Kenmore 91193410010 Parts
Genuine Ge part
By: Ge
Part Number: WB44T10010
The Oven Bake Element is an OEM replacement part for GE ovens. It is a crucial component that generates the heat necessary for baking and roasting functions within the oven cavity.
Dimensions:
- 18" side to side 19.50" from the mounting bracket to the back
- 2-3/4" between terminal centers
- 3" from the terminal to the back plate (calrod bent at a 45-degree angle)
- Male Spade 1/4" terminals
Symptoms of a bad oven bake element include:
- Uneven heating or hot/cold spots within the oven
- Oven taking longer than usual to reach the desired temperature
- Element glowing irregularly or not at all during the baking cycle
Causes of a bad bake element can range from simply burning out due to repeated use over time to physical damage caused by drips, spills, or impact.
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
This part fixes the following symptoms
-
Little to no heat when baking
-
Oven not heating evenly
-
Won't start
See more...
Do-It-Yourself Stories from Customers like You
The radiant elements had been dead for years the bake element failed spectacularly on Thanksgiving Christine W. • Golden Valley , MN • December 04, 2020
It took a few of us. One to vacuum up the fire extinguisher residue. One to trip the breaker. One to provide light. One to clean out under the stove while it was pulled out. I disconnected the bake element. I needed help to disconnect one of them because it was very tight. I put the element into the oven and reconnected the right side, very easy. The left side fell back into the slot. Curses ensued. I removed the back plate and it was very easy to thread the left wire back into the oven and...
Read more
More
$58.45
- Compare At:
-
$91.24
- You Save:
-
$32.79
Genuine Ge part
By: Ge
Part Number: WB21X22134
The Oven Temperature Sensor Assembly is an OEM replacement part for GE electric wall ovens. It is responsible for accurately reading the oven's internal temperature to provide precise temperature control and safe operation. Consistent and precise temperature readings are necessary for repeatable cooking results.
Symptoms of a bad temperature sensor include:
- Inability to reach or maintain set cooking temperatures
- Fluctuating temperatures causing inconsistent results
- Error codes or fault messages related to temperature regulation
- Potential safety concerns if temperatures run too high or low
Causes of a faulty sensor can be due to failures over extended usage, exposure to high heat cycles, or impedance changes due to dirt or mineral deposits. Precise temperature readings allow for confident cooking.
This OEM GE replacement sensor is also compatible with Hotpoint, RCA, and some Kenmore electric wall oven models.
This part fixes the following symptoms
-
Oven is too hot
-
Won't start
-
Little to no heat when baking
See more...
Do-It-Yourself Stories from Customers like You
Oven would not come to full temperature; unreliable heating; heating elements apparently ok. Stewart W. • Silver Spring , MD • May 07, 2022
My mother's GE range was not coming up to full heat (very far from it), and I was hearing a lot of relay-clicking coming from the control board. The heating elements seemed good. I suspected the control board was faulty, but there was a chance that it might be the (*much* less expensive) temperature sensor, so I ordered both from AppliancePartsPros.com (which got the parts to me very fast) so I could try the T-sensor first. After removing the doors and the back panel of the oven, and taking out...
Read more
More
$15.26
- Compare At:
-
$21.22
- You Save:
-
$5.96
Genuine Ge part
By: Ge
Part Number: WB31T10011
The 8 Inch Large Burner Bowl is an OEM replacement part for GE ranges and cooktops. This component is designed to accommodate the larger burners on the cooking surface, providing a stable and safe platform for pots and pans during cooking.
Symptoms of needing to replace the 8 inch large burner bowl include:
- Cracks, chips, or damage to the bowl's surface
- Warping or deformation due to excessive heat
- Difficulty in properly positioning pots and pans on the burner
Causes of a faulty burner bowl can include normal wear and tear over time, exposure to extreme temperatures or thermal shocks, or physical damage due to impact or mishandling.
