Kitchenaid Kdte334gps0 Parts

This support mounting bracket secures and aligns internal components to keep assemblies stable and operating smoothly. It helps prevent part movement that can cause noise, misalignment, or improper panel fit. What it does:

• Stabilizes and supports adjacent components or panels to reduce vibration and rattling
• Keeps doors or internal assemblies aligned for correct operation
• Prevents shifting that can lead to intermittent contact or wear
• Helps maintain proper spacing where a fixed mount is required

• Disconnect power or unplug the appliance before beginning work
• Handle sharp edges carefully and use the proper screwdriver or nut driver
• Reuse existing fasteners only if they are in good condition; replace stripped or damaged hardware

This is a replacement fastening nut used to secure appliance components and mounting hardware. It restores a solid connection so panels, brackets, or assemblies stay properly attached and function safely. What it does:

• Secures threaded shafts, studs, or bolts to hold parts in place
• Prevents loosening that can cause rattling, misalignment, or detached panels
• Restores proper mounting for brackets, trim pieces, and small assemblies
• Works wherever the correct threaded nut is required for a secure fit

• Turn off power to the appliance and unplug before servicing
• Hand-start threads to avoid cross-threading, then tighten with appropriate hand tool

The Outer Door Panel is an OEM part for Whirlpool dishwashers. It forms the exterior of the dishwasher door, protects internal components, and provides an aesthetic finishing touch. 

Symptoms of a bad outer door panel include:

• Scratches, cracks, or deformities affecting the appearance
• Leaks or improper sealing when the door is closed
• Blocked air flow which can impact drying performance

Causes are typically physical damage from mishandling or normal wear and tear over time. Proper installation is important to ensure correct assembly and function.

This OEM Whirlpool replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore dishwasher models.

This spacer positions and supports the appliance tank/tub assembly to maintain proper alignment and spacing for reliable operation. Replaces a worn or damaged spacer to restore correct fit and reduce movement. What it does:

• Keeps the tank/tub assembly correctly spaced and aligned with the cabinet and mounting points
• Helps prevent rubbing, binding, and excess vibration caused by a missing or damaged spacer
• Restores proper clearance to support seals and hoses that rely on correct tank positioning
• Useful when reassembling the appliance after service or repair

• One spacer

• Disconnect power and water supply before starting any repair
• Access may require removal of outer panels, console, or access covers depending on model
• Handle parts carefully to avoid damaging surrounding seals and wiring; reuse fasteners unless replacement is specified

The Drain Hose is an OEM part for Whirlpool built-in dishwashers. As the tube removes wastewater after each cycle, it plays a key part in sanitizing dishes. 

Causes of a bad Drain Hose can include mineral deposits inside over many years reducing flow. Cracks may also form from constant flexing as it transport water to the garbage disposer or sink drain.

Symptoms of a bad drain hose include:

• Puddles or pooling inside the dishwasher 
• Incomplete drainage leaving residue on dishes
• Leaks around hose connections

This genuine Whirlpool replacement is compatible with brands like Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore too. 

The Dishwasher Harness Wire is an OEM component specifically designed for Whirlpool dishwashers. This wire is responsible for connecting and carrying signals between electronic components, providing a pathway for power and communication within the dishwasher. 

Causes of a bad dishwasher harness wire can include cuts, shorts, or damage to the wiring over time. Repeated folding, bending, or crimping of the wire during installation or repairs can cause wire fatigue leading to failure. Water getting into the connections can corrode wiring.

Symptoms of a bad dishwasher harness wire include:

• Disruption of control panel and functions 
• Failure to sense cycles or inputs
• Repeated error codes
• Intermittent or lack of power to components

This Whirlpool replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Door Hinge (RH) is an OEM replacement part for Whirlpool dishwashers. This hinge is installed on the right-hand side of the dishwasher door, allowing it to open and close smoothly while maintaining the proper tension and alignment. The hinge plays a crucial role in ensuring the door seals securely during operation, preventing leaks and enabling efficient cleaning performance.

Common causes include regular use leading to wear and tear, accidental impacts, or exposure to moisture, which can contribute to rust or corrosion.

Symptoms of a bad door hinge include:

• The dishwasher door not closing completely
• Difficulty opening or closing the door
• A sagging or misaligned door
• Unusual noises when moving the door

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Insulation Shield is an OEM part for Whirlpool dishwashers. This insulation shield is responsible for reducing heat loss and noise during the dishwashing cycle. 

