Kses530sps Parts

The Control-Electric is an OEM part for Whirlpool ranges. It houses the digital controls that allow users to set various cooking functions and temperatures with ease. 

Causes of a faulty control board can include liquid damage, overheating, power surges, or regular component failures over many usage cycles.

Symptoms of a bad control board include:

• Unresponsive or inaccurate buttons and dials
• Erratic or incorrect temperature readings
• Inability to ignite burners or turn on oven lights
• Blank or non-functioning display screens

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This electronic display/user interface assembly mounts behind the control panel and handles button inputs and the visual readout. Replacing a failed board restores a readable display and responsive controls so you can set and monitor functions reliably.

• Drives the control panel display and indicator lights
• Interprets keypad/touch inputs and sends commands to the appliance
• Interfaces with the main control to execute selected functions
• Typical symptoms: blank or dim display, unresponsive or erratic buttons, incorrect readouts, or UI-related error codes

• Disconnect power before servicing; use ESD protection when handling electronics
• Access through the control panel; note screw and clip locations during disassembly
• Transfer any model-specific brackets, trim, or insulators from the original part as required
• Seat wire harness connectors fully; restore power and perform any model-specific UI reset or calibration.

Electronic control board that manages your appliance's user interface, cycle selection and timing. Replacing a failed control restores responsive controls and proper cycle operation when the console is unresponsive or displays error codes. What it does:

• Receives inputs from the control panel and runs the appliance's cycle logic and timing.
• Sends commands to subsystems (motors, valves, heaters) so cycles start, stop, and progress correctly.
• Common symptoms of a failing board: unresponsive touchpad/controls, persistent error codes, cycles that won't start or stop, or erratic operation.
• Use this part when diagnostics point to the electronic control as the source of control/interface failures.

• Disconnect all power to the appliance before beginning any service to avoid electrical shock.
• Photograph or label wiring and connectors before removal to ensure correct reassembly.
• Transfer any required bezels, overlays, or harnesses from the old board.
• Handle the board carefully and avoid static discharge; verify connections and test the appliance after reassembly.

The Trim Vent is an OEM component specifically designed for Whirlpool ranges. Located at the rear of the unit above the oven cavity, the trim vent serves an important safety and ventilation purpose. 

Constructed of heat-resistant sheet metal with a powder-coated finish, the trim vent features an internal baffle system and a rear-mounted exhaust fan. This facilitates the proper drawing of hot oven air and fumes up and out of the kitchen area. 

This exhaust vent meets all codes regarding flame barrier rating and venting performance. It attaches securely to the framework at the top and back edges. 

Symptoms of a bad trim-vent include:

• Excessive heat and smoke escaping during use  
• Grease or residue buildup inside the vent pathway
• Misaligned vent body not flush or securely seated 

This OEM part fits KitchenAid, Jenn-Air, Amana and select GE range models.

This oven rack replaces a worn, bent or missing shelf inside the oven cavity so cookware sits level and slides in and out smoothly. It restores proper support for baking sheets, pans and cookware for even cooking results. What it does:

• Provides a sturdy shelf for bakeware, pans and roasting cookware
• Keeps cookware level to promote even browning and consistent results
• Replaces warped, bent or damaged racks that won't slide or stay in position
• Helps prevent cookware from tipping or sliding during use

• Install by sliding rack into the desired oven track; no tools typically required
• Allow the oven to cool completely and disconnect power before handling
• Inspect oven track rollers and guides for damage; replace those parts separately if needed
• Handle with care to avoid pinching; racks may have sharp edges

This door hinge secures and guides the active refrigerator door so it opens and closes smoothly while maintaining proper alignment. Durable replacement hinge restores correct door movement and helps prevent sagging or misalignment. What it does:

• Provides the pivot point and structural support for the active refrigerator door
• Keeps the door aligned for a proper seal and even gaps
• Commonly replaces hinges that cause door sagging, rubbing, or difficulty closing
• Works with the door assembly hardware to maintain smooth operation

• Disconnect power to the appliance and remove food/items from the door before starting.
• Support the door while removing and installing the hinge to prevent injury or damage.
• Reuse original mounting screws; tighten securely but avoid overtightening.
• After installation, check door alignment and adjust as needed for a proper seal.

This replacement control knob restores safe, reliable finger control for an appliance's front panel. It provides a secure grip to select settings and replaces worn, cracked, or missing knobs so controls operate smoothly. What it does

• Fits onto the control shaft so you can turn and select oven, range or appliance settings.
• Replaces knobs that are cracked, loose, hard to turn, or missing.
• Restores clear indicator alignment for accurate setting selection.
• Helps prevent accidental slips and improves grip when adjusting controls.

• Disconnect power to the appliance before servicing; follow manufacturer safety guidance.
• Typically installs by pulling the old knob straight off the shaft and pushing the replacement onto the shaft until seated.
• If the knob feels loose after installation, check the shaft adapter or insert for wear and replace as needed.

The Control Panel is an OEM part for Whirlpool ranges. It houses the digital controls and touchpad interface used for setting cooking functions like temperature, time, and modes.

