Kudro1tjbto Parts

This bimetal defrost thermostat senses evaporator temperature and controls the defrost cycle so frost is removed reliably. It replaces a failed thermostat to help restore normal cooling performance and consistent defrost operation. What it does:

• Closes and opens with evaporator temperature to allow the defrost heater to run at the correct time
• Helps prevent excessive frost buildup on the evaporator
• A faulty unit can lead to long frost accumulation, reduced cooling, or inconsistent temperatures
• Works with the defrost heater and control to maintain proper defrost cycles

• Always unplug the appliance before attempting any repairs
• Access typically requires removing the evaporator cover; protect evaporator fins and wiring during replacement
• Verify electrical continuity of the old thermostat and replace with identical part number

This display is the user interface for your range or wall oven, letting you view settings and control oven functions. A working display restores clear feedback for temperature, timers, and oven modes. What it does:

• Shows cook temperature, timers and oven mode selections
• Provides touch/press feedback for user inputs
• Helps diagnose display-related issues like blank screen, intermittent digits, or unreadable characters
• Works with the oven's control system to present status and error codes where applicable

• One display/user interface assembly

• Disconnect power at the circuit breaker before starting any repair
• Remove the oven console or control panel per the service manual to access the display
• Handle the display and ribbon connectors carefully to avoid damage from static or flexing

This PTC relay is the start device that helps the refrigerator/freezer compressor get up to speed so the cooling system runs properly. Replacing a failed relay can restore normal compressor startup and improve cooling reliability. What it does:

• Provides the initial start boost to the compressor motor so it can begin running
• Stops the compressor from repeatedly failing to start, which can prevent cooling
• Commonly linked to symptoms like the compressor clicking, running intermittently, or the appliance not cooling
• Works as the replaceable electrical start component — not a capacitor or overload protector

• Disconnect power before accessing the compressor area to avoid shock
• Verify wiring and match the relay visually and by part number before installing
• Handle gently; do not attempt to modify or repair the relay

A flat washer used with fasteners on select top-load and front-load washer assemblies to distribute load and prevent loosening. Replaces worn or missing washers to help stabilize mounting points and reduce vibration where metal parts join. What it does:

• Provides a smooth bearing surface between a bolt or nut and the mating part
• Helps distribute clamping force to prevent damage to housings or panels
• Reduces loosening from vibration or thermal cycling
• Common fix when mounting hardware is loose, rattling, or causing leaks at joins

• Inspect mating bolt, nut, and surface for wear or damage before installing
• Use correct size and orientation; do not overtighten fasteners
• Disconnect power to the appliance and follow safety procedures when accessing internal parts
• Replace all related fasteners to ensure proper fit

This rail assembly is the sliding track that lets a refrigerator drawer open and close smoothly, restoring proper drawer movement and alignment. It replaces damaged or worn drawer rails to reduce sticking and uneven operation. What it does:

• Provides a guided track for a refrigerator drawer to slide in and out
• Restores smooth, even movement when drawers are sticking or wobbling
• Keeps the drawer aligned to prevent dragging or uneven gaps
• Helps maintain proper drawer sealing and fit by correcting alignment issues

• Disconnect power or unplug the appliance and remove stored items before service
• Remove the drawer per the manufacturer's instructions to access the rail
• Use basic hand tools; align the rail carefully and secure all fasteners tight but do not overtighten

Color: White

These dishwasher cleaner tablets help dissolve and remove limescale, mineral deposits, and odor-causing residues from the tub and spray system. Use monthly or as needed to help maintain cleaning performance and a fresh-smelling interior.

• Breaks down hard-water scale and detergent film that can accumulate inside the dishwasher
• Helps reduce lingering odors caused by trapped residues
• Supports proper spray performance by cleaning internal surfaces and passages
• Helpful when you notice white film, cloudy glassware, or persistent smells

• Run with the dishwasher empty; follow the package directions for tablet placement and cycle selection
• Do not add other cleaners or detergent during the cycle
• Keep out of reach of children; avoid contact with eyes; wash hands after handling
• For heavy buildup, repeat use per label instructions

This durable silverware basket holds forks, knives and other utensils securely during dishwasher cycles so small items stay corralled and clean. Fits into the dishwasher rack to keep cutlery organized and prevent items from falling through. What it does:

• Holds and organizes silverware and small kitchen utensils during wash cycles
• Keeps utensils upright and separated for better cleaning and drying
• Prevents small items from slipping into the dishwasher spray area or drain
• Replaces cracked, broken or missing baskets that allow cutlery to scatter

• No tools required; remove the lower rack and set the basket into the designated rack slots
• Ensure basket snaps or rests securely and does not interfere with rack movement or spray arms
• Inspect basket for cracks or sharp edges before use; discontinue use if damaged
• Always follow the appliance manufacturer's safety and installation instructions

The Door Hinge (RH) is an OEM replacement part for Whirlpool dishwashers. This hinge is installed on the right-hand side of the dishwasher door, allowing it to open and close smoothly while maintaining the proper tension and alignment. The hinge plays a crucial role in ensuring the door seals securely during operation, preventing leaks and enabling efficient cleaning performance.

Common causes include regular use leading to wear and tear, accidental impacts, or exposure to moisture, which can contribute to rust or corrosion.

Symptoms of a bad door hinge include:

• The dishwasher door not closing completely
• Difficulty opening or closing the door
• A sagging or misaligned door
• Unusual noises when moving the door

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This electronic display provides the user interface for your range/oven, showing temperature, timers, and status indicators so you can monitor and control cooking functions clearly and reliably. What it does:

• Replaces a cracked, unresponsive, or blank front console display
• Restores visible time, temperature, and cycle readouts
• Helps resolve intermittent or unreadable character/symbol issues
• Works with the range/oven control assembly to show settings and alerts

• Disconnect power to the appliance before starting any work to avoid shock.
• Handle the display carefully to avoid damaging the lens or connectors.
• Verify the part number on your original console matches before installing.

This part is an electronic control board that is used on refrigerators. The purpose of this part is that it manages the cooling time, defrost time, and all other functions. Unplug the refrigerator from its power source prior to attempting to replace this part. Since the refrigerator will not be cooling during this replacement process, it's a good idea to place food in a temperature-appropriate location while this job is completed. If the electronic control board has gone bad, there may be cooling problems with the refrigerator. It is also possible that the appliance will not work at all or that it works erratically. If the unit is not making ice or defrosting, these can also be signs of a bad electronic control board.This electronic control board is a genuine OEM part that is sourced directly from the manufacturer. It is sold individually. This part is compatible with refrigerators that are manufactured by the Whirlpool, Jenn-Air, KitchenAid brands.