Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Oven not heating evenly or convection mode not working? This rear convection element restores even baking and roasting. 20-minute DIY repair.
Whirlpool convection oven. Access to convection element from inside. Three screws to remove plate covering fan blade. Then one screw to remove element bracket. I placed tape over the holes with the wires so they wouldn’t pull back into the panel. Remove old element at tabs and replace. Very easy fix. Removing door to oven made it easier to get to but not necessary. Read more
Fix a noisy or failed blower motor causing overheating or no display power. Common DIY repair taking 15-30 minutes with rear panel access required.
Easy fix, this was an identical match to the fan that was in the oven. The only thing missing was the foam strip, that easily came off the old fan assembly and stuck to the new one. The hardest thing was finding the part, and with a picture to verify. I have found appliancepros.com has a large list of available parts,easy to find in their inventory of available items, and some of the best prices as well. This is a Whirlpool convection slide in oven, and the Whirlpool site was worthless, did... Read more
Fix "meat probe shorted" or F3 E2 error codes with this oven temperature probe jack. Restores connection for probe-cook features in wall and range ovens.
Fix rattling or noisy oven fan with this convection fan blade. Restores proper airflow for even baking temperatures. Mounts directly on motor shaft.
Replace your range's burner control knob if cracked, broken, or worn with faded markings. Installs on the control panel to operate stove burners.
The ordered part arrived the very next day. Good shopping experience and will the site again. Read more
Secures washer door handles to the outer panel. Replace if stripped, missing, or damaged to restore a tight handle fit and prevent loosening.
The plastic piece on the handle where the screw goes in to hold glass door up had broke. I ordered new handle, the retainer pieces that go over the plastic pieces to lock it all in and screws that were suggested. The screws were the wrong ones. They were way too small. I already had one screw and thankfully only had to buy 1 new one because the screw was $40 and shipping’s $10 for it AND it’s on back order right now. The old retainer ring that goes over plastic piece was a nightmare to remove... Read more
Replace your cracked, broken, or missing range control knob. This knob installs on the front control panel to adjust burner settings and oven temperature.
Replaced it with the knob purchased from Appliance Parts Pros. Read more
Intermittent power or heat damage at wire connections? This terminal block nut secures wire lugs to studs for a reliable electrical connection. Quick fix.
The oven temperature was low and the heating time excessive. However, the range display showed the requested 400F, even though the oven was really 250F. Because the oven displayed an inaccurate temperature, I ordered an oven sensor, a heating element, and a terminal block. Replacing the heating element fixed the problem. The element I received was the same shape and size, but the supports were not the same. However, I think it must have been a design change after mine was manufactured... Read more
Replacement hinge that supports and pivots your oven door. Install when hinge is broken, worn, or causing door to sag, slam, or leave gaps around the seal.
Ordered the two hinges, removed the oven door and replaced the hinges. Read more
Metal 8-32 machine thread screw for securing dishwasher brackets, panels, and internal components. Replaces missing, stripped, or corroded fasteners.
Replace your cracked, dented, or worn 30-inch oven door panel. This outer skin restores appearance and supports the handle, glass, and trim assembly.
Oven won't heat or shuts off early? This 60°C fixed thermostat controls fan operation and protects controls. Common fix when bake and broil stop working.
Following the instructions that I received through the helpful research of the APP staff, I disconnected the power, disassembled the back of the oven, and accessed the hidden element. This involved bending parts of the sheet metal and cutting the insulation, so I was very apprehensive about doing this. Once I exposed the compartment that contains the element, I had difficulty extracting the old part and was really nervous about pulling hard to extract it - until I saw the damaged element. It... Read more
Replace missing or stripped mounting screws that secure internal panels, brackets, and door frames in your oven. Restores solid alignment and rattle-free fit.
This screw was used to go into the inside frame of oven door. The screw fit perfectly. Read more
Replacement hex nut for dryer terminal blocks and electrical connections. Secures terminal components. Needed when original is stripped, missing, or damaged.
Replaced it with the video listed..Maytag Atlantis dryer was not heating. Checked all components inside dryer, thermostat, coils, etc. All check out ok ......last thing I checked was the terminal. It was burned out. Quick video on your website was awesome! THANK YOU for the service, and the ease of ordering parts. LOVE THIS SITE! Read more
Glass cooktop surface for ranges. Replaces cracked, chipped, or broken cooktops. Provides a flat cooking surface for burners. Essential repair part.
I found a video on You Tube. Was basically the same steps that I had to take. I am an electrician, so I've done similar repairs as this. Not sure if an amateur should tackle this project. Read more
Black acrylic spray paint for appliance exteriors. Restores finish on scratched, chipped, or faded surfaces. 12 oz aerosol can for panels and trim.
I purchased a can of black appliance spray paint, removed the panels on the dishwasher, sprayed them, and a few hours later put them back. They're beautiful and it looks like I have a brand new dishwasher! It now matches everything and looks great with the new granite counter tops I just installed. THANK YOU FOR THE GREAT IDEA!!! I'm a 76 year old female and my friends think I'm a genius! Read more