Lds6811st Parts

This refrigerator damper assembly opens and closes the air passage between the freezer and fresh food sections. Replacing a sticking or broken damper restores proper airflow and more stable temperatures, helping resolve warm spots or food freezing in the refrigerator.

• Regulates cold-air flow from the freezer into the refrigerator to maintain set temperatures
• Operates a flap within the air duct under control of the appliance's control system
• Helps reduce temperature fluctuations and improve overall cooling performance

• Disconnect power before servicing
• Access from inside the fresh food compartment; remove shelves and the damper/duct cover
• Remove mounting screws and disconnect the wire harness; transfer any foam seals or clips from the old unit if needed
• Seat the gasket evenly to prevent air leaks and route wiring away from the moving flap

The Pump Motor Assembly is an OEM component specifically designed for LG dishwashers. It houses both the wash and drain pump motors integrated within a singular assembly. 

These motors work together to efficiently circulate water through spray arms during wash cycles for optimized cleaning performance. They also help drain dirty water at the end of each cycle, ensuring dishes are thoroughly rinsed.  

Symptoms of a bad pump motor assembly include:

• Inadequate or incomplete wash and rinse performances
• Water failing to drain fully after cycles
• Leaks occurring due to ineffective pumps   
• Abnormal sounds from the motor during the operation

Causes can include normal wear over time, failures in motor electronic components, or damage from foreign debris. 

Replacing the pump motor assembly with this genuine OEM LG part restores optimized wash and rinse functions. It is also compatible with Sears/Kenmore dishwashers.

This gasket creates a watertight seal at its designated connection point in the dishwasher, helping keep wash water contained throughout the cycle. Replacing a worn seal helps stop nuisance leaks and protects nearby cabinetry and floors. What it does:

• Forms a tight, leak-resistant seal between mating dishwasher components
• Helps keep wash water inside the tub to maintain proper cleaning performance
• Wear, flattening, or tears can allow drips or pooling during/after cycles
• Common clues: visible damage, moisture at the mounting area, or water on the floor near the unit

• 1 gasket

• Disconnect power and turn off the water supply before servicing
• Access the gasket location per your model's service information; note the old seal's orientation
• Clean the channel/mating surfaces; seat the new gasket evenly without stretching or twisting
• Reassemble and run a short test cycle to check for leaks

This dishwasher sensor assembly is the turbidity (soil) sensor that monitors wash-water clarity and reports to the control. Replacing a failing sensor restores proper cycle timing and consistent cleaning performance.

• Measures the cloudiness/soil level of the wash water during cycles
• Sends feedback to the control to optimize wash, rinse, and cycle length
• Helps maintain cleaning performance and efficiency
• Failure symptoms include unusually long or short cycles, poor cleaning, or cycles that won't complete

• Disconnect power and shut off water before servicing
• Access the sensor at the sump; release the lock and twist to remove (some residual water may drain)
• Inspect/transfer the seal; seat the new sensor fully and lock in place to prevent leaks
• Reconnect wiring, restore power/water, and run a test cycle to check for leaks and proper operation

This guide assembly is the track that supports and directs a dishwasher rack as it slides in and out. Replace a worn or damaged guide to restore smooth rack movement, alignment, and reliable loading. What it does:

• Provides the sliding path that supports and guides the dishrack
• Maintains rack alignment to prevent derailment
• Helps the rack extend and retract smoothly without binding
• Common symptoms: rack hard to slide, tilts or falls off track, scraping/grinding noises, visible cracks or broken tabs on the guide

• 1 guide assembly

• Disconnect power and shut off water before servicing the dishwasher
• Pull the rack out and remove any end caps or stops to access the guide
• Release locking tabs or screws, note orientation, and swap the old guide with the new one
• Reinstall stops/end caps and test rack travel for smooth operation

This main control board manages the appliance's core electrical functions and power delivery, restoring control over cycles, display, and compressor operation when the original PCB fails. Designed as a direct-replacement control module for the appliance. What it does:

• Regulates and routes power to the appliance's motors, compressor, valves and user interface.
• Processes user inputs and runs programmed cycles so buttons, lights and displays respond correctly.
• Can stop unwanted behavior such as no power, unresponsive controls, or intermittent operation when the PCB is at fault.
• Resolve issues caused by burned traces, failed relays or damaged components on the original board.

• One main control board (power PCB assembly) as shown.

• Only install with the appliance unplugged and service power disconnected; verify mains are off before touching the board.
• Handle the PCB by its edges and avoid ESD-sensitive contact — use an anti-static strap if available.
• Connectors are fully seated and routing matches the original; secure mounting to prevent vibration.

This drain hose channels wastewater from the appliance to your home drain. Replace a cracked, kinked, or clogged hose to stop leaks and ensure water exits the unit properly during operation.

