Kdt207awh-O Parts

The Wire Harness Assembly is an OEM component for Whirlpool dishwashers. It is the main electrical wiring component that connects and transmits power between various areas and modules inside the dishwasher. 

Causes of a bad wire harness can include cracked, frayed, or damaged insulation over wiring due to normal movement and vibration during the wash cycle. 

Symptoms of a bad wire harness assembly include:

• Lights or elements failing to power on as expected  
• Control panel malfunctions or unintended switches in operation modes
• The entire dishwasher ceasing to function

This genuine OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore dishwasher models.

This push retainer is a small press-on fastener that secures components to shafts or studs inside your appliance. It restores a tight, reliable hold so knobs, trim, or linkages don't loosen or fall off during use. What it does:

• Presses onto a shaft or stud to secure knobs, trim, or linkages—no threads required
• Maintains spring tension to resist vibration during normal operation
• Replaces a missing, bent, or weakened retainer
• Common symptoms: loose or wobbly knobs/trim, parts slipping off, or a retainer that won't stay on

• 1 push retainer

• Disconnect power; for gas appliances, also shut off the gas supply
• Access the shaft/stud and carefully remove the old retainer with pliers; avoid damaging adjacent plastic parts
• Press the new retainer on squarely using a deep socket or nut driver; do not hammer directly
• If the mating shaft or component is damaged or deformed, address that before installing the new retainer

A pronged cup washer that secures and cushions mating parts on appliances, restoring proper fit and reducing wobble. Replaces worn or damaged cup-style washers to help maintain stable component alignment and reliable operation. What it does:

• Fits into a cup or socket to hold shafts, knobs, or trim pieces in place
• Pronged design grips the mounting surface to prevent rotation and slippage
• Helps reduce vibration and noise caused by loose or worn washers
• Commonly used when a knob, shaft, or trim feels loose or wobbly

• Disconnect power to the appliance before servicing to avoid shock or injury
• Remove the related knob or trim carefully to access the washer; note orientation for correct reassembly
• Press the washer fully into the cup or socket so the prongs engage the mounting surface
• Inspect the surrounding components for wear and replace any damaged parts

This 10-24 threaded screw secures appliance components that use a #10 machine screw. It provides reliable fastening for panels, brackets, and assemblies so parts stay aligned and stable during normal use and service. What it does:

• Fastens panels, brackets, or assemblies that accept a 10-24 machine screw
• Maintains alignment and structural connection under normal operating loads
• Replaces worn, stripped, or missing screws to restore secure mounting
• Works with sheet-metal and component mating nuts or threaded inserts commonly used in appliances

• One 10-24 threaded screw

• Power tools can be used; avoid overtightening to prevent stripped threads or damaged components
• Disconnect power and follow all safety steps for your appliance before servicing
• Ensure proper engagement and torque to avoid damage

Number-8, 18-thread screw used to secure panels, brackets and small assemblies in Whirlpool appliances. Replacing a missing or damaged screw restores secure mounting and helps stop rattling or loose parts. What it does:

• Fastens trim, panels, brackets or small appliance components that use a #8-18 threaded fastener
• Restores secure mounting when a screw is lost, stripped or damaged
• Helps eliminate vibration-related noise from loose parts
• Simple replacement part for basic fastening needs

• Disconnect power to the appliance before servicing and work on a cool, stable surface
• Use the correct screwdriver or driver bit to avoid cam-out or stripped heads
• Thread in straight and tighten until snug; do not over-torque to avoid stripping threads or damaging components
• Replace with the identical screw type and size for proper fit and function

Color: Biscuit. Size: 13 oz. can. Enamel spray paint.

This jumper is an OEM-style electrical wire connector used to bridge terminals in a Whirlpool appliance to restore circuit continuity and proper component operation. It's a simple replacement part that helps return power or signal paths when the original jumper is damaged. What it does

• Provides a secure electrical connection between two terminals to complete a circuit.
• Restores power or signal routing to components that lose function due to a broken or corroded jumper.
• Common symptom: component or control doesn't receive power or the appliance won't complete a specific cycle.
• Works with control boards and wiring harness assemblies where a factory jumper is used.

• One jumper electrical connector.

