Ksm150ps Artisan Parts

This insert is a small, model-specific fitting that seats inside its assembly to align and secure the mating component. Replacing a cracked or missing insert restores a tight fit, correct positioning, and smooth operation.

• Provides the alignment/seating interface within the related assembly
• Helps the attached part fasten and sit properly
• Restores correct spacing and positioning for smooth operation
• Symptoms include a missing/broken insert, loose or wobbly component, difficulty securing or closing, or visible gap/misalignment

• Unplug the appliance and shut off water/gas before service
• Refer to your model's parts diagram for exact placement and orientation
• Transfer/reuse any original screws, clips, or fasteners as required
• Do not overtighten; confirm alignment and test operation afterward

This screw fastens appliance components to keep them aligned and quiet. Replace a stripped, corroded, or missing screw to restore a solid hold and reduce vibration.

• Secures panels, brackets, and other parts as specified in your model's parts diagram
• Maintains alignment and overall structural stability
• Helps reduce vibration, rattling, and loosening over time
• Typical replacement when the original screw is stripped, lost, corroded, or broken

• Disconnect power and shut off gas/water supplies if applicable before servicing
• Match length and thread to the original location; replace like-for-like per your diagram
• Start threads by hand to avoid cross-threading; do not overtighten, especially into plastic
• If the receiving threads are damaged, repair or replace the mating part before installation; transfer any original spacers or washers if present

This glass bowl is the clear, durable container your appliance relies on to hold ingredients securely during operation. Replace a cracked or missing bowl to restore safe mixing/processing and full visibility while you work. What it does:

• Holds ingredients and keeps them contained during mixing or processing
• Seats/locks into the base to provide a stable, secure fit
• Ensures clear visibility of contents and progress
• Common failure signs: cracks, chips, leaks, wobbling, or inability to lock in place

• 1 glass bowl

• Unplug the appliance before replacing the bowl
• Handle glass carefully; inspect for damage before use
• Align the bowl with the base and lock/seat per your model's instructions
• Avoid thermal shock: don't expose the bowl to sudden temperature changes

A replacement mixer beater that restores proper mixing and whipping action for compatible Whirlpool mixers. Replaces a worn, bent or damaged beater so batters and mixtures combine evenly. What it does:

• Spins to agitate and combine ingredients for mixing, beating and whipping
• Restores performance when original beater is bent, cracked or missing
• Helps eliminate uneven mixing and large lumps in batters or dough
• Works as a direct-fit replacement when the beater shaft and lock engage properly

• Unplug the mixer before removing or installing the beater to avoid injury
• Align the beater shaft with the mixer socket and push in until it locks or clicks
• Test on low speed to ensure proper engagement before full use
• If both beaters are worn on a dual-beater model, replace both to maintain balanced mixing

This replacement screw is a direct-fit fastener used to secure appliance panels and components, restoring proper fit and reducing movement. Ideal when original screws are stripped, missing, or damaged. What it does:

• Secures panels, trim, brackets, and other serviceable components to prevent rattling or misalignment
• Matches original fastener form for correct fit and reliable function
• Helps restore proper clearance and component alignment after repair
• Safe, general-purpose replacement for common appliance fastening needs

• Turn off power and disconnect the appliance before accessing internal components
• Use the correct screwdriver or bit; avoid overtightening to prevent thread or part damage
• Keep hardware and small parts away from children and pets

This bearing bracket assembly mounts to the appliance frame and supports a moving mechanism so it slides or pivots smoothly. Replacing a worn bracket restores proper alignment and motion, reducing friction, noise, sticking, and uneven travel.

