Kitchen Mixer Pro 600 Parts

This silver Planetary assembly is the lower drive unit of a stand mixer that carries the beater shaft. Replacing a worn or loose planetary restores smooth, consistent planetary motion and reliable attachment rotation for dependable mixing performance.

• Transfers motor power to the beater and creates true planetary mixing action
• Houses the beater shaft and interfaces with the lower gear train
• Helps maintain stable beater-to-bowl alignment at the bottom of the mixer head
• Typical failure symptoms: beater not turning or stalling, grinding/clicking from the lower head, or noticeable wobble/excess play in the planetary

• Unplug the mixer and remove the bowl and beater before service
• Drive out the roll pin to remove the old planetary; transfer and reuse any model-specific hardware
• Clean and re-grease gears with food-grade mixer grease during reassembly, if needed
• Reinstall the planetary and pin; verify beater-to-bowl clearance per the owner's manual before use

This lower gearcase housing encloses and supports the planetary and lower gear train in a stand mixer. Replacing a damaged housing restores alignment and helps contain lubrication for quieter, consistent mixing performance.

• Houses the lower gear train and planetary shaft to maintain alignment
• Provides a sealed cavity to help retain grease around gears
• Replaces cracked, stripped, or warped housings that cause wobble or noise
• Helpful when you see grease seepage or cosmetic damage to the lower case

• Unplug the mixer and remove bowl and attachments before service
• Open the motor head and remove the planetary/gear stack as required
• Transfer components to the new housing; renew food-grade mixer grease if servicing gears
• Reassemble and verify beater-to-bowl clearance and smooth operation

Restore your stand mixer's drive system with this gearcase. It serves as the transmission, routing motor power to the planetary while enclosing and supporting the gears for smooth, consistent mixing performance. What it does:

• Directs motor power through the gear train to the planetary/attachment hub
• Encloses, supports, and aligns the gears; retains transmission grease
• Helps address grinding/rumbling, grease leaking from the mixer head, weak or stalled planetary, or excessive vibration

• 1 gearcase

• Unplug the mixer; remove bowl and attachments; protect the work area from grease
• Remove the motor head cover and fasteners; separate the case and note gear stack orientation
• Transfer gears/seals as needed and repack with food-grade grease if servicing the gear train
• Reassemble, tightening screws evenly; test at low speed before normal use

Color: Blue Steel

This gearcase is the main transmission assembly that transfers motor torque to the washer's tub and agitator, restoring normal agitation and spin performance when the original gearcase fails. What it does

• Converts motor rotation into the gear reductions needed for agitation and spin cycles.
• Commonly replaced for symptoms like no agitation, slow or failed spin, grinding or clunking noises during cycles.
• Contains internal gears and bearings that can wear or break, causing irregular movement or loss of drive.
• Works with the washer's motor coupling and drive components to re-establish reliable drum motion.

• One gearcase (transmission) assembly.

• Disconnect power and water supply before beginning any repair.
• Support the washer cabinet and tub when removing the old gearcase to avoid damage or injury.
• Gearcase assemblies are heavy and contain grease—expect some lubricant exposure; clean hands and work surfaces after installation.
• Use model-specific service manual or exploded parts diagram for proper alignment and reassembly; replacement may require transfer of seals or mounting hardware.

This threaded nut is a genuine fastener used to secure appliance components and restore proper attachment. It replaces worn or missing hardware to stop loose parts and help the appliance function safely. What it does:

• Secures panels, brackets, and assemblies to prevent rattling or movement
• Restores proper thread engagement for stable mechanical connections
• Prevents components from working loose during operation
• Useful when replacing stripped or missing nuts that cause vibration or misalignment

• Disconnect power to the appliance before beginning any repair
• Match nut thread size and type to the mating bolt or stud before installation
• Tighten with the correct socket or wrench; avoid over-tightening which can strip threads
• Replace any damaged mating hardware for a secure fit

A replacement trim band that restores the finished edge around the appliance door or front frame for a clean, factory appearance. Helps protect the cabinet edge and keeps the panel aligned for smooth operation. What it does:

• Covers and finishes the door or front-frame edge to restore original appearance
• Helps hold the panel trim in place and prevents gaps or rubbing at the edge
• Reduces the chance of snags on clothing or items near the door opening
• Useful when trim is cracked, bent, or cosmetically damaged