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore range and cooktop models.
Do-It-Yourself Stories from Customers like You
Just extremely old and ugly burner trays James B. • Corinth , TX • November 17, 2014
I spent hours searching for the right trays, knowing only that the stove is GE, and what the trays look like, including exact dimensions. I ordered one set that had exact measurements, and they even explained how the measurements are taken. But the trays were larger than described by 3/8 inch, and I had to pay shipping to return them. I suggested that they correct their description, but the lady did not think I was right. I said just measure them yourself, as per the method that your...
Read more
More
$12.44
- Compare At:
-
$16.04
- You Save:
-
$3.60
Genuine Ge part
By: Ge
Part Number: WB31T10010
The 6 Inch Small Burner Bowl is an OEM part for GE stoves and ranges. It is a durable and heat-resistant bowl that sits beneath the heating element of the small burner, providing a stable and level surface for your cookware. The small burner bowl helps distribute heat evenly and protects the cooktop from spills, stains, and other messes. For the matching 8-inch large burner bowl order WB31T10011.
A bad small burner bowl can be caused by regular use, accidental damage, or it may become discolored, warped, or rusted over time.
Symptoms of a bad small burner bowl include:
- Difficulty in cleaning or removing stubborn stains.
- A loose or wobbly heating element.
- Visible damage such as cracks or chips on the bowl.
This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.
Do-It-Yourself Stories from Customers like You
Just extremely old and ugly burner trays James B. • Corinth , TX • November 17, 2014
I spent hours searching for the right trays, knowing only that the stove is GE, and what the trays look like, including exact dimensions. I ordered one set that had exact measurements, and they even explained how the measurements are taken. But the trays were larger than described by 3/8 inch, and I had to pay shipping to return them. I suggested that they correct their description, but the lady did not think I was right. I said just measure them yourself, as per the method that your...
Read more
More
$10.37
- Compare At:
-
$15.37
- You Save:
-
$5.00
Genuine Ge part
By: Ge
Part Number: WB17T10006
The Terminal Block Kit is an OEM replacement part for GE electric ranges. This kit replaces the points of connection delivering power to control circuits and surface coil elements atop the cooktop.
Causes of failure are prolonged heat cycling which slowly breaks down solder joints and insulator coating on terminals conducting power. Liquids spilled can seep into connection areas over time promoting electrical faults.
Symptoms of a faulty terminal block include:
- Inability to ignite or regulate specific burners
- Burners that glow intermittently or fail to respond
- Tripped circuit breakers upon use of problematic zones
- Buzzing or cracking noises from under cooktop areas
This genuine GE kit is also compatible with Hotpoint and RCA electric ranges.
This part fixes the following symptoms
-
Element will not heat
-
Won't start
See more...
Do-It-Yourself Stories from Customers like You
THE TERMINAL BLOCK WAS BURN AND IT DOES NOT TURN HOT. Kenny W. • San Jose , CA • April 06, 2014
I ORDER THE TERMINAL BLOCK KIT, AND FOLLOW THE VIDEO HOW TO REPAIRE. IT IS VERY EASY.IT TOOK ME 10 MIN.
Read more
More
$19.54
- Compare At:
-
$25.40
- You Save:
-
$5.86
Genuine Ge part
By: Ge
Part Number: WB44T10009
The Oven Broil Element is an OEM part for GE ovens. This element is located at the top of the oven cavity and is responsible for broiling, providing high heat for cooking tasks such as searing meats or browning the top of dishes.
Causes of a bad Oven Broil Element can include prolonged use, leading to eventual wear and tear, exposure to food spills and grease that can corrode or damage the element, and electrical issues that may cause it to fail prematurely.
Symptoms of a malfunctioning Oven Broil Element include:
- The element not glowing red when the broil function is activated
- Uneven cooking or browning of food
- The oven taking longer than usual to broil
- No heat production when the broil setting is selected
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
This part fixes the following symptoms
-
Little to no heat when broiling
See more...
