Kenmore 36275291790 Parts
Genuine Ge part
By: Ge
Part Number: WB2K17
Genuine Ge part
By: Ge
Part Number: WB2K8
Genuine Ge part
By: Ge
Part Number: WB13K25
The Spark Module is an OEM replacement part for GE gas ranges. It is responsible for generating electric sparks to ignite the gas burners on the cooktop. The spark module produces consecutive sparks when a surface burner knob is turned on, which ignite the gas mixture and allows the burner flame to ignite safely and consistently.
Causes of a bad spark module can include faulty electrodes, worn internal components that hamper sparking, or damage due to moisture intrusion or power surges over time.
Symptoms of a bad spark module include:
- Burners that will not ignite or only intermittently ignite
- Flashback or burning above the burner head
- The smell of gas when turning burners on
This GE replacement part is also compatible with models from Hotpoint, RCA, and certain Kenmore gas ranges.
Do-It-Yourself Stories from Customers like You
GE Gas Cooktop Wouldn't Light Michael S. • Owasso , OK • March 17, 2014
My problem was intermittent spark and then no spark. My first fix was to give my wife one of those long BBQ grill lighters but after about a week she told me to "FIX IT". After researching the problem on the internet I determined it was likely one of three things: IGNITERS (not likely), SWITCHES (possible), or SPARK MODULE (most likely). I ordered the Spark Module on Sunday night and it arrived on Tuesday. I was totally surprised by the speed of delivery. Took about 30 minutes to install and...
Read more
More
Genuine Ge part
By: Ge
Part Number: WB1K56
This small metal clip secures the surface burner spark electrode to its bracket or burner base, holding the tip at the proper gap for reliable ignition. Replace a missing, bent, or corroded clip to help restore consistent sparking.
- Holds the surface burner spark electrode firmly in position near the burner head
- Maintains correct alignment and gap so the igniter can spark to the burner
- Can help with delayed ignition, intermittent sparking, or a burner that won't light
- Typical signs include a loose/wobbly electrode, visible damage, or a missing clip
What's included: 1 mounting clip Install notes:
- Disconnect power and shut off gas before servicing
- Lift the cooktop or remove burner components to access the electrode; note clip orientation
- Transfer the electrode into the new clip and seat the clip securely in its bracket or base
- Avoid stressing the electrode's ceramic insulator; verify the tip is aimed at the burner rim and test ignition
Do-It-Yourself Stories from Customers like You
Cooktop needed aesthetic overhaul. Barbara B. • Wyncote , PA • March 26, 2020
I replaced damaged burner bowls (drip pans), now my cooktop looks like new!
Read more
More
Genuine Ge part
By: Ge
Part Number: WB57K2
Color: Black
Do-It-Yourself Stories from Customers like You
The front door glass of my ge xl44 gas range was shattered by a flying crockpot Kurt N. • South Williamsport , PA • May 10, 2017
I lifted up the door and removed it.
Next, I laid out newspaper on the floor.
I placed the door on the newspaper upside down.
With my socket driver, I removed the bottom door trim.
I then used a pocket knife to remove the remaining glass in the top groove.
I then slid in the new glass and reinstalled the trim.
It took 30 minutes to replace the glass and clean up the glass
fragments from the previous door glass.
I looked up a video on how to replace it Utube.
Personal safety equipment - Safety...
Read more
More
Genuine Ge part
By: Ge
Part Number: WB16K13
Genuine Ge part
By: Ge
Part Number: WB49K2
Do-It-Yourself Stories from Customers like You
Burned on pans Cheryl R. • Piney Creek , NC • October 30, 2015
New pans
Read more
More
Genuine Ge part
By: Ge
Part Number: WB7K5338
Do-It-Yourself Stories from Customers like You
End caps for oven door had broken and kept falling out Barbara L. • Roanoke , VA • January 05, 2019
Somewhat difficult to slide back on because pieces of the old tabs were stuck in the crevace, but once I realized and fished them out the next challenge was finally figuring out part went inside the crevace and part (a tab) went outside on the back of the handle. If you bend over and look up underneath it is easy to see how it goes, but apparently over the years the handle had gotten just out of shape enough that the caps did not readily slide on. Be careful you don't snap a tab or post off. ...
Read more
More
Genuine Ge part
By: Ge
Part Number: WB2K11
Genuine Ge part
By: Ge
Part Number: WB2X1082
Clip for door hinge.
Do-It-Yourself Stories from Customers like You
Broken door hinge. Shari W. • Evansville , IN • February 07, 2018
By replacing the hinge.
Read more
More
Genuine Ge part
By: Ge
Part Number: WB7K5339
This handle cap is a replacement end cover that restores the clean finished look and protects the handle mounting on compatible refrigerators. It keeps the handle edges covered and helps prevent snags and cosmetic damage. What it does:
- Covers and protects the exposed end of a refrigerator door handle for a finished appearance
- Conceals handle mounting hardware and reduces dirt build-up around the handle area
- Helps prevent clothing snags and minimizes wear at the handle end
- Matches light white finish to blend with white appliance trim
What's included:
Install notes:
- Remove original cap by following the appliance manual; some models use hidden clips or a retaining screw
- Keep existing mounting hardware — this cap is a cosmetic cover and typically uses factory fasteners
- Avoid over-tightening clips or screws to prevent cracking the cap
Do-It-Yourself Stories from Customers like You
End caps for oven door had broken and kept falling out Barbara L. • Roanoke , VA • January 05, 2019
Somewhat difficult to slide back on because pieces of the old tabs were stuck in the crevace, but once I realized and fished them out the next challenge was finally figuring out part went inside the crevace and part (a tab) went outside on the back of the handle. If you bend over and look up underneath it is easy to see how it goes, but apparently over the years the handle had gotten just out of shape enough that the caps did not readily slide on. Be careful you don't snap a tab or post off. ...
Read more
More
Genuine Ge part
By: Ge
Part Number: WB10K13
Genuine Ge part
By: Ge
Part Number: WB9K1
Do-It-Yourself Stories from Customers like You
Two springs on oven door were worn out William T. • Washington , DC • February 06, 2019
Replaced the oven door springs.
Read more
More
Genuine Ge part
By: Ge
Part Number: WB01K10004
Color: White. Mounting screw for end caps.
Do-It-Yourself Stories from Customers like You
Needed to replace two screws that were rusted Russell S. • Jefferson , GA • May 22, 2020
Replaced screws, would have liked to replace discolored plastic end plates but not for $35 to $40 dollars per end cap.
Read more
More
Genuine Ge part
By: Ge
Part Number: WB24X415
Color: Black
Do-It-Yourself Stories from Customers like You
Old worn parts Billy S. • Newport News , VA • February 26, 2016
Easy removal of worn parts and easy installation of new parts.
Read more
More
Genuine Ge part
By: Ge
Part Number: WB53K35
Do-It-Yourself Stories from Customers like You
The panel on the oven bottom was pitted and needed to be replaced Kenneth W. • Buffalo , MN • November 29, 2014
Simple as can be. Took 2 screws out, pulled out the old panel, and put the new one in. Done in five mintures
Read more
More