicing and work on a cool, stable surface
• Use the correct screwdriver or driver bit to avoid cam-out or stripped heads
• Thread in straight and tighten until snug; do not over-torque to avoid stripping threads or damaging components
• Replace with the identical screw type and size for proper fit and function

Color: Biscuit. Size: 13 oz. can. Enamel spray paint.

This jumper is an OEM-style electrical wire connector used to bridge terminals in a Whirlpool appliance to restore circuit continuity and proper component operation. It's a simple replacement part that helps return power or signal paths when the original jumper is damaged. What it does

• Provides a secure electrical connection between two terminals to complete a circuit.
• Restores power or signal routing to components that lose function due to a broken or corroded jumper.
• Common symptom: component or control doesn't receive power or the appliance won't complete a specific cycle.
• Works with control boards and wiring harness assemblies where a factory jumper is used.

• One jumper electrical connector.

• Disconnect power (unplug appliance or shut off breaker) before service to avoid shock or damage.
• Use insulated tools as needed and make secure, tight terminal connections to prevent arcing.

The Cntrl-Elec is an OEM component specifically designed for Whirlpool brand dishwashers. This control board module regulates electrical functions and sends signals to components during cleaning cycles.

Causes of a bad control board can include moisture damage, physical impact over time, or normal component degradation.

Symptoms of a bad control board include:  

• Dishwasher not starting or functioning as expected
• Lights or timers not responding properly
• Strange sounds or smells coming from internal components  
• Cycles not completing or stopping prematurely

This Whirlpool replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, and some Kenmore models.

This stainless steel fine filter traps food particles in the dishwasher sump to help keep wash water cleaner and improve cleaning performance. Durable, corrosion-resistant construction fits the factory filter location. What it does:

• Captures small food debris to prevent recirculation and redepositing on dishes
• Helps maintain proper water flow through the wash system
• Reduces the risk of clogs in the dishwasher pump and spray arms
• Supports consistent cleaning results when the filter is clean and installed correctly

• One stainless steel fine filter

• Disconnect power to the appliance before servicing
• Remove the lower rack and locate the sump area to access the filter
• Clean surrounding area of heavy debris before installing the new filter
• Reinstall securely and run a short cycle to confirm normal operation

Size: 8-32 x 1/2 inch.

This control panel replaces a damaged or worn console trim to restore the appliance's user interface and protect the control board and buttons. It gives a clean surface for operating the oven, range, or cooktop controls. What it does:

• Provides the outer trim and mounting surface for buttons, knobs, and display elements
• Protects internal control components from spills, heat, and wear
• Restores a flush, finished look when the original panel is cracked, bent, or scratched
• Helps ensure buttons and touch controls register properly by securing their mounting

• One control panel

• Disconnect power before beginning work
• Remove mounting screws and any attached trim pieces; note screw locations for reassembly
• Handle carefully to avoid scratching finished surfaces; use a soft cloth during installation

The Outer Panel is an OEM part for Whirlpool dishwashers. It forms the exterior protective covering at the front of the dishwasher. The panel safeguards the internal machinery, electronic controls, and displays from damage.

Causes of a bad outer panel usually include cracks, chips, or breaks incurred over time from daily use and opening/closing of the dishwasher door. Liquids seeping behind the panel can also degrade surfaces and underlying components.

Symptoms of a bad outer panel involve:

• Physical defects visible like cracks or splits in the protective plastic  
• Difficulty with door alignment due to loose panel mounting points
• Water intrusion indicated by rust or corrosion behind the facia  

This OEM Whirlpool replacement ensures the dishwasher entrance continues providing sleek aesthetics along with protective barriers from impact and moisture penetration. It is compatible with additional Whirlpool brands as well.

The Inlet Tube Nut is an OEM part for Whirlpool dishwashers. It is responsible for securely connecting the water inlet tube to the dishwasher's water valve, ensuring a proper water supply for the appliance.

A bad inlet tube nut can be caused by wear and tear, overtightening or cross-threading during installation, or damage due to accidental mishandling. If you notice water leakage or a loose connection at the water inlet tube, it may indicate a problem with the inlet tube nut.

