Kenmore 79573133410 Parts

This tray assembly is the replacement support tray for the refrigerator fresh room/crisper area, restoring stable support and proper drainage for stored produce. It helps keep drawers aligned and prevents spills from spreading. What it does:

• Supports the fresh room/crisper drawer so it slides and seals correctly
• Provides a flat, stable surface to hold produce and small food items
• Directs minor spills and condensation toward the refrigerator's drainage path
• Replaces cracked, warped, or damaged trays that cause uneven drawers or pooling

• Remove food and the crisper drawer before replacing the tray
• Slide the drawer out, lift or unclip per your model's method, then set the new tray in place
• Avoid forcing the tray; confirm alignment with rear/side rails before reinstalling the drawer

This PTC cover is the protective housing that shields a PTC sensor/assembly from debris and physical damage, helping maintain reliable sensor performance and prolong component life in the appliance. What it does:

• Protects the PTC sensor or PTC assembly from dust, impact, and accidental contact
• Helps prevent shorting or intermittent sensor signals caused by contaminants
• Supports proper positioning and mounting of the PTC component
• Can help address symptoms such as visible sensor damage, exposed wiring, or intermittent operation related to a compromised sensor housing

• Disconnect power to the appliance before starting any repair
• Remove the outer panel(s) as needed to access the PTC location; handle surrounding wiring and components carefully
• Replace only with the correct OEM cover to ensure proper fit and protection

This cap assembly for the duct secures and seals a dryer/exhaust duct connection to restore proper airflow and help prevent leaks. Designed to replace a worn or damaged duct cap and keep the vent path intact. What it does:

• Caps and secures the duct outlet to maintain a tight connection and reduce air leakage
• Helps direct exhaust airflow through the duct instead of escaping at the connection
• Can reduce lint and moisture escaping at a faulty or damaged duct joint
• Commonly replaced when the original cap is cracked, broken, or no longer holds the duct in place

• One cap assembly

• Disconnect and power off the appliance before servicing; follow the manufacturer's service manual
• Basic hand tools typically required; check panel or vent access before starting
• Inspect surrounding duct and fasteners; replace damaged clamps or tape as needed

This pipe holder is a small plastic clip that secures tubing and small pipes inside the appliance, helping keep lines organized and preventing rubbing or disconnection. It restores proper routing and reduces vibration-related noises. What it does:

• Holds and secures water, drain, or refrigerant tubing to prevent sagging and chafing
• Keeps lines routed away from moving parts to reduce wear and noise
• Helps maintain proper tube alignment to avoid strain on fittings
• Commonly replaced when the original clip is cracked, broken, or missing

• Disconnect power and water before working on the appliance
• Inspect surrounding tubing and fittings for damage when replacing the clip
• Typically installs as a push-fit or snap-on clip; use gentle pressure and avoid forcing
• Replace broken or brittle clips to prevent tubing damage or leaks

This filter head assembly holds and secures the refrigerator's inline water filter cartridge, providing a sealed connection to the water lines for reliable flow and filtration. Replace a damaged head to stop leaks and restore normal dispensing. What it does:

• Secures the water filter cartridge and provides the water-line connections for the refrigerator's dispensing and ice systems
• Creates a sealed path to prevent leaks at the filter connection
• Restores proper water flow when a cracked or worn head restricts or leaks
• Helps ensure water passes through the filter media rather than bypassing it

• One filter head assembly

• Turn off the refrigerator ice/water dispenser and shut off the household water supply before replacing
• Relieve pressure by dispensing water after shutoff and carefully disconnect tubing; check and replace any worn O-rings or seals
• Hand-tighten connections, then check thoroughly for leaks when water is restored

This damper cushions and isolates the refrigerator compressor to reduce vibration and noise for smoother operation. It helps maintain stable compressor mounting and prevents metal-to-metal contact that can cause wear or rattling. What it does:

• Absorbs compressor vibrations to reduce noise and movement
• Helps protect the compressor housing and mounting points from shock
• Can reduce rattling or knocking sounds originating near the compressor area
• Supports proper alignment of the compressor assembly during operation

• One compressor damper (mounting isolator)

• Turn off power at the breaker and unplug the appliance before servicing
• Inspect mounting area and hardware; replace any damaged fasteners before installing the damper
• Position the damper on the compressor mount as shown in the service manual and secure per OEM guidance

