Lds5540s Parts

The Sump and Motor Assembly is an OEM replacement part for LG dishwashers. As a functional pumping component, it circulates water and removes debris during dish cycles.

Symptoms of a bad sump and motor assembly can include:

• Inability to properly fill or drain water from the dishwasher
• Leaks or excessive pooling of water inside the unit 
• Loud knocking or grinding noises from the motor area

Causes of failure may involve a clogged or cracked sump housing impairing flow, or wear of the motor bearings degrading power output over time.

This genuine OEM LG part is also compatible with some select Kenmore brand models.

This check valve is a one-way valve used in the refrigerator's water line. It prevents backflow to maintain pressure for the dispenser and ice maker, helping reduce drips and ensuring consistent water delivery.

• Allows water to flow in one direction only to prevent backflow
• Helps maintain line pressure for steady dispensing and proper ice fills
• May reduce post-dispense dripping at the water outlet
• Failure symptoms can include slow/sputtering dispense, dripping, or inconsistent ice fills

• Unplug the appliance and shut off the household water supply before servicing
• Dispense water to relieve pressure; place a towel to catch residual water
• Note the valve's orientation/flow direction and tubing routing before removal
• Fully seat tubing and secure connections; restore water and check for leaks

This hose connector links internal water lines inside the dishwasher and maintains a secure, leak-resistant seal for proper water flow during each cycle. Replacing a worn connector helps stop leaks and keeps cleaning performance reliable.

• Joins internal water lines/components with a tight, reliable seal
• Helps prevent drips and leaks at a hose connection point
• Supports consistent water circulation through the wash system
• Typical symptoms: puddles under the unit, moisture around the base, visible cracks/swelling at the connector, or a loose fit

• Unplug the dishwasher and turn off the water supply before servicing
• Remove the toe-kick/access panel; place a towel to catch residual water
• Note hose routing and orientation; fully seat the connector and transfer/reuse existing clamps
• After reassembly, run a short cycle and inspect all connections for leaks

This inlet hose routes fresh water into the dishwasher during the fill cycle. Replace a cracked, kinked, or leaking hose to restore proper water flow and help prevent puddles or water damage beneath the unit.

• Routes water into the dishwasher during fill
• Maintains a sealed path to help prevent leaks
• Common fix for leaks under the unit, visible cracks/kinks, or slow/no fill
• Replaces aged, brittle, swollen, or punctured tubing

• Disconnect power and shut off the water supply before servicing
• Place a towel or shallow pan to catch residual water when removing the old hose
• Note the original routing; transfer and secure existing clamps/fittings as needed
• Restore water and run a short cycle while checking all connections for leaks

This holder is a small mounting bracket that secures internal components in place, helping reduce movement and noise while keeping parts aligned for reliable operation. It's a direct-fit replacement when the original holder is broken or missing. What it does

• Secures and supports nearby components or assemblies to prevent shifting during operation
• Helps reduce vibration and rattling caused by loose parts
• Maintains proper alignment for connected parts to ensure consistent performance
• Commonly replaced when cracked, warped, or missing after impact or wear

• One holder

• Disconnect power (and water supply if appliance uses water) before servicing
• Inspect surrounding clips and screws; replace any that are damaged
• Typically installs with existing fasteners; keep orientation the same as the original

This display power control board assembly supplies and manages power for the appliance display and user interface, restoring proper display operation and control responsiveness. It replaces a failed or damaged display PCB to recover normal panel functions. What it does:

• Powers the front display and associated LEDs/buttons so the control panel lights and responds
• Converts incoming voltage and routes power to the display and related control circuitry
• Commonly used when the display is blank, flickering, shows no lights, or buttons are unresponsive
• Helps resolve intermittent display issues caused by a faulty display power board

• Disconnect power (unplug or turn off circuit breaker) before servicing to prevent shock
• Access may require removing the control panel or console
• Handle the board by its edges and avoid touching components or connector pins

This Handle Decor is an OEM part for LG dishwashers. This handle decor ensures a seamless fit and reliable performance.

A bad handle decor might occur due to wear and tear over time or accidental damage. Continuous use, exposure to moisture, or excessive force can lead to cracks, breaks, or cosmetic damage to the handle decor.

Symptoms of a faulty handle decor:

• Loose or wobbly handle
• Cracks or fractures on the handle decor
• Difficulty in opening or closing the dishwasher door

This OEM LG part is also compatible with some Kenmore models.

This refrigerator door handle provides a sturdy grip for opening and closing the fridge while restoring the appliance's appearance and usability. Designed to replace damaged, cracked, or loose handles to improve safe daily access. What it does

• Replaces a worn, cracked, or broken refrigerator door handle.
• Restores a solid, ergonomic grip for opening and closing the door.
• Eliminates looseness or wobble that can make the door hard to operate.
• Helps prevent further damage to the door front and trim caused by a failing handle.

• Remove food and any door-mounted items before beginning; support the door to prevent shifting.
• Use the manufacturer's screws and attachment method; do not overtighten fasteners.
• Follow OEM instructions for any clip or cover pieces; ensure secure engagement before use.
• If the handle is attached near electrical components (lights, dispenser), unplug the appliance or shut off power before servicing.

This sensor assembly is an electronic sensing component that provides the appliance control board with condition feedback so the unit runs correct cycles and maintains performance. Replacing a failed sensor restores reliable sensing and control. What it does:

• Detects operating conditions and sends signals to the control board for proper cycle control
• Helps the appliance maintain expected performance and cycle behavior
• Commonly linked to error codes, unexpected cycle changes, or inconsistent operation
• Prevents the control board from making incorrect decisions due to faulty readings

• Disconnect power before beginning any service to avoid shock or injury
• Handle the sensor and wiring harness carefully; avoid pulling on wires or connector pins
• Reconnect connectors fully and secure any mounting clips or fasteners