Kudr01tjbl0 Cap O Parts

This dishrack track stop fits ball-bearing style rails and prevents the rack from being pulled out too far. Replacing a worn or missing stop restores smooth rack glide and helps keep dishes secure during loading and unloading. What it does:

• Snaps into the end of the rack track to stop the rack from sliding off
• Helps maintain proper alignment and smooth movement on ball-bearing rails
• Reduces risk of the rack detaching when fully extended
• Typical symptoms: rack pulls all the way out, falls off the track, loose/rough glide, broken or missing end stop

• 1 dishrack track stop

• Disconnect power and water to the dishwasher before servicing
• Pull the rack forward, remove the old stop from the track end, and snap the new stop into place
• Make sure it fully engages the track and the rack glides and stops correctly
• If your model uses two stops, repeat on the other rail as needed

This replacement lever operates the overflow/level switch assembly to help the washer detect and respond to water level changes. It restores the mechanical action that tells the control when the tub is full. What it does:

• Moves the overflow/level switch mechanism so the machine can sense water level correctly
• Helps address overfilling, continuous filling, or erratic fill behavior caused by a worn or broken lever
• Restores reliable engagement between the float/actuator and the switch
• Works as the mechanical linkage for the overflow/level sensing assembly

• Disconnect power and turn off the water supply before beginning service.
• Access typically requires removing the cabinet or control console; keep fasteners organized.
• Install the lever so it aligns with the switch actuator and float linkage; verify smooth movement after assembly.

This pump sump screen filters lint, debris and small objects from wash water before it reaches the drain pump, helping prevent clogs and pump damage. Replace a cracked or clogged screen to restore proper draining. What it does:

• Captures lint, coins, hair and small debris before the drain pump
• Helps prevent pump blockages that cause poor draining or standing water
• Reduces wear on the drain pump by stopping larger debris
• Improves overall drain performance when the existing screen is damaged or clogged

• Disconnect power and water before accessing the pump area
• Remove the washer access panel or cabinet per your model's service instructions to reach the sump
• Inspect and clean surrounding areas and the pump inlet when replacing the screen

A small replacement retainer that secures the FlexRow assembly so the component stays aligned and stable during use. Replacing a worn or broken retainer restores proper positioning and reduces movement. What it does:

• Holds the FlexRow assembly in place to prevent shifting or sagging
• Helps maintain correct alignment for even operation
• Stops clicking, rubbing, or intermittent contact caused by a loose assembly
• Prevents additional wear on adjacent clips or mounts

• Disconnect power to the appliance before beginning any repair
• Removal usually requires releasing adjacent clips or fasteners; basic hand tools may be needed
• Inspect surrounding parts and replace any damaged clips or mounts for a secure fit

This dual positioner assembly helps align and hold the control shaft/knob mechanism so selections register correctly and controls operate smoothly. It replaces a worn or broken positioner to restore reliable selector alignment. What it does:

• Secures and centers the control shaft/knob so detents register properly
• Prevents loose or wandering knobs and helps ensure accurate cycle selection
• Commonly replaced when knobs feel sloppy, skip positions, or controls don't stay set
• Works with the control panel mounting to stabilize selector movement

• Disconnect power to the appliance before starting any work
• Remove the control panel or console to access the positioner per your model's service instructions
• Handle plastic tabs and mounting points carefully to avoid breakage during removal/installation
• Test control function after reassembly to confirm correct alignment and operation

This splash guard seal fits along the dishwasher door to help keep water inside the tub and reduce leaks and drips during cycles. It restores a tighter door seal for more reliable washing performance. What it does:

• Replaces the worn or cracked splash guard seal that lets water escape around the door
• Helps prevent puddles and water on the floor after wash cycles
• Reduces visible leaks and dripping from the bottom/front of the dishwasher door
• Restores the intended door-to-tub barrier to improve containment during operation

• One splash guard seal as shown

• Inspect the door and mounting channel for debris before installing; clean surfaces for a proper fit
• Install by seating the seal into the door/tub channel; no special tools typically required
• If the old seal is brittle or stuck, use gentle prying to remove—avoid sharp tools that can damage surrounding parts
• Disconnect power and water to the appliance before performing repairs; follow all safety guidelines

This inlet water bezel is the trim piece that fits around the washer's water inlet to provide a finished opening and support the inlet connection. It restores appearance and helps position the inlet area for a proper hose fit. What it does:

• Covers and finishes the water inlet opening on the cabinet for a clean appearance
• Helps hold and align the inlet connection and hose to reduce stress on the valve
• Prevents direct contact between the inlet hose/valve and the cabinet edge
• Commonly replaced when the inlet trim is cracked, broken, or worn

• Disconnect power and shut off the water supply before starting
• Remove the appropriate access panel or control console to reach the inlet area
• Handle the bezel carefully to avoid scratching painted surfaces during install
• Re-check inlet hose routing and tighten connections; test for leaks after restoring power/water

Color: Biscuit. Screw for lower toe panel. For black screw use WP302868, for white screw use WP3400836.

Color: White. Size: 1 qt. can. Acrylic appliance paint.

Bottle with brush. Acyrlic touch-up paint. Color: Cobalt blue. Size: 0.6 fl.oz.

Bottle with brush. Acyrlic touch-up paint. Color: Hunter green. Size: 0.6 fl.oz.

The Upper Wash Arm is an OEM component specifically designed for Whirlpool dishwashers. It is responsible for spraying water across the upper rack during the wash cycle to effectively clean dishes. It measures approximately 7.5 inches long by 1.37 inches wide.

Causes of a bad upper wash arm can include mineral or lime scale buildup that clogs the spray nozzles, or damage to the arm itself such as cracks or breaks that compromise its spraying ability.

Symptoms of a bad upper wash arm include:

• Inadequate cleaning of upper rack dishes 
• Dirty dishes after a cycle
• Clogged or blocked spray nozzles
• Visible damage or wear to the arm

This OEM replacement wash arm from Whirlpool is compatible with KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and some Kenmore models as well.