Do-It-Yourself Stories from Customers like You
Bake unit cracked and started glowing and sparking like the sun both elements replaced Steven S. • Somerset , KY • April 21, 2015
Easy fix. Both elements replaced while I was at it, so all new. Figured if one went the other was going to follow.
CIRCUIT BREAKER OFF. Removed the back metal panel with my nut driver for the hex head screws. Note where the panel may slip under tabs for support. Remove slip on electrical connections on upper and lower elements. May need a pliers. (I did not want to just pull the element and the wires into the oven with the element and remove them there, like a technician would do. After 15...
Read more
More
$54.36
- Compare At:
-
$86.47
- You Save:
-
$32.11
Genuine Ge part
By: Ge
Part Number: WB2X8228
The Element Receptacle and Wire Kit is an OEM part for GE ranges and ovens. It serves as a crucial component in connecting the heating element to the power source, ensuring that electricity can flow to the element for heating.
This kit typically includes a receptacle, wires, and possibly other connectors or hardware needed for installation. Proper connection via this kit is essential for the heating element to function correctly and efficiently.
Symptoms of a bad Element Receptacle and Wire Kit include:
- Heating element not heating properly or at all
- Burn marks or corrosion on the receptacle
- Visible damage or wear on the wires
- Intermittent heating, indicating a loose connection
This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.
This part fixes the following symptoms
-
Won't start
-
Element will not heat
See more...
Do-It-Yourself Stories from Customers like You
One of the burners on my 1990s (?) Hotpoint electric stove was unreliable heating up around 2/3 of the time Earl R. • Presque Isle , ME • August 11, 2022
I ordered the recommended Infinite Heat Switch Kit and Element Receptacle and Wire Kit and installed them. The latter was a breeze, appearing to be exactly the same as the original, except for the wire color. The switch, though, was another story. It is a RobertShaw "replacement" part, designed, it seems, for use in the greatest number of original units as possible. The most obvious difference between this switch and the original (besides its comparatively small size) is the long, segmented...
Read more
More
$21.38
- Compare At:
-
$29.41
- You Save:
-
$8.03
Genuine Ge part
By: Ge
Part Number: WB1X500D
These GE screws are a 12-pack of OEM replacement parts responsible for securing and fastening various components and panels in a GE range or oven. These screws are designed with a hexagonal head, which allows for the use of a compatible wrench or socket for tightening. They are commonly used to attach sheet metal panels, brackets, and other parts within the appliance, ensuring that these components remain securely in place during operation.
This part fixes the following symptoms:
- Loose or wobbly parts or panels within the appliance's interior or exterior
- Panels or components falling out of place, creating gaps or exposing internal parts
- Unusual noises or rattling sounds during the appliance's operation
The GE screws can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.
Do-It-Yourself Stories from Customers like You
The control knob spun freely without engaging to select cycle Polly H. • Glen Allen , VA • November 11, 2014
I pulled off the retaining clip with pliers then removed the old knob and timer dial. I replaced all the parts with the new ones and used pliers to reinstall the clip. The teeth on the new knob engage to select the cycle.
https://www.youtube.com/watch?v=cQwLtRcHx9k
Read more
More
$7.65
- Compare At:
-
$9.10
- You Save:
-
$1.45
Genuine Ge part
By: Ge
Part Number: WB48T10011
The Oven Rack is an OEM part for GE ovens. It is designed to hold and support cookware and bakeware within the oven cavity, allowing for proper air circulation and even cooking. The rack measures about 24 inches wide by 18 inches deep.
You should replace the oven rack if it becomes damaged or worn out. Causes of a bad oven rack can include regular wear and tear, exposure to high temperatures, or physical damage such as bending or warping. A compromised oven rack can affect the stability of cookware and lead to uneven cooking results.