• Provides a fixed mounting point with an integrated bearing surface for smooth movement
• Keeps the attached component aligned to prevent wobble, binding, and scraping
• Wear or damage can cause rough travel, sticking, squeaking, or sagging
• Cracks, deformation, or a loose fit are common signs the bracket needs replacement

• Disconnect power (and shut off gas, if applicable) and allow the appliance to cool before servicing
• Note the original bracket's location and orientation before removal
• Save and reuse the existing mounting screws/clips
• After installation, operate the mechanism to ensure smooth, unobstructed travel

This replacement sleeve slips over the appliance shaft to protect mating parts from wear and help restore smooth, quiet operation. It's a simple wear item that prevents metal-on-metal contact and reduces rubbing noise. What it does:

• Protects the shaft or mating surface from wear and abrasion.
• Restores proper fit between rotating parts to reduce noise and vibration.
• Helps stop squeaking, rubbing, or rough rotation that can develop with worn components.
• Extends the service life of adjoining bearings, seals, or bushings when installed correctly.

• Disconnect power and water before starting and pull the appliance away from walls.
• Access may require removing panels or the adjoining component; basic hand tools are typically needed.
• Inspect mating surfaces and replace any damaged bearings, seals, or fasteners for a lasting repair.

A 10-24 lock nut used to secure threaded fasteners and prevent loosening from vibration. Simple, durable replacement that restores proper fastening where the original nut has worn or failed. What it does:

• Secures shafts, studs, or bolts with 10-24 threads and resists loosening under normal appliance vibration.
• Restores proper tension where a stripped or loose nut causes rattling or parts shifting.
• Helps maintain alignment of panels, brackets, or components that rely on a locked fastener.
• Small hardware solution for common fastening failures—no special part modifications required.

• Disconnect appliance power and water before beginning repairs.
• Use the correct 10-24 threaded fastener and a properly sized wrench or socket to avoid rounding the nut.
• Tighten to a snug fit—do not overtighten or force onto damaged threads.
• Inspect mating threads and replace the bolt/stud if threads are stripped or damaged.

Armature for the electric motor that converts electrical energy into rotation to drive the appliance. Replacing a worn armature can restore motor drive, reduce noise, and help resolve motor-start or power issues. What it does:

• Rotor assembly that creates the rotating magnetic field to turn the motor shaft — symptoms: motor won't start or stalls under load.
• Transfers torque to the motor shaft and works with brushes and the commutator — symptoms: reduced power or weak motor performance.
• Worn or damaged armatures can cause excessive vibration, unusual noise, or visible sparking at the commutator.
• Essential for restoring normal motor operation when the armature is the root cause of motor failure.

• Disconnect power before servicing and follow all safety precautions.
• Replacement typically requires motor removal and disassembly; inspect brushes, commutator, and bearings while servicing.
• Clean and test the commutator and replace brushes if worn to prevent repeat failure.

This replacement Screw-Stat secures the appliance thermostat or temperature sensor so it stays in the correct position for reliable temperature sensing and consistent control performance. Simple, direct replacement for a lost or damaged mounting screw. What it does:

• Secures the thermostat/temperature sensor to the cabinet or mounting bracket.
• Keeps the sensor in firm contact for accurate temperature readings and stable cycling.
• Replaces stripped, missing, or damaged screws that can cause a loose sensor, intermittent temperature control, or rattling.
• Small hardware piece that supports proper operation of the temperature control system.

• Disconnect power to the appliance before accessing internal components.
• Use the proper screwdriver to avoid stripping the screw head; replace with like hardware.
• Do not overtighten—tighten just enough to secure the thermostat without distorting it.

This screw is a factory-style fastener used to secure panels and components in compatible Whirlpool appliances. It restores proper fit and function when the original screw is missing, stripped, or damaged. What it does

• Secures appliance panels, brackets, or small components to prevent rattling and maintain alignment.
• Replaces stripped, corroded, or lost screws to restore a tight, reliable connection.
• Helps eliminate vibration-related noise caused by loose fasteners.
• Fits the original mounting locations where the OEM screw was specified.

• One screw

• Use the correct screwdriver or bit to avoid stripping the head; match thread and length to the original.
• Tighten until snug—do not over-torque to prevent damage to threads or surrounding parts.
• Disconnect power to the appliance before accessing internal components for safety.