Kitchenaid Kgra806pss02 Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: WP4455606
Right side hinge receiver for door hinge. For left side hinge receiver use WP4455605.
Do-It-Yourself Stories from Customers like You
Oven door would not close all the way so the light stayed on Scott M. • Placerville , CA • July 19, 2016
I was able to order new hinge receiver brackets for the door. The repair was not that bad. I just had to take off the lower door, take the two trim pieces off the sides and unscrew the screws holding the oven into the face of the cabinet. Then slide it out about halfway and put a step stool under the front to keep it from tipping over. Then it was just a matter of taking off everything around the sides until I could take the brackets off, put the new brackets on, and put everything back...
Read more
More
$69.42
- Compare At:
-
$82.61
- You Save:
-
$13.19
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3191898
Color: black. Small size. Measures about 2-1/2 inches in diameter.
Do-It-Yourself Stories from Customers like You
The burner cap was lost when we moved Michael W. • Cleveland , OH • October 27, 2014
We gave ApplianceParts the model# of the stove they checked their inventory they had the Burner Cap in the right color we ordered it and it arrived in three days, it was the exact replacement.
Read more
More
$55.95
- Compare At:
-
$67.14
- You Save:
-
$11.19
Genuine Whirlpool part
By: Whirlpool
Part Number: 8186589
This replacement jack mounts inside the oven cavity and provides the receptacle for the food temperature probe. It restores a dependable connection so the control can monitor internal food temperature and operate probe-cook features as intended.
- Provides the in-oven receptacle for the food/meat temperature probe
- Carries the probe's signal to the control during probe-cook cycles
- Helps resolve issues where the control does not recognize a probe or the probe feature won't run
- Replaces a jack that is damaged, corroded, or loose
What's included: Probe jack assembly Install notes:
- Disconnect power at the breaker and allow the oven to cool completely
- Access from inside the oven; remove the mounting screw(s) and carefully pull the jack to reach the wire harness
- Transfer/connect the harness and seat any gasket or insulation to maintain the oven cavity seal
- Do not overtighten fasteners; avoid pinching or damaging wires and insulation
More
$78.57
- Compare At:
-
$93.16
- You Save:
-
$14.59
Genuine Whirlpool part
By: Whirlpool
Part Number: W10810687
This blower moves air through your appliance to maintain proper cooling and ventilation. Replacing a worn or noisy blower restores airflow and helps protect internal components so the unit operates as designed. What it does
- Drives airflow through ducts or cooling channels to manage heat inside the appliance
- Helps expel heat and moisture or circulate cooling air, depending on the design
- Common symptoms of failure: fan won't run, weak/no airflow, loud rattling or squealing, burning smell, overheating or shutdown, or cooling/vent-related error messages
What's included
Install notes
- Disconnect power before servicing; allow hot surfaces to cool
- Metal edges can be sharp—wear cut-resistant gloves and eye protection
- Note wire connections and mounting orientation; transfer any brackets or seals from the original unit if required
- After installation, confirm unobstructed airflow and correct blower orientation before fully reassembly and testing
Do-It-Yourself Stories from Customers like You
Blower cooling fan had a bad bushing and was vibrating and making noise Christopher O. • Great Falls , VA • March 12, 2014
Easy fix, this was an identical match to the fan that was in the oven. The only thing missing was the foam strip, that easily came off the old fan assembly and stuck to the new one.
The hardest thing was finding the part, and with a picture to verify. I have found appliancepros.com has a large list of available parts,easy to find in their inventory of available items, and some of the best prices as well. This is a Whirlpool convection slide in oven, and the Whirlpool site was worthless, did...
Read more
More
$152.95
- Compare At:
-
$205.02
- You Save:
-
$52.07
Genuine Whirlpool part
By: Whirlpool
Part Number: WP9758829CB
This inner burner cap, in a coal matte black finish, sits on the center of the burner to shape the flame and shield the burner head—helping restore even heat and reliable ignition when the original cap is worn, chipped, or missing.
- Seats on the inner burner head to focus and distribute the flame evenly
- Protects burner ports from spills and debris that can affect flame quality
- Proper seating helps maintain correct flame color and simmer performance
- Common symptoms of a damaged/missing cap: uneven or yellow flames, delayed ignition, or flame lifting
What's included: 1 inner burner cap in coal matte black Install notes:
- Shut off gas/electric supply and allow the cooktop to cool completely
- Lift off the old cap; clean and dry the burner head surface before installing
- Center the new cap and align any locating features; ensure it sits flat and level
- Test the burner and reseat the cap if the flame is uneven
Do-It-Yourself Stories from Customers like You
Burner cap was burnt and could not be cleaned Diane B. • La Crescenta , CA • March 08, 2018
I ordered a new one
Read more
More
$47.95
- Compare At:
-
$57.06
- You Save:
-
$9.11
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8284669
6,000 BTU. Color: Coal matte black. Measures about 2 inches in diameter.
