Kdtm404kbs1 Parts

This retainer is a small mounting clip that secures internal components and trim so assemblies stay in place during normal use. Replacing a worn or broken retainer restores proper fit and helps stop rattles and loose parts. What it does:

• Holds panels, trim, or small assemblies in their mounting position
• Prevents clips or parts from falling out or shifting during operation
• Common symptom: loose trim, rattling, or parts that won't stay seated
• Simple, low-profile part used where a secure hold is required

• Disconnect power (or unplug) before inspecting or replacing parts
• Access may require removing covers or trim—keep fasteners handy
• Replace only with the exact retainer to ensure proper fit and retention

This is a replacement fastening nut used to secure appliance components and mounting hardware. It restores a solid connection so panels, brackets, or assemblies stay properly attached and function safely. What it does:

• Secures threaded shafts, studs, or bolts to hold parts in place
• Prevents loosening that can cause rattling, misalignment, or detached panels
• Restores proper mounting for brackets, trim pieces, and small assemblies
• Works wherever the correct threaded nut is required for a secure fit

• Turn off power to the appliance and unplug before servicing
• Hand-start threads to avoid cross-threading, then tighten with appropriate hand tool

This support is a small structural bracket that helps secure internal components and keeps the appliance aligned for reliable operation. It restores proper fit and reduces movement where a worn or broken support allows shifting. What it does

• Holds internal panels or assemblies in the correct position to prevent rubbing and noise
• Restores alignment to doors, drawers, or mounted components that sag or sit unevenly
• Reduces vibration and rattling caused by loose or missing support
• Prevents further wear on fasteners and nearby parts by keeping components stable

• One support bracket

• Disconnect power (and water, if applicable) before starting any repair
• Use basic hand tools; some trims or panels may need removal for access
• Keep track of fasteners and bracket orientation before tightening

The Harness-Wire Assembly is an OEM component specifically designed for Whirlpool dishwashers. This assembly consists of wiring harnesses that connect and transmit power to various electronic control boards and components inside the dishwasher.

Symptoms of a bad harness-wire assembly can include intermittent or complete failure of functions like dispensing, heating, draining, or the wash motor running due to open or damaged connections within the wiring. 

Causes may involve normal wear and strain on wires from repeated use over time, moisture damage to insulation coatings on wires, or damage to connectors from improper installation or handling. 

Causes of a bad harness-wire assembly include:

• Portions of the cycle like heating not activating
• Wash motor failing to run or running intermittently
• No dispensing from the detergent dispenser
• Drain pump failing to engage 

This OEM part is also compatible with some KitchenAid, Jenn-Air, Amana, and Kenmore models that utilize similar components.

This replacement support is a mounting bracket that secures and stabilizes internal components, restoring proper alignment and reducing movement or vibration. It's a direct-fit service part when the original support is cracked, bent, or missing. What it does:

• Provides a stable mounting point for internal assemblies to prevent shifting during operation
• Restores proper alignment to reduce rattling, vibration, or intermittent contact issues
• Helps maintain correct spacing for connected components and wiring
• Prevents further wear or damage caused by loose parts

• One support

• Disconnect power before starting any repair to avoid shock or injury
• Handle small fasteners carefully; keep track of any clips or screws removed
• Reuse original hardware only if undamaged;

This hose clamp secures flexible hoses to fittings to prevent leaks and keep connections tight on dishwashers and similar appliances. It's a simple replacement that restores a secure hose seal and prevents water from escaping. What it does

• Holds a drain or water hose firmly to a barb or fitting to stop leaks
• Restores a tight connection when original clamp is corroded, cracked, or loose
• Helps prevent water pooling beneath the appliance and related drip issues
• Typical use: clamp for dishwasher drain/water hose connections

• One hose clamp as pictured

• Disconnect power and shut off water supply before servicing the appliance
• Slide clamp over hose, seat hose fully on the fitting, then tighten clamp evenly until snug
• Replace any corroded or damaged clamps; do not overtighten

This 3-channel feedtube routes water to the appliance's dispenser/ice system to ensure proper delivery where needed. Replaces a damaged or cracked feedtube to help restore correct water flow and reduce leaks. What it does:

• Directs water through three separate channels to the ice maker/dispenser plumbing
• Prevents cross-flow between channels for reliable filling and dispensing
• A damaged tube can cause leaks, weak dispensing, or the ice maker not filling
• Fits the OEM routing to maintain correct water pressure to downstream components