• Disconnect power to the appliance before beginning any work
• Remove the outer panel or door trim per the service manual to access the trim band
• Replace the band carefully to avoid damaging adjacent trim or painted surfaces
• Use appropriate hand tools and follow OEM instructions

This Support (mounting bracket) secures internal components to the appliance cabinet so parts stay aligned and operate quietly. It replaces a worn or broken support to restore stable mounting and reduce noise or movement. What it does

• Holds and stabilizes panels, assemblies or internal components to maintain correct alignment
• Prevents rubbing, vibration or shifting that can cause noise or part wear
• Helps keep connected components in their intended position for reliable operation
• Commonly replaced when cracked, broken or missing after impacts or during maintenance

• One Support (mounting bracket)

• Recommended for installers or those comfortable with appliance repair; disconnect power before service
• Inspect surrounding fasteners and mating surfaces; replace any damaged screws or clips
• Use only parts and hardware specified for your model to ensure proper fit and function

The Power Cord is an OEM component specifically designed for Whirlpool stand mixers. Located at the rear base of the mixer, it safely delivers current to operate mixing attachments, speeds, and functions. 

Causes of a bad power cord include cracking or pulling at the entrance/exit points over years of use. Acute damage like punctures or burns requires replacement.

Symptoms of a faulty power cord include:

• Loose, interrupted connections when plugged in  
• Exposed or frayed internal filaments
• Tripping circuit breakers more frequently
• Buzzing, zapping, or dead mixer response

This OEM Whirlpool replacement cord ensures problem-free current transmission. Installed promptly, it prevents shock risks or fire hazards due to compromised integrity.  

Compatible also with some KitchenAid and Proctor Silex mixers, this part maintains crucial convenience and performance. Protect your valued kitchen tool with an OEM power cord replacement as needed.

This motor housing is the outer mounting and protective enclosure for the appliance motor, finished in white to match the cabinet. It provides a secure support for the motor and helps isolate noise and vibration. What it does:

• Supports and secures the motor assembly in the appliance
• Protects the motor from debris and contact with moving components
• Helps reduce motor noise and vibration through stable mounting
• Resolves symptoms like excessive vibration, rubbing noises, or misaligned motor mounting

• One motor housing (white)

• Disconnect power to the appliance before starting any repair
• Typical installation requires removing panels and either the drum or motor access components; follow OEM instructions
• Handle housing edges carefully and retain all mounting hardware for reassembly

This Onyx black finish panel restores the appliance's exterior appearance with a factory-style color-matched surface for a clean, uniform look. Ideal for replacing a worn or mismatched decorative panel. What it does:

• Provides a color-matched exterior surface to restore cosmetic appearance
• Covers scratches, chips, or discoloration on the appliance trim or door area
• Replaces a damaged or faded decorative panel without changing function
• Keeps visible surfaces consistent with the appliance's Onyx black finish

• High-level cosmetic replacement; basic hand tools may be required
• Follow OEM instructions for removal and reattachment to avoid damaging adjacent parts
• Handle with care to avoid scratching the finish during installation
• Disconnect power before servicing

This lower gearcase is the replacement gearbox that transfers motor power to the appliance's drum/rotating assembly, restoring reliable drive movement and reducing grinding or slipping during operation. What it does:

• Transfers motor rotation to the appliance's drum or rotating assembly for normal operation
• Restores proper drive engagement to stop slipping or intermittent rotation
• Eliminates grinding, scraping, or unusual drive noises when worn
• Helps prevent further wear to belts and related drive components

• One lower gearcase (onyx black) as pictured

• Disconnect power before starting and follow for disassembly/reassembly
• Installation typically requires panel removal and basic hand tools; support the drum/assembly while replacing the gearcase
• Inspect and replace worn belts, idlers, or fasteners as needed to ensure long-term operation

A white replacement bowl support that centers and stabilizes the appliance bowl or glass tray to reduce wobble and noise, helping restore smooth rotation and reliable operation. What it does:

• Centers and supports the bowl or glass tray to prevent off-center rotation and rubbing.
• Keeps the tray steady to reduce vibration and noisy operation.
• Helps the tray rotate smoothly for even heating or proper function.
• Common symptoms it can address: wobbling or off-center bowl/tray, noisy rotation, scraping or unstable tray movement.

• Disconnect power to the appliance before starting any work.
• Remove the bowl or glass tray and lift out the old support; inspect the drive hub or shaft for damage.
• Align the support over the hub/shaft and press into place until fully seated; do not force broken or warped plastic.