Causes of a bad control panel can be software glitches, wear over time, exposure to moisture or impacts, and faulty electronic components internal to the panel.

Symptoms of a bad control panel include:

• Unresponsive or non-functioning touch controls
• Error codes or failure messages appearing on the display
• Loose or detachable wiring and connections
• Physical damage like cracks or missing buttons

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This oven rack provides a stable, adjustable shelf inside the oven so cookware sits securely for baking, broiling, and roasting. It restores proper oven organization and consistent airflow for even cooking. What it does:

• Supports cookware and bakeware at selectable oven heights for versatile cooking
• Replaces warped, bent, rusted, or missing racks that can cause instability
• Helps maintain proper clearance and airflow for even baking and roasting
• Slides into oven rack guides for easy repositioning as needed

• One oven rack

• Install by sliding the rack into the oven side rails until fully seated; no tools usually required
• Ensure the oven is completely cool and disconnected from power before handling
• Clean with warm, soapy water; avoid abrasive cleaners that can damage finishes
• Verify correct rack placement and secure fit before preheating the oven

The Display Board is an OEM component specifically designed for Whirlpool ranges. It is the interface that provides users control over critical range functions like temperature, timers, and cooking modes through an integrated screen and buttons.

Symptoms of a bad display board include:

• Frozen or unresponsive touch controls  
• Dimmed or flickering screen backlighting
• Inability to properly adjust temperature settings

Common causes are related to heat exposure fatiguing sensitive electronic components over time. Water intrusion from steam or spills can also damage circuitry. 

This OEM replacement display board directly replaces the original, fully restoring the range's interactive programming features. Compatible models include those from brands such as Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge and Roper. 

The Power Cord is an OEM part for Whirlpool ranges. It transmits electrical power from the home's outlet to the range, allowing it to function properly. As the power conduit, the cord is essential for powering burners, oven functions, and electronic controls. 

Symptoms of a bad power cord include:

• Range not receiving power or not powering on
• Loose, frayed, or damaged appearance of the cord
• Tripped circuit breakers related to the range circuit
• Shock or electrical hazards near the range outlet

Causes of a bad power cord can be normal wear and tear over time, accidental cuts or punctures, bending fatigue from improper storage, or damage from heat if placed too close to the range top.

This OEM replacement cord from Whirlpool ensures safe, reliable power to your range. It is compatible with select models from Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, and Admiral.

This oven temperature sensor measures internal oven temperature so the control can maintain accurate cooking heat. Replacing a failed sensor restores proper temperature regulation and consistent baking and roasting results. What it does:

• Senses oven cavity temperature and sends a signal to the control board
• Helps the oven reach and maintain set temperatures for consistent cooking
• Common symptom: oven not heating to set temperature or runs too hot/too cold
• May also cause oven error codes or cycling on and off frequently

• One oven temperature sensor probe

• Disconnect power at the breaker before removing or installing the sensor
• Handle the probe gently; avoid kinking or crushing the sensing element or damaging the connector
• Route wires and secure mounting so the sensor sits in its original position inside the oven cavity

This replacement door seal restores the fridge door's airtight closure to help maintain proper cooling and reduce energy loss. Designed to fit original-style openings, it keeps cold air in and warm air out for reliable food preservation. What it does:

• Creates an airtight seal along the refrigerator door edge to maintain consistent interior temperatures
• Helps prevent frost buildup and reduces strain on the compressor by improving efficiency
• Addresses common symptoms like warm spots near the door, excess frost, or a door that won't close snugly
• Fits into the door channel and compresses when the door is closed to form a tight barrier

• Replacement may require door removal and trim manipulation; follow your model's service instructions
• Inspect the door channel and mounting flange for damage or debris before installing the new seal
• Warm the seal slightly to ease installation and ensure a uniform fit; avoid open flames or excessive heat
• Test the door for a consistent seal after installation and make any hinge/strike adjustments if needed

The Display Board is an OEM part for Whirlpool ranges. It is responsible for controlling and displaying critical functions like time, temperature, cycle settings, and error codes. 

Causes of a bad display board can include water damage, power surges that overwhelm built-in protection, or general component failure over time. 

Symptoms of a bad display board include:

• Blank or unresponsive display 
• Inaccurate temperature readings
• Inability to set functions from the control panel
• Constant error code display

This OEM Whirlpool replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models. 

This electronic control board replaces the appliance's main control module to restore cycle selection, timing and user interface operation. It brings back reliable control functions so the unit can run selected cycles and settings. What it does:

• Houses the appliance's central circuitry to manage cycles, timers and user commands
• Processes inputs from buttons/knobs and sensors to start, stop and advance cycles
• Controls display indicators and status lights tied to cycle progress
• Addresses symptoms like unresponsive controls, erroneous cycle behavior, or displays not updating

• One electronic control board

• Disconnect power before servicing to avoid shock or damage
• Handle the board by edges and avoid static discharge (use a grounding strap when possible)
• Verify your appliance model and part number before installation; reuse original mounting hardware and connectors unless damaged