Kdfe104 Hbl0 Parts

This light clip secures the interior lamp assembly in place so the refrigerator light stays positioned and protected. It's a small plastic retainer designed to hold the lamp or lens securely behind the housing. What it does:

• Holds the interior lamp or lens assembly in position to prevent movement or rattling
• Keeps the lamp properly aligned so the light bulb and cover stay seated
• Helps prevent contact between the bulb and other components that could cause noise or damage
• Commonly replaced when the lamp cover is loose, rattles, or won't stay clipped in place

• One light clip

• Disconnect power to the appliance before beginning any work
• Access the lamp area by removing the lamp cover or housing per your model's instructions
• The clip typically snaps into place; no special tools are usually required
• Test lamp fit and switch operation before restoring normal use

Color: Stainless

This support mounting bracket secures and aligns internal components to keep assemblies stable and operating smoothly. It helps prevent part movement that can cause noise, misalignment, or improper panel fit. What it does:

• Stabilizes and supports adjacent components or panels to reduce vibration and rattling
• Keeps doors or internal assemblies aligned for correct operation
• Prevents shifting that can lead to intermittent contact or wear
• Helps maintain proper spacing where a fixed mount is required

• Disconnect power or unplug the appliance before beginning work
• Handle sharp edges carefully and use the proper screwdriver or nut driver
• Reuse existing fasteners only if they are in good condition; replace stripped or damaged hardware

This is a replacement fastening nut used to secure appliance components and mounting hardware. It restores a solid connection so panels, brackets, or assemblies stay properly attached and function safely. What it does:

• Secures threaded shafts, studs, or bolts to hold parts in place
• Prevents loosening that can cause rattling, misalignment, or detached panels
• Restores proper mounting for brackets, trim pieces, and small assemblies
• Works wherever the correct threaded nut is required for a secure fit

• Turn off power to the appliance and unplug before servicing
• Hand-start threads to avoid cross-threading, then tighten with appropriate hand tool

This 2-hole disc diverter redirects water flow inside the washer's dispenser/tub assembly so detergent and rinse water route correctly. It helps restore proper dispensing and prevents water from spraying or leaking in the wrong area. What it does:

• Directs incoming water to the correct dispenser or tub channels during fill and rinse cycles
• Helps ensure detergent and fabric softener are delivered at the right time
• Can stop errant water spray or leaks caused by a worn or damaged diverter
• Restores normal water routing when the washer's dispense functions fail or behave inconsistently

• One 2-hole disc diverter

• Disconnect power and turn off the water supply before starting work
• Replace only with the exact OEM part number shown for your model
• Installation may require removing the dispenser assembly or portions of the top/tub cover; your model's service diagram
• Inspect adjoining seals and gaskets during replacement and replace if damaged

This support is a small structural bracket that helps secure internal components and keeps the appliance aligned for reliable operation. It restores proper fit and reduces movement where a worn or broken support allows shifting. What it does

• Holds internal panels or assemblies in the correct position to prevent rubbing and noise
• Restores alignment to doors, drawers, or mounted components that sag or sit unevenly
• Reduces vibration and rattling caused by loose or missing support
• Prevents further wear on fasteners and nearby parts by keeping components stable

• One support bracket

• Disconnect power (and water, if applicable) before starting any repair
• Use basic hand tools; some trims or panels may need removal for access
• Keep track of fasteners and bracket orientation before tightening

This cover is an exterior access panel that protects and conceals internal appliance components while maintaining a finished appearance. It helps keep wiring and controls secure and prevents debris from entering sensitive areas. What it does:

• Shields internal electronics, wiring, and mounts from dust, lint, and accidental contact
• Restores the appliance's finished look by covering openings or service areas
• Helps maintain safe operation by preventing access to live components
• Useful when replacing or servicing internal parts that require a protective panel

• One cover

• Disconnect power (and gas if applicable) before starting any work
• Remove fasteners or clips holding the old cover and replace with this cover using the same hardware
• Use basic hand tools; avoid forcing tabs or screws to prevent damage

This push-in retainer secures panels, trim or light-weight components inside the appliance to prevent vibration and movement during operation. It's a small, low-profile fastener that snaps into a pre-drilled hole for a clean, tool-free hold. What it does:

• Holds interior trim, access panels or wiring looms in place to reduce rattles and movement
• Replaces worn or broken plastic retainers that no longer grip securely
• Helps maintain proper alignment of lightweight components for reliable operation
• Can prevent loose parts from contacting moving components

• Disconnect power to the appliance before starting any work
• Access the area and remove any surrounding trim or panels as needed
• Align retainer with the hole and push straight in until it snaps or seats flush
• Inspect fit after installation; replace if damaged or does not secure properly

This air inlet damper controls cold-air flow from the freezer into the refrigerator compartment to help maintain proper fresh-food temperatures. Replacing a faulty damper restores balanced airflow and more consistent cooling. What it does:

• Regulates the amount of cold air entering the fresh-food section from the freezer.
• Opens and closes as the fridge cycles to maintain set temperatures.
• Commonly replaces stuck, broken, or noisy dampers that cause uneven cooling.
• Often used when the refrigerator is warm while the freezer remains cold or when temperatures fluctuate.

