Kude70fx Ss2 Parts

This replacement wire restores an electrical connection between components to help re-establish reliable power and operation. It's a simple, direct replacement when a damaged or broken wire causes loss of function. What it does:

• Provides a proper electrical path for a specific circuit or component
• Replaces frayed, cut, or burned wiring that can cause intermittent or failed operation
• Helps prevent arcing or poor contacts when the original wire is compromised
• Used where the OEM harness or wiring needs a single-wire replacement

• One replacement wire

• Turn off power to the appliance at the breaker or unplug before servicing
• Inspect surrounding wiring and connectors; replace damaged harnesses or connectors as needed
• Use proper connectors and secure routing to avoid pinching or abrasion

This right-side track assembly guides and supports the drawer/oven glide so the drawer opens and closes smoothly. Replacing a worn or bent track restores proper alignment and prevents sticking or uneven movement. What it does:

• Guides the drawer or glide assembly along its path for smooth operation
• Maintains proper alignment to prevent binding, scraping, or uneven travel
• Replaces worn, bent, or damaged tracks that cause sticking or noisy movement
• Works with the matching left-side track and existing rollers/slides to restore function

• One right-side track assembly

• Disconnect power to the appliance before beginning any repair
• Inspect accompanying rollers, clips, and fasteners; replace if damaged
• Hand-tighten fasteners, then test the drawer glide before fully re-torquing

This thermostat bracket secures the refrigerator/freezer temperature sensor or thermostat to the cabinet, keeping the sensor in the correct position for accurate temperature control. Durable replacement for factory mounting hardware. What it does:

• Holds the thermostat/temperature sensor in place so it reads interior temperatures correctly
• Helps prevent loose or misaligned sensors that can cause irregular cooling or cycling
• Restores proper sensor positioning after damage or broken mounting clips
• Works with the thermostat assembly to maintain consistent appliance operation

• One thermostat mounting bracket

• Disconnect power to the appliance before service to avoid electrical shock
• Handle thermostat/sensor elements carefully; avoid bending or pinching the sensing tube
• Retain or reuse original fasteners unless replacement hardware is explicitly included

This left-side track assembly guides the rack so it slides smoothly in and out of the appliance, restoring proper rack alignment and stable operation. It replaces a worn or damaged track to help racks roll evenly and stay on track. What it does:

• Guides the rack along its path to ensure smooth, controlled movement
• Prevents the rack from derailing, catching, or binding during use
• Restores proper alignment when the rack tilts or shifts
• Helps eliminate grinding or scraping noises caused by a damaged track

• One left-side track assembly

• Basic hand tools may be required; disconnect power and water before servicing
• Inspect rollers, clips, and mounting points and replace any worn hardware as needed
• Reinstall carefully to ensure the track is seated and the rack rolls freely

The Diverter Motor is an OEM part for Whirlpool dishwashers controls the diverter valve, which directs water flow to various spray arms throughout the dishwasher during a wash cycle. By accurately adjusting the flow of water, the diverter motor ensures that dishes are thoroughly cleaned and rinsed by optimizing coverage and water intensity according to the cycle selected.

Causes of a bad Diverter Motor can include electrical failures, mechanical wear over time, or damage from water infiltration.  

Symptoms of a bad Diverter Motor include:

• Dishes not being cleaned properly due to insufficient water reaching all areas.
• Unusual noises coming from the dishwasher, which may indicate a struggling or stuck diverter motor.
• Error codes displayed on the dishwasher that are related to water distribution functions.
• Leakage from the dishwasher base 

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Spray Arm is an OEM replacement part for Whirlpool dishwashers. It is a component responsible for distributing water through an array of small spray openings during the cleaning cycle. The spray arm rotates and evenly disperses water and spray over the dishes.

Causes of a bad spray arm can include mineral scale buildup obstructing water flow through the spray holes, damage or cracking weakening the plastic construction, or worn bearings preventing proper rotation.

Symptoms of a bad spray arm include:

• Inadequate or uneven cleaning even on lightly soiled dishes
• Dirt and food particles left behind after washing
• Clogged or inoperable spray holes.

This OEM Whirlpool replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and some Kenmore models.