Do-It-Yourself Stories from Customers like You
Discolored burner caps and grates E G. • Warwick , MD • May 12, 2017
We have a JENN-AIR dual fuel stove. Replaced with new ones. Excellent web site. Easy to use. Excellent repair parts. Fast shipping and service. Stove looks brand new!
Read more
More
$53.95
- Compare At:
-
$64.20
- You Save:
-
$10.25
Genuine Whirlpool part
By: Whirlpool
Part Number: WP9760579
This oven door hinge restores smooth, controlled door movement and a tight seal. Replace a worn hinge to help your oven close properly, retain heat, and operate safely without slamming, sagging, or uneven gaps.
- Supports and pivots the oven door; spring tension controls opening and closing
- Helps the door sit flush against the gasket to minimize heat loss
- Restores alignment when the door feels loose, sags, or doesn't close evenly
- Resolves symptoms like door slamming, uneven gaps, poor temperature regulation, or extended preheat times
What's included: 1 oven door hinge assembly Install notes:
- Disconnect power at the breaker; shut off gas supply if applicable
- Support the door; engage hinge locks and remove the door
- Replace the hinge and securely reinstall using existing fasteners
- Rehang the door, verify latch engagement and seal, and test door movement
Do-It-Yourself Stories from Customers like You
The oven door was not closing completely and heat was escaping through the top of the door Servi E. • Tualatin , OR • January 16, 2017
Ordered the two hinges, removed the oven door and replaced the hinges.
Read more
More
$52.31
- Compare At:
-
$61.73
- You Save:
-
$9.42
Genuine Whirlpool part
By: Whirlpool
Part Number: 814229
Drawer support roller kit. Installation instructions included.
Do-It-Yourself Stories from Customers like You
Guide wheels snapped off on the under oven storage drawer Michael L. • New York , NY • April 03, 2015
Found the parts on Appliance pros (love the website navigation); ordered on a Sunday afternoon and they were delivered on Tuesday afternoon. I had the drawer repaired within 15 minutes of Fed Ex delivering the package. No tools required other than my fingers!
The original part was riveted to the drawer, these replacements are bolts with nuts and lock washers. Makes me wonder why this was not the original design. The riveted design NEVER seems to hold up to consumer use. Why do it on an...
Read more
More
$43.95
- Compare At:
-
$51.86
- You Save:
-
$7.91
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3191904
Color: Black. This large cap measures about 3 inches in diameter. For gray order WP3191905. For the small cap order WP3191898.
Do-It-Yourself Stories from Customers like You
Needed new burner caps for cosmetic appearence Noel J. • Boise , ID • March 04, 2015
Ordered burner caps from appliance parts pro good price fast delivery time great customer service easy install less than five minutes will use this parts supply company again.
Read more
More
$109.95
- Compare At:
-
$131.94
- You Save:
-
$21.99
Genuine Whirlpool part
By: Whirlpool
Part Number: WP4450038
Screw for control panel vent.
Do-It-Yourself Stories from Customers like You
The screw holding microwave oven door missing. Elizabeth B. • San Ramon , CA • June 06, 2022
Ordered the right screw and screwed it in. Door now properly secured.
Read more
More
$5.95
- Compare At:
-
$7.08
- You Save:
-
$1.13
Genuine Whirlpool part
By: Whirlpool
Part Number: WP4455981
Size: Large.
Do-It-Yourself Stories from Customers like You
A burner would not ignite electronically John B. • Buford , GA • December 01, 2018
I decided to replace the whole orifice instead of just the 'spark plug'. In doing so it became apparent that the screws would not come off easily and so I purchased a couple of those to make sure I had enough just in case. Good thing, 2 were messed up taking them out.
It was also pretty dirty after 13 years of cooking so I took the time to clean up most of the bits.
It was a difficult thing to do and took me a while to get thru all the screws in correct order to remove the part and...
Read more
More
$68.95
- Compare At:
-
$82.05
- You Save:
-
$13.10
Genuine Whirlpool part
By: Whirlpool
Part Number: WP112432
Size: 10-32 inch.