Symptoms of a bad oven rack include:
- Visible warping, bending, or rust on the rack
- Difficulty sliding the rack in and out of the oven
- The rack not fitting properly into the oven slots
- Unstable or wobbly support for cookware
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
I needed new oven racks because my old ones looked awful Mary K. • Walker Valley , NY • December 10, 2016
I measured my oven racks which are 24"X18" and ordered two new ones and had them within three days of my order! They are perfect!
Read more
More
$53.95
- Compare At:
-
$64.74
- You Save:
-
$10.79
Genuine Ge part
By: Ge
Part Number: WB36X192
The Oven Light Lens is an OEM part for GE ovens, designed to protect and cover the oven light bulb. It allows for a clear view of the oven's interior, making it easier to monitor the cooking progress without opening the oven door, thus maintaining a consistent temperature.
Over time, the oven light lens can become discolored or cloudy from exposure to high temperatures, grease, and food splatters, which can diminish its effectiveness. Additionally, accidental bumps or cleaning can lead to cracks or breaks in the lens.
Symptoms of a bad Oven Light Lens include:
- Diminished light output, making it hard to see inside the oven
- Cracks or damage to the lens itself
- Discoloration or cloudiness that cannot be cleaned off
- The lens becoming loose or falling off
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Oven would not heat and oven light wouldn't work Garett N. • Lubbock , TX • May 06, 2016
Tested the power to the unit by turning on the cooktop portion and saw that I had power to all of the burners. Turned the selector knob to broil and saw that the top element would heat up. I then turned off the breaker to the unit. I then decided to take out the baking element to do a continuity test. When I touched it, a 1.5 inch section fell out. Since that concluded my continuity test, I assumed I needed a baking element. After receiving the parts the NEXT DAY (amazingly great service...
Read more
More
$10.95
- Compare At:
-
$13.14
- You Save:
-
$2.19
Genuine Ge part
By: Ge
Part Number: WB48X10056
The Broiler Pan Kit is an OEM part for GE ranges. It serves as a secure platform for positioning meats, vegetables, and various foods directly beneath the broiler element, ensuring safe and efficient cooking. The pan is about 17 inches wide by 13 inches deep.
Over time, wear and tear can affect broiler pans, causing issues such as flaking or stripping of the non-stick coating and the development of small ridges or holes that permit grease to drip down.
Symptoms of bad broiler pans include:
- Grease fires caused by dripping grease contacting the heating element
- A burnt or smoky flavor transferring to foods
- Difficulty removing baked-on grease and food deposits
- Pans that are misshapen or developing small cracks
This OEM GE replacement part is also compatible with select Hotpoint, RCA, and some Kenmore ranges
Do-It-Yourself Stories from Customers like You
None Ralph W. • Brentwoo , NY • July 13, 2014
Fast delivery, great service
Read more
More
$26.95
- Compare At:
-
$32.34
- You Save:
-
$5.39
Genuine Ge part
By: Ge
Part Number: WB24T10027
The Infinite Control Switch is an OEM replacement part for GE electric ranges. It controls the heat output of the surface burners.
Causes of a faulty switch can include failures in the circuitry from extended and repetitive use over time. Exposure to liquid splatters or spills can also impact component wiring.
Symptoms of a bad infinite control switch include:
- Unresponsive or incorrectly functioning control buttons/dials
- Inability to turn on desired cooking elements
- Erratic temperature regulation and heating performance
- Repeated resetting or power intermittence issues
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Burners were overheating and could not be controlled finally one burner burned out entirely Ernest K. • Sanford , NC • June 06, 2015
Replaced the large burner control switches for the ones giving trouble. Since the other two switches
had seen as much use as the faulty ones, replaced them too. After putting in new switches, found that one large burner had burned out so replaced it also. Range now cooks as good as new
Read more
More
$100.95
- Compare At:
-
$119.12
- You Save:
-
$18.17
Genuine Ge part
By: Ge
Part Number: WB55T10067
The Oven Door Window Pack Assembly is an OEM part for GE ovens. This assembly includes the glass window and necessary components to ensure a clear view into the oven while maintaining the internal temperature and providing insulation. The glass measures 19" x 12".