• Disconnect power (unplug appliance or shut off breaker) before service to avoid shock or damage.
• Use insulated tools as needed and make secure, tight terminal connections to prevent arcing.

The Pump & Motor unit is an OEM replacement part for Whirlpool dishwasher models. This unit works together to recirculate water, chemically treated, throughout the wash chamber during cycles.

Symptoms of a bad pump & motor unit include:

• Incomplete or inadequate water coverage of dishes
• Draining issues after cycles  
• Strange noises emanating from the unit
• Soiled dishes despite running cycles

Causes can be mineral buildup on motor components over time, cracked pump housings allowing leaks, or failure of motor windings. 

This OEM replacement is compatible with select Whirlpool, Maytag, KitchenAid, Jenn-Air and Kenmore dishwashers.

This stainless steel fine filter traps food particles in the dishwasher sump to help keep wash water cleaner and improve cleaning performance. Durable, corrosion-resistant construction fits the factory filter location. What it does:

• Captures small food debris to prevent recirculation and redepositing on dishes
• Helps maintain proper water flow through the wash system
• Reduces the risk of clogs in the dishwasher pump and spray arms
• Supports consistent cleaning results when the filter is clean and installed correctly

• One stainless steel fine filter

• Disconnect power to the appliance before servicing
• Remove the lower rack and locate the sump area to access the filter
• Clean surrounding area of heavy debris before installing the new filter
• Reinstall securely and run a short cycle to confirm normal operation

Size: 8-32 x 1/2 inch.

The Control Panel is an OEM part for Whirlpool dishwashers. It is responsible for housing the control buttons and indicators that allow you to select and customize your dishwasher's settings and cycles. It provides a user-friendly interface for effortless navigation and control over your dishwasher's functions.

A bad control panel assembly can occur due to wear and tear, physical damage, or electrical issues. If you notice symptoms such as unresponsive buttons, malfunctioning indicators, or a non-functioning control panel, it may be time to replace the the faulty or malfunctioning control panel assembly with this genuine OEM part.

Symptoms of a bad control panel assembly include:

• Unresponsive buttons or indicators
• Malfunctioning or flickering indicators
• Non-functioning control panel

This Whirlpool replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
 

The Inlet Tube Nut is an OEM part for Whirlpool dishwashers. It is responsible for securely connecting the water inlet tube to the dishwasher's water valve, ensuring a proper water supply for the appliance.

A bad inlet tube nut can be caused by wear and tear, overtightening or cross-threading during installation, or damage due to accidental mishandling. If you notice water leakage or a loose connection at the water inlet tube, it may indicate a problem with the inlet tube nut.

Symptoms of a bad inlet tube nut include:

• Water leaks or dripping  
• Inconsistent water supply to the dishwasher
• Difficulty in securing or tightening the water inlet tube

Replace your faulty inlet tube nut with this genuine OEM part to restore your dishwasher.

This Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
 

This tab-sump mounting secures the dishwasher sump/dispenser area so detergent tabs and related components stay properly aligned. Replacing a worn or broken mounting restores correct dispenser positioning and helps prevent tabs from falling loose during cycles. What it does:

• Holds the tab/sump assembly in place to maintain proper detergent tab positioning
• Prevents the dispenser or sump from shifting or sagging during operation
• Helps reduce incidents of tabs dislodging or failing to stay seated
• Supports correct alignment of adjacent dispenser components

• Disconnect power and water supply before starting any repair
• Remove the door panel or access cover to reach the sump area
• Inspect surrounding clips and seals; replace any damaged fasteners for a secure fit

This name plate is the appliance's model and serial identification label—an easy way to restore clear product ID for service, parts ordering, and warranty records. Keeps your appliance information visible and readable. What it does:

• Displays manufacturer model and serial numbers and other factory ID details
• Restores a missing or damaged ID label so technicians can identify the correct parts and specs
• Helps when registering the appliance or filing warranty and service requests
• Prevents delays caused by unreadable or absent identification information

• Clean and dry the mounting surface before applying; remove old adhesive residue
• Align carefully and press firmly; some name plates use adhesive backing or mounting tabs
• Do not cover vents, controls, or safety labels when installing