Do-It-Yourself Stories from Customers like You
Broken electrical terminal Alexander S. • Fredericksburg , VA • February 04, 2019
Replaced it with the video listed..Maytag Atlantis dryer was not heating. Checked all components inside dryer, thermostat, coils, etc. All check out ok ......last thing I checked was the terminal. It was burned out. Quick video on your website was awesome! THANK YOU for the service, and the ease of ordering parts. LOVE THIS SITE!
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP9759413
This is the 30-inch door panel for select ovens/ranges. It restores the door's appearance and provides the structural skin that supports the handle, glass, and trim for a solid, properly aligned door assembly. What it does:
- Forms the primary outer skin of the door assembly and supports handle/trim
- Provides a mounting surface for door glass and nameplate/emblems
- Helps maintain proper door alignment and a tight, rattle-free fit
- Common reasons to replace: dents, bends, scratches, discoloration, or stripped mounting holes
What's included:
Install notes:
- Disconnect power and allow the appliance to cool completely before servicing
- Remove the door assembly and place it on a protected surface; wear cut-resistant gloves
- Transfer handle, screws, glass, and trim from the old panel to the new one; note screw lengths/locations
- Align carefully and avoid overtightening to prevent damaging threads or cracking glass
More
$146.95
- Compare At:
-
$173.40
- You Save:
-
$26.45
Genuine Whirlpool part
By: Whirlpool
Part Number: WP9759944
This fixed thermostat switches near 60C to control a heat-managed circuit—often the oven's cooling/blower fan. Replacing a failed unit restores proper fan cycling and helps protect the control area from excessive heat during and after cooking.
- Monitors temperature in the oven cabinet/control area and switches power based on heat level
- Cycles the cooling/blower fan on and off to manage cabinet temperature
- Helps safeguard electronic controls from heat buildup
- Failure may cause symptoms such as a fan that won't run, a fan that runs continuously, or an unusually hot control area
What's included: 1 fixed thermostat (60C, SPST) Install notes:
- Disconnect power at the breaker before servicing
- Access the thermostat per your model; it is typically mounted to a plenum or bracket near the oven cavity
- Move wires one at a time and mount the new thermostat flat against the surface for accurate sensing
- Restore power and verify the fan cycles during operation
Do-It-Yourself Stories from Customers like You
Oven had a burnt out hidden bake element and was not heating properly Christopher A. • Auburn , AL • April 23, 2017
Following the instructions that I received through the helpful research of the APP staff, I disconnected the power, disassembled the back of the oven, and accessed the hidden element. This involved bending parts of the sheet metal and cutting the insulation, so I was very apprehensive about doing this. Once I exposed the compartment that contains the element, I had difficulty extracting the old part and was really nervous about pulling hard to extract it - until I saw the damaged element. It...
Read more
More
$84.54
- Compare At:
-
$99.76
- You Save:
-
$15.22
Genuine Whirlpool part
By: Whirlpool
Part Number: WP12990527
This hex-head sheet metal screw secures appliance panels, brackets, and trim for a tight, rattle-free fit. Replace missing or stripped fasteners to keep covers and components firmly in place and restore proper alignment.
- Fastens sheet-metal parts, brackets, and trim using a hex drive
- Replaces worn, rusted, missing, or stripped screws
- Helps reduce vibration and rattling from loose panels
- Common signs you need this fastener: head or threads stripped, screw won't tighten, panel or handle coming loose
What's included: One screw. Installation notes:
- Unplug the appliance before service; turn off water supply if working near water lines
- Use the correct nut driver or socket to avoid rounding the head
- Replace one fastener at a time to maintain alignment; do not overtighten
- Match screw type/length to the original location as specified by the manufacturer
More
$5.95
- Compare At:
-
$7.08
- You Save:
-
$1.13
Genuine Whirlpool part
By: Whirlpool
Part Number: 285006
Color: Black. Size: 12 oz. Acrylic appliance aerosol can spray paint.
Do-It-Yourself Stories from Customers like You
My 1984 dishwasher that still works great was an eyesore & I didn't match my other appliances. Dorothy L. • Raleigh , NC • March 24, 2014
I purchased a can of black appliance spray paint, removed the panels on the dishwasher, sprayed them, and a few hours later put them back. They're beautiful and it looks like I have a brand new dishwasher! It now matches everything and looks great with the new granite counter tops I just installed. THANK YOU FOR THE GREAT IDEA!!! I'm a 76 year old female and my friends think I'm a genius!
Read more
More
$42.95
- Compare At:
-
$51.11
- You Save:
-
$8.16