Symptoms of a bad inlet tube nut include:

• Water leaks or dripping  
• Inconsistent water supply to the dishwasher
• Difficulty in securing or tightening the water inlet tube

Replace your faulty inlet tube nut with this genuine OEM part to restore your dishwasher.

This Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
 

This tab-sump mounting secures the dishwasher sump/dispenser area so detergent tabs and related components stay properly aligned. Replacing a worn or broken mounting restores correct dispenser positioning and helps prevent tabs from falling loose during cycles. What it does:

• Holds the tab/sump assembly in place to maintain proper detergent tab positioning
• Prevents the dispenser or sump from shifting or sagging during operation
• Helps reduce incidents of tabs dislodging or failing to stay seated
• Supports correct alignment of adjacent dispenser components

• Disconnect power and water supply before starting any repair
• Remove the door panel or access cover to reach the sump area
• Inspect surrounding clips and seals; replace any damaged fasteners for a secure fit

This name plate is the appliance's model and serial identification label—an easy way to restore clear product ID for service, parts ordering, and warranty records. Keeps your appliance information visible and readable. What it does:

• Displays manufacturer model and serial numbers and other factory ID details
• Restores a missing or damaged ID label so technicians can identify the correct parts and specs
• Helps when registering the appliance or filing warranty and service requests
• Prevents delays caused by unreadable or absent identification information

• Clean and dry the mounting surface before applying; remove old adhesive residue
• Align carefully and press firmly; some name plates use adhesive backing or mounting tabs
• Do not cover vents, controls, or safety labels when installing

The High Limit Thermostat is an OEM component specifically designed for Whirlpool dishwashers. It monitors temperature fluctuations during wash cycles. 

Causes of a faulty thermostat include mineral coatings or other deposits impeding function over extended periods. Wiring connections may weaken through vibrations.

Symptoms of a bad high limit thermostat include:

• The dishwasher failing to heat properly or heating excessively  
• Unexpected termination of cycles without explanation
• A burnt odor or steam emitting from the dishwasher 

This OEM Whirlpool part is compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore dishwasher models as well.

The Tub Corner Cover is an OEM component specifically designed for Whirlpool dishwashers. It provides protective cladding at the base of the tub wall corners.

Causes of a faulty corner cover can include cracks or chips developing from years of door contact during loading and unloading. Over time, plastic materials may become brittle.

Symptoms of a bad tub corner cover include:

• Exposed undercoating vulnerable to moisture damage   
• Loss of clean aesthetic finish inside tub interior  
• Risk of injury from sharp or jagged edges without the cover

This OEM Whirlpool part is compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore dishwasher models.

This wire harness routes power and signals between appliance components to restore reliable electrical connections and operation. It replaces damaged or worn wiring that can cause intermittent power, control errors, or non-working circuits. What it does:

• Connects control boards, switches, sensors, and motors per the OEM wiring layout
• Restores lost or intermittent electrical continuity caused by frayed or broken wires
• Prevents shorts and unreliable operation when original harness insulation or terminals are compromised
• Supports normal appliance functions tied to the affected circuit (power, controls, sensors)

• One complete wire harness assembly as shown

• Disconnect power (unplug or shut off breaker) before inspecting or replacing the harness
• Verify routing and connector orientation against the appliance wiring diagram before installing
• Avoid pinching wires; secure the harness with existing clips or ties to prevent chafing
• If corrosion or damage is found at connectors, clean or replace terminals as needed

This retainer is a small mounting clip that secures internal components and trim so assemblies stay in place during normal use. Replacing a worn or broken retainer restores proper fit and helps stop rattles and loose parts. What it does:

• Holds panels, trim, or small assemblies in their mounting position
• Prevents clips or parts from falling out or shifting during operation
• Common symptom: loose trim, rattling, or parts that won't stay seated
• Simple, low-profile part used where a secure hold is required

• Disconnect power (or unplug) before inspecting or replacing parts
• Access may require removing covers or trim—keep fasteners handy
• Replace only with the exact retainer to ensure proper fit and retention