This replacement freezer tray is a direct-fit internal pan that catches drips and helps keep the freezer interior clean and organized. It restores proper drainage and containment for damaged or missing trays. What it does

• Replaces a cracked, warped, or missing freezer tray to prevent leaks and pooled water
• Guides melt water toward the freezer drain to reduce ice buildup and odors
• Provides a flat, stable surface for items stored in the freezer compartment
• Matches OEM fit and mounting points for straightforward replacement

• One replacement freezer tray

• Intended for in-compartment installation; remove food and unplug the appliance before starting
• Handle gently to avoid cracking plastic; wear gloves to protect hands and edges
• If tray mounts to clips or rails, align tabs before pressing into place; do not force
• Check freezer drain and gasket seating while tray is out; clean any debris before reinstalling

This rail guide assembly supports and guides a sliding drawer/rack along its track so it opens and closes smoothly. Replacing a worn or broken guide restores proper alignment and motion, helping prevent sticking, jamming, or uneven travel.

• Supports and stabilizes the drawer/rack on its slide rail
• Helps ensure smooth, straight opening and closing
• Can address issues like binding, noise, or misalignment
• Replaces cracked, warped, or broken guide components

• Disconnect power and, if applicable, shut off water before servicing
• Remove the drawer/rack and retain any reusable hardware
• Install the new guide in the same orientation as the original
• Test movement for smooth travel before fully reassembling

This refrigerator water tank holds a reserve of water inside the fresh food section so the dispenser delivers a steady, chilled flow. Replace the reservoir if it's cracked, leaking, or internally restricted.

• Stores and chills dispenser water inside the refrigerator
• Helps maintain consistent dispenser flow and pressure
• Damage can cause leaks under drawers or inside the fresh food compartment
• Kinks or blockages can reduce flow or stop water dispensing

• Unplug the refrigerator and shut off the household water supply; dispense water to relieve line pressure.
• Access the tank behind the crisper/deli area; note tubing routing and connection points before removal.
• For push-to-connect fittings, depress the collar to release lines; cut tubing square and fully seat when reconnecting, then perform a gentle tug test.
• Restore water and power, check all connections for leaks, and purge air by dispensing water.

This door gasket assembly forms the sealing perimeter for a refrigerator door to help maintain proper cold temperatures and reduce air leaks. Replacing a worn gasket restores a tighter seal and helps prevent frost and moisture buildup. What it does:

• Seals the gap between the door and cabinet to keep cold air inside
• Reduces frost buildup and prevents warm air infiltration
• Helps maintain consistent interior temperature and efficient operation
• Commonly replaced when the seal is cracked, torn, warped, or no longer grips

• Disconnect power to the appliance before starting any repair
• Clean the door flange and mating surfaces thoroughly before installing the new gasket
• Seat the gasket evenly into the channel, working from one side and smoothing to avoid twists
• If the gasket is stiff, warm gently per OEM guidance to aid forming; do not use open flame or excessive heat

This tray cover assembly replaces a cracked or missing ice tray cover to keep ice protected and help the ice bin stack and slide correctly. It restores a clean seal and simple access to the ice storage area. What it does:

• Covers and protects ice in the ice bin from odors and debris
• Helps maintain proper alignment and sliding action of the ice bin
• Prevents spills and reduces ice melting caused by gaps or damage
• Commonly replaced when the cover is cracked, warped, or missing

• One tray cover assembly

• Disconnect power to the appliance before servicing to avoid injury
• Remove the ice bin and any remaining ice before installing the cover
• Handle plastic components carefully to avoid cracking; align tabs and slides before seating

This guide assembly is a replacement mounting guide that helps align and secure the TV's front panel and internal components to restore proper fit and reduce movement. It's a direct-fit part intended for OEM-style repairs. What it does:

• Holds and aligns the TV front bezel or panel for correct fit and finish
• Secures internal components to prevent shifting during use or transport
• Helps eliminate panel rattles, gaps, or misalignment caused by a damaged guide
• Restores proper assembly after impact or wear to improve appearance and stability

• One guide assembly

• Disconnect power and remove the TV from its stand before beginning
• Follow the TV service manual for safe disassembly and reassembly steps
• Keep track of screws and small parts; use proper tools and a soft work surface