Causes of a damaged insulation shield can be wear and tear over time, or potential warping or cracking of the insulation material.

Symptoms of a bad insulation shield include:

• Increased noise levels during operation
• Slow or inefficient heating of water
• Higher energy costs due to heat loss
• Dishes not getting fully clean or dry

This genuine OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Pump Housing is an OEM part for Whirlpool dishwashers. As a central component, it contains the circulating pump that drives wash water through spray arms for thorough cleaning.

Symptoms of a bad pump housing include:

• Puddles or leaks from under the dishwasher main unit
• Limited or no water pressure to upper and lower spray arms  
• Water that does not properly drain at the end of a cycle
• Drying issues caused by residual water collection 

Causes can be cracks that develop from regular pump cycling stresses over time, or impact damage compromising seals and gaskets.

This OEM Whirlpool part is also compatible with some KitchenAid, Jenn-Air, and GE dishwashers.

The Seal is an OEM part for Whirlpool dishwashers. It prevents water leaks from the dishwasher door during wash cycles and water heating drainage. Properly installed seals around the door perimeter maintain water pressure inside the dishwasher tub and ensure leak-free operation. 

Causes of a bad seal can include cracks or breaks after extended use of the door opening and closing, exposure to heat and chemicals from regular dishwasher operation, or loose or improper installation.

Symptoms of a bad seal include:

• Water leaks visible around the edge of the door during wash cycles
• Puddles or drips left on the kitchen counter or floor after use   
• Difficulty closing or latching the dishwasher door securely

This OEM Whirlpool replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Track is an OEM part for Whirlpool dishwashers. It serves as the track or rail that allows the dishrack to glide smoothly in and out of the dishwasher during loading and unloading. The track is precision-engineered to provide smooth, controlled movement of the dishrack. It includes all necessary mounting brackets and attachments to facilitate simple installation.

Causes of a bad track can include scratches, dents or other damage due to impact or repeated use over time. The roller or wheel components may also become worn down or jammed, hindering proper movement.

Symptoms of a bad track include:

• The dishrack not rolling out fully or getting stuck partway
• Scratching or scraping noises when moving the dishrack
• Difficulty pushing the dishrack in and out
• The dishrack tilting or becoming unbalanced during movement

This genuine OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This dishwasher circulation pump and motor assembly drives wash water through the spray arms. Replacing a worn pump restores proper water pressure and quieter operation when cleaning performance drops or you no longer see strong spray action. What it does:

• Circulates water through the spray arms during wash and rinse cycles
• Maintains the water flow and pressure needed for effective cleaning
• Typical failure symptoms: poor cleaning, no spray action, loud hum/grind from the sump area, or the wash motor not running
• This is the main wash/circulation pump (distinct from the drain pump)

• One circulation pump and motor assembly

• Disconnect power and shut off water before servicing
• Pull the dishwasher out for bottom access; have towels or a pan ready for residual water
• Release the locking mechanism, transfer the wiring, and ensure the O-ring/gasket is fully seated before locking the new pump in place
• Restore utilities and run a short cycle to check for leaks and proper operation

This is the replacement lid for select top-load washers. It restores a secure, properly aligned cover so the lid closes and the lock/strike can engage, allowing cycles—especially spin—to run safely while helping contain splashes.

• Covers the wash basket and helps contain water splashes during operation
• Provides proper alignment for the lid lock/strike to engage
• Replaces cracked, warped, or broken lids
• May help with: lid won't close/latch and cycles that won't start or won't spin because the lid isn't closing

• Unplug the washer before servicing
• Support the lid and remove hinge screws/pins carefully to prevent damage
• Transfer existing hinge hardware and the lid strike from the old lid if your model uses them
• After installation, close the lid to verify smooth closure and lock engagement before running a cycle

The Vent is an OEM part for Whirlpool dishwashers. It is located inside the dishwasher tub and is responsible for releasing steam generated during wash cycles. The vent works to properly ventilate the tub interior by releasing hot air and steam upwards and out of the dishwasher.

Causes for a bad vent can include cracks, deterioration of vent material over many cycles, or blockages that prevent proper steam release. 

Symptoms of a bad vent include:

• Excess moisture inside the dishwasher tub 
• Reduced drying effectiveness
• Potential water leaks from the vent area
• Error codes related to moisture sensors

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models that use the same vent design.