• One 3-channel feedtube

• Disconnect power and shut off the water supply before servicing
• Handle carefully to avoid kinking; inspect and replace any worn seals or grommets
• Tighten connections evenly to prevent leaks; check for leaks after restoring power/water
• Use manufacturer diagrams to confirm routing and orientation during installation

This replacement support is a molded mounting bracket that secures internal components and helps keep assemblies aligned for reliable operation. It restores proper positioning and reduces movement or vibration that can cause noise or wear. What it does:

• Secures and supports an appliance internal assembly to maintain correct alignment
• Reduces vibration and rattling from loose or worn mounting points
• Helps prevent premature wear by keeping parts properly seated
• Restores fit where a broken, cracked, or missing support causes instability

• One support mounting bracket

• Disconnect power (and water, if applicable) before beginning any repair
• Access and removal may require removing panels or trim; keep fasteners organized
• Inspect adjoining components and fasteners; replace any damaged hardware

The Lower Door Seal Assembly is an OEM part for Whirlpool dishwashers. As a key component, this seal is designed to create a tight barrier between the door interior and tub during wash cycles. The pliable rubber seal provides a sturdy gasket to block water, detergent, and sound.

Causes of failure involve mineral buildup, cracks from repeated use, or degradation of adhesive over time compromising the seal. 

Symptoms of a faulty seal assembly include: 

• Puddles or leaks from beneath the door frame
• Higher water consumption or longer cycles   
• Increased noise levels during operation

This OEM Whirlpool replacement is also compatible with select KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, and other brands.

The Pump Filter is an OEM part for Whirlpool dishwashers. It is a filter that screens debris from entering the pump and wash arms during the dishwashing cycle.

The pump filter is responsible for catching food particles and other residue, preventing clogs and maintaining optimal water flow throughout the dishwasher. It ensures the pump and other internal components are kept clean.

Symptoms of a clogged or damaged pump filter include:

• Excessive noise or vibrations coming from the pump area
• Slow or reduced water drainage
• Built up residue in the filter housing or sump area
• Incomplete cleaning or drying results

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Dishrack Stop Clip is an OEM component specifically designed for Whirlpool brand dishwashers. This clip functions to hold the upper dish rack in place during washing cycles.

Symptoms of a bad dishrack stop clip can include:

• Movement or vibration of the upper dish rack during washing
• Visible damage, bending or broken tabs on the mounting clip itself  
• Inability to smoothly slide or remove the upper dish rack

Causes of a bad dishrack stop clip usually stem from normal wear and tear over extended use. Overtight loading of dishes could also put excessive stress on the clip.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and some Kenmore models.

Replacement door hinge designed to restore proper alignment and smooth opening for compatible refrigerator doors. Replaces worn or damaged hinges to reduce sagging, rubbing, and uneven closing for better seal and operation. What it does:

• Supports and pivots the refrigerator door for smooth opening and closing.
• Restores correct door alignment to improve gasket contact and cold-air seal.
• Stops door sag, uneven gaps, or rubbing against the cabinet.
• Helps eliminate noisy or stiff door movement caused by a worn hinge.

• Disconnect power to the appliance and remove food from the door area before starting.
• Support the door securely while removing and installing the hinge to prevent dropping or damage.
• Reuse original fasteners only if undamaged; replace any stripped or corroded hardware.

The Float Switch is an OEM part for Whirlpool dishwashers. It is a safety component that detects water levels and monitors flood conditions. The float switch ensures the dishwasher only runs water when needed and shuts off water flow if it detects a potential leak or overflow situation. 

Symptoms of a bad float switch include: 

• The dishwasher fails to fill with water or stop the water when the cycle is complete
• Loud buzzing or humming noises coming from the float switch area  
• Water leaks inside or outside of the dishwasher due to overfilling
• Repeated error codes related to flooding or water level detection

Causes of a bad float switch could be wear and tear over time, defective wiring or electronic components inside the switch, or damage from moisture or leaks. 

This OEM replacement is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Dishwasher Plate-Latch Strike is an OEM part for Whirlpool dishwashers. It is a part that holds the dishwasher door shut during wash cycles. Precise alignment of the strike allows for tight sealing and proper engagement with the door latch.

Causes may arise from normal wear over lengthy use, deformations from repetitive door actions, or incidental damage.

Symptoms of a bad strike can include:

• Door that feels loose and doesn't fully latch closed
• Gaps seen around the door sealing surface
• Water leaks or insufficient drying performance
• Difficulty fully closing or reopening the door

This genuine OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.