This electronic control board is the appliance's central controller. It interprets user inputs and sensor signals to power components at the right time, restoring reliable operation when the original board fails.

• Interprets user settings and manages cycle timing and temperature control
• Switches relays/outputs to run motors, heaters, valves, fans, and lights
• Interfaces with sensors and safety switches to protect the appliance
• Symptoms can include no display or response, won't start, cycles that won't advance, or erratic operation
• Logs diagnostic error codes to aid troubleshooting

• Disconnect power before servicing; follow ESD precautions and handle the board by the edges
• Access the control area, then note/photograph wiring and move connectors one at a time to the new board
• Mount securely, ensure no wires are pinched, reassemble, and restore power
• Run a diagnostic or test cycle to confirm normal operation

This electronic control board is the appliance's main brain. It manages cycles and powers key components based on sensor and user input, restoring normal operation and responsive controls when the original board fails.

• Directs the appliance's operations by processing inputs from sensors and the user interface
• Distributes power to motors, valves, heaters, fans, and other loads as needed
• Monitors system status and logs/communicates fault or error codes
• Typical failure symptoms: won't start, unresponsive controls, stops mid-cycle, intermittent power, or recurring error codes

• Disconnect power to the appliance before servicing
• Use ESD protection and handle the board by its edges
• Photograph wire/connector positions; transfer connectors one at a time to the new board
• Ensure all harnesses are fully seated and the board is secured; run a diagnostic or test cycle after installation

This connector links mating components within the appliance to create a secure, reliable connection. Replacing a cracked or loose connector helps restore consistent operation and prevent intermittent issues caused by poor contact or separation. What it does:

• Creates a stable connection between mating parts or harnesses in the appliance
• Helps prevent looseness or separation that can disrupt performance
• Direct replacement for broken, brittle, or deformed connectors
• Can resolve intermittent operation traced to a poor connection at this junction

• 1 connector

• Disconnect power and, if applicable, shut off water before servicing
• Note orientation and positions before removal to ensure correct reassembly
• Seat the connector fully until any locking features engage; do not force
• Inspect mating parts for wear or damage and replace if necessary

This is the complete upper dishrack assembly for a dishwasher. It restores secure loading and organization on the top rack so glasses, bowls, and utensils are correctly positioned for consistent spray coverage and reliable cleaning. What it does:

• Holds and organizes dishes and glassware on the top level during wash cycles
• Maintains proper spacing to help water and detergent reach all surfaces
• Addresses common issues like broken/missing tines, peeling rack coating, bent frame, or rust
• Helps prevent items from tipping or shifting due to a damaged rack

• One dishrack assembly

• Disconnect power to the dishwasher before servicing
• Open the door; remove upper rail end caps/stops and slide the old rack out
• Transfer any reusable parts from the old rack (tine rows, clips, rollers/end caps) to the new assembly as needed
• Slide the new rack into the rails, reinstall stops, and verify smooth travel

This brace connector secures a support brace inside the appliance to help keep internal panels and assemblies aligned and stable. Replacing a worn or damaged connector restores proper support and reduces noise and movement. What it does:

• Fastens and stabilizes an internal support brace or frame
• Prevents panel or assembly movement that can cause vibration or rattling
• Helps maintain proper alignment of connected components
• Replaces broken or corroded connector hardware to restore secure mounting

• One brace connector

• Disconnect power (and gas, if applicable) before starting any repair
• Access may require removing outer or control panels; save existing fasteners for reuse
• Use basic hand tools; avoid overtightening to prevent cracking plastic or bending metal
• Inspect and replace as needed

This fine screen is the small mesh filter that sits in the dishwasher sump to catch food particles and help protect the pump and wash system. It keeps debris from circulating so dishes rinse more effectively. What it does:

• Traps food and debris in the sump to prevent clogging and pump damage
• Helps maintain proper water flow for consistent wash and drain performance
• Reduces risk of food redepositing on dishes during cycles
• Commonly replaced when torn, heavily clogged, or missing

• One fine mesh sump screen

• Turn off power and disconnect the dishwasher before servicing
• Remove the lower dish rack and access the sump area to replace the screen
• Inspect surrounding seals and housing for damage while servicing
• No special tools typically required; handle mesh gently to avoid deformation