• Disconnect power to the appliance before starting any repair.
• Remove interior panels or grille per your model's service instructions to access the damper; keep screws and clips organized.
• Handle plastic fins and actuator gently to avoid damage; do not force the damper into position.
• Reconnect power and verify damper operation and temperature regulation after installation.

This replacement brace is a structural support bracket that helps stabilize and secure appliance components for reliable operation. Installing the correct brace restores alignment and reduces movement that can cause noise or wear. What it does

• Provides structural support to internal or external assemblies to keep parts properly aligned
• Helps reduce vibration and rattling caused by loose or damaged supports
• Prevents excess movement that can lead to premature wear of adjacent components
• Commonly replaced when the original bracket is bent, cracked, or missing

• One replacement brace/support bracket

• Use appropriate tools and fasteners for your model; retain any original screws if reusable
• Disconnect power (and water if applicable) before beginning any repair for safety
• Inspect surrounding components and mounting points; replace damaged hardware as needed

This main wire harness routes power and signals between an appliance's control and its electrical components, restoring reliable electrical connections for proper operation. Use when a damaged or broken harness causes control or power problems. What it does:

• Connects the control board, sensors, switches and motors to supply power and signal paths
• Replaces frayed, burned or broken wiring that can cause intermittent operation
• Helps stop symptoms like no power to components, controls not responding, or intermittent cycles
• Restores correct routing and secure connector fit for safe operation

• Disconnect all power before starting and verify the appliance is de-energized
• Take photos of the existing harness routing and connector positions before removal
• Route the new harness the same way and fully seat each connector; secure with clips or ties as needed
• If you see heat damage at connectors or terminals, replace harness and inspect mating components.

This hose clamp secures flexible hoses to fittings to prevent leaks and keep connections tight on dishwashers and similar appliances. It's a simple replacement that restores a secure hose seal and prevents water from escaping. What it does

• Holds a drain or water hose firmly to a barb or fitting to stop leaks
• Restores a tight connection when original clamp is corroded, cracked, or loose
• Helps prevent water pooling beneath the appliance and related drip issues
• Typical use: clamp for dishwasher drain/water hose connections

• One hose clamp as pictured

• Disconnect power and shut off water supply before servicing the appliance
• Slide clamp over hose, seat hose fully on the fitting, then tighten clamp evenly until snug
• Replace any corroded or damaged clamps; do not overtighten

This spacer positions and supports the appliance tank/tub assembly to maintain proper alignment and spacing for reliable operation. Replaces a worn or damaged spacer to restore correct fit and reduce movement. What it does:

• Keeps the tank/tub assembly correctly spaced and aligned with the cabinet and mounting points
• Helps prevent rubbing, binding, and excess vibration caused by a missing or damaged spacer
• Restores proper clearance to support seals and hoses that rely on correct tank positioning
• Useful when reassembling the appliance after service or repair

• One spacer

• Disconnect power and water supply before starting any repair
• Access may require removal of outer panels, console, or access covers depending on model
• Handle parts carefully to avoid damaging surrounding seals and wiring; reuse fasteners unless replacement is specified

This replacement support is a molded mounting bracket that secures internal components and helps keep assemblies aligned for reliable operation. It restores proper positioning and reduces movement or vibration that can cause noise or wear. What it does:

• Secures and supports an appliance internal assembly to maintain correct alignment
• Reduces vibration and rattling from loose or worn mounting points
• Helps prevent premature wear by keeping parts properly seated
• Restores fit where a broken, cracked, or missing support causes instability

• One support mounting bracket

• Disconnect power (and water, if applicable) before beginning any repair
• Access and removal may require removing panels or trim; keep fasteners organized
• Inspect adjoining components and fasteners; replace any damaged hardware

This replacement cover restores the appliance's finished appearance while protecting internal components from dust, debris and accidental contact. It helps keep the area sealed and looking like new after repairs. What it does:

• Covers and protects underlying components or openings to prevent debris buildup and accidental contact
• Restores the appliance's exterior appearance after part replacement or service
• Helps reduce dust and lint accumulation in the covered area
• Addresses symptoms such as exposed components, gaps in the exterior, or a damaged/missing outer panel

• One replacement cover

• Disconnect power (and water, if applicable) before starting any repair
• This part typically installs with screws or snaps; keep removed fasteners for reinstallation
• Use basic hand tools; avoid forcing the cover into place to prevent breakage