Causes of a bad window pack can include thermal stress from repeated heating and cooling cycles, physical impacts causing cracks or breaks, or seal failure leading to fogging or heat loss.
Symptoms of a bad window pack assembly include:
- Visible cracks or chips in the glass
- Fogging or condensation between glass layers
- Heat escaping from the oven door
- Difficulty seeing into the oven during cooking
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Inner glass broken on stove Wayne M. • Gulfport , MS • October 19, 2014
The glass was easily replaced. Just a few screws to remove cover then remove bad glass then i dropped in the replacement glass then reinstalled cover. Ithen put the door back in the stove. 15 minute job!!! I was so surprised to see how easy it was!!! Thanks! Part fit perfectly!!!
Read more
More
$220.60
- Compare At:
-
$262.51
- You Save:
-
$41.91
Genuine Ge part
By: Ge
Part Number: WB24T10022
The Surface Element Switch is an OEM part for GE ranges and cooktops. It controls the heating of the surface elements by regulating the power level supplied to them. This switch allows you to adjust the heat intensity for precise cooking, ensuring that each dish is cooked to perfection.
Causes of a bad surface element switch can include electrical faults such as short circuits, wear and tear from frequent use, or mechanical failure within the switch mechanism.
Symptoms of a bad Surface Element Switch include:
- Burners not heating up or heating unevenly
- Burners remaining at a fixed temperature regardless of the setting
- The inability to control the heat level of the burner
- Sparking or electrical arcing from the switch area
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Burner didn't work Larry W. • Aiea , HI • March 23, 2014
Replaced the switch infin by watching the video
Read more
More
$98.95
- Compare At:
-
$116.76
- You Save:
-
$17.81
Genuine Ge part
By: Ge
Part Number: WB08T10026
The Receptacle Push-In is an OEM replacement part for GE ranges. This component securely holds the electrical receptacle/plug in place on the back of the range. Proper functioning of the receptacle push-in allows for a stable electrical connection and safe cord positioning.
Causes of a bad receptacle push-in include normal wear over time, bending/stress on the receptacle area, or damage affecting its securing ability.
Symptoms of a bad receptacle push-in are:
- Loose or wobbly electrical plug connection
- Exposed wiring or fragile cord positioning
- Tripped breakers or recurring electrical issues
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Wire connecting from strove to light fixture sparked out Joanne C. • Hudson , FL • October 30, 2015
Called Appliance Parts - service agent was extremely helpful. Tried to find an assembled piece was unable to do so. Send me the individual parts which were very easy to assemble. Was able to replace entire light assembly, reconnect wire with new terminal end. Light works find just now.
Would definitely call again if I needed assistance.
Read more
More
$7.45
- Compare At:
-
$8.36
- You Save:
-
$0.91
Genuine Ge part
By: Ge
Part Number: WH02X10002
The Screw is an OEM part for GE appliances, commonly used in washing machines, dryers, and other household appliances. This screw is designed to secure various components, ensuring they remain properly aligned and fastened during operation. Its precise design and durable construction are tailored to meet the specific requirements of GE appliances.
Over time, screws can become damaged or lost due to regular use, vibration, or during maintenance and repair activities. A missing or damaged screw can lead to loose parts, affecting the overall functionality and safety of the appliance.
Symptoms of a bad or missing screw include:
- Loose or rattling components
- Misalignment of parts
- Noise during operation
- Parts or panels not staying securely in place
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Had to replace drain hose on he washer Tom F. • Lovington , IL • January 14, 2020
Put new hose on. It was the kind that pushed in and had a flange on it with two screws.
Read more
More
$7.95
- Compare At:
-
$9.46
- You Save:
-
$1.51