Kenmore 27086603 Parts

This choke control lever automatically regulates the combined amount of air and fuel that come together in a small gasoline powered engine's carburetor to give a cold engine a fuel-rich mixture when the motor is first started. The control lever has several positions that allow it to adjust the fuel/air mixture in lawn equipment such as lawn mowers, snow blowers, tillers, chippers, log splitters, and other small gas engines. Over time with regular use, the control lever may become worn and must be replaced. There are several signs that indicate a choke control lever may be failing. If the gas tank is full of fresh gasoline but the engine refuses to start, if the engine starts and quickly floods, or if the engine runs at top speed but does not idle, the choke control level may be need to be replaced. Should the choke control lever need to be replaced, it is essential to use an OEM genuine manufactured replacement part such as this one. OEM parts are built to the exact specifications of the equipment's original parts. This part is compatible with Huskee, Cub Cadet, Yard Man, MTD, Yard Machines, and Troy-Bilt brand equipment.

This is an OEM primer hose assembly replacement sourced directly from the manufacturer. It is used on various outdoor lawn and garden small engines. The primer hose is inserted into the fuel tank. This hose then connects to a bulb that forces the fuel to the carburetor to start the engine. Excess fuel is forced back into the fuel line. Normal wear and tear can cause the line and primer bulb to become brittle and crack, making it unable to move fuel into the carburetor.A Phillips screwdriver, long-nosed pliers, standard screwdriver, and a pan to drain the fuel are necessary to remove and replace the primer hose assembly. This project can be complete in less than half an hour. Drain the fuel from the fuel tank and fuel lines before starting the project. Remove the rear cover and take the carburetor and fuel lines off the engine. Install the primer hose and primer bulb. Reinstall the parts and fill the fuel tank. Pump the primer bulb to make sure it is installed correctly.This primer hose assembly is made of plastic and rubber and is sold as an individual kit. It is compatible with tillers and other small engines manufactured by MTD, Cub Cadet, and Yard Machines.

This is a genuine OEM gear governor assembly sourced from the manufacturer for use in many small engines in lawn and garden equipment. The gear governor assembly engages the drive shaft on small engines and maintains the speed of the engine based on presets from the manufacturer. The governor adjusts the throttle as the load increases or decreases. If the governor is not working properly, the throttle would have to be adjusted manually when the load increases and decreases.If the engine runs too slow or too fast, or if it surges, the governor may need to be adjusted. With the engine in idle, move the governor lever manually to open up the throttle. If the governor is working properly, it should push the arm back to its idle position. Fine-tune the governor using the screw on the bottom of the arm of the governor. Loosen this screw so that the throttle is wide open. Locate the clip that is connected to the governor shaft and turn clockwise. This sets the governor.The gear assembly is sold individually. It is designed for an array of small engines. This governor assembly is compatible with various models MTD, Cub Cadet, and Troy-Bilt engines.