• Routes water from the appliance to the household drain or drip pan
• Maintains a clear drainage path to prevent backups and leaks
• Damage, kinks, or blockages can restrict flow and cause draining issues
• Typical symptoms: standing water, slow or no drain, leaks, or drain-related error codes

• Disconnect power and shut off the water supply before servicing
• Keep a towel or shallow pan handy to catch residual water
• Note routing and orientation; transfer any existing clamps or seals from the old hose
• Secure connections fully and run a brief test to check for leaks

This is a common fastening nut used to secure panels, trim, or components on compatible LG appliances. It provides a simple, reliable way to hold mating parts in place and restore proper fit and function. What it does

• Secures panels, brackets, or hardware to prevent movement or vibration
• Stops rattling or loose parts caused by a missing or worn nut
• Restores proper alignment when replacing damaged or stripped fasteners
• Works where a standard threaded nut is required for reassembly

• One common nut as pictured

• Disconnect power and water before servicing the appliance
• Use the properly sized wrench or socket to avoid rounding the nut
• Do not overtighten; tighten until snug and secure per OEM torque guidance
• Replace like-for-like—thread size and type match the original

This parts assembly is a pre-packaged set of components used to replace a worn or damaged group of parts in one area of the appliance. Installing the matched assembly helps restore proper fit and reliable operation.

• Replaces multiple small components as a single matched set
• Restores alignment and function in the related mechanism
• Can help with looseness, rattling, poor fit, or intermittent operation
• Built to match original form and connection points for correct fit

• Disconnect power and shut off water or gas before servicing
• Use your model's exploded view/service manual to locate and orient
• Keep track of screws, spacers, and clips; transfer any reusable hardware
• Verify smooth operation before restoring power and normal use

This protective cover shields internal appliance components from dust, debris and accidental contact, helping restore a secure enclosure and reduce exposure-related issues. Use it when the original cover is cracked, broken or missing. What it does:

• Shields wiring, sensors and small components from debris and accidental contact.
• Helps prevent damage that can occur from impacts or foreign objects.
• Reduces rattling or movement by holding components in place when properly secured.
• Common symptom: cover is cracked, warped, loose or missing, leaving parts exposed.

• Disconnect power to the appliance before beginning any service.
• Remove surrounding panels and fasteners to access the cover; use correct tools.
• Seat the cover fully and secure with the original screws or fasteners; do not force or modify the part.
• Double-check routing before reassembly.

This clamp secures hoses or wiring to the appliance chassis to prevent movement, chafing, and vibration-related wear. It helps keep connections stable so hoses and wires stay in place during normal use. What it does:

• Holds water, drain or vent hoses in position to reduce strain and prevent rubbing
• Keeps wiring harnesses routed and fastened to avoid chafing or accidental disconnection
• Reduces vibration-related noise caused by loose hoses or wires
• Helps prevent hose kinks and unintended movement that can lead to leaks or intermittent electrical issues

• One clamp

• Disconnect power to the appliance before servicing; shut off water supply if working with water lines
• Remove panels as needed to access the hose or wiring route, then replace the clamp in the same orientation
• Use appropriate pliers or a screwdriver if required; do not overtighten or deform the hose or wiring
• If the original clamp was secured with a fastener, retain and reuse it only if undamaged; replace any stripped or broken hardware

This roller assembly supports the dryer drum and lets it turn smoothly to help clothes tumble evenly. Replacing a worn roller restores proper drum rotation and reduces noise and wobble during use. What it does:

• Supports the dryer drum on a stationary shaft so the drum spins freely
• Reduces squeaking, grinding, or scraping noises from a worn roller
• Helps prevent drum wobble and uneven tumbling that can affect drying
• Restores smooth rotation for improved operation and reduced wear on other components

• One roller assembly

• Disconnect power before starting and remove the dryer back panel to access the drum rollers
• Inspect adjacent parts (belt, glides, rear bearing) and replace if worn to avoid repeat failures
• Reinstall drum and panels carefully, ensuring the roller rides squarely on the shaft and the drum is aligned
• Test spin by hand before reconnecting power and running a short cycle to confirm quiet, smooth operation

This drum roller supports the dryer drum so it spins smoothly and quietly. Replacing a worn roller restores stable drum rotation and helps reduce rubbing, scraping or thumping noises during operation. What it does:

• Supports and guides the dryer drum for even, stable rotation
• Reduces friction and drum wobble that can cause noisy operation
• Helps the drive belt track correctly and maintain proper drum alignment
• Common symptom: squeaking, thumping, or rubbing sounds and uneven spinning

• Disconnect power before starting any repair
• Remove the dryer drum or access panel to inspect and replace the roller; support the drum while removing/reinstalling
• Check other drum rollers, bearings and the drive belt for wear and replace as needed to prevent repeat failure
• Reassemble carefully and test with the dryer empty to ensure smooth, quiet rotation

This replacement holder secures internal components in place to restore proper alignment and reduce movement inside the appliance. A simple, low-cost part that helps stop rattling and maintain reliable operation. What it does:

• Provides a stable mounting point to keep parts aligned and prevent excessive movement.
• Can stop or reduce rattling, knocking, or shifting of internal components.
• Helps maintain proper component positioning for consistent performance.
• Prevents wear caused by loose or misaligned parts.

• Disconnect power (and water, if applicable) before beginning any repair.
• Access may require removing outer or access panels; keep fasteners organized.
• Inspect surrounding clips and fasteners; replace any damaged hardware for a secure fit.

This nozzle assembly directs water from the dispenser to the cup and replaces a cracked, clogged or damaged outlet. Restores clean dispensing and helps stop leaks or uneven flow from the dispenser area. What it does:

• Channels dispensed water through the refrigerator dispenser outlet for controlled flow
• Replaces broken, cracked, or worn nozzles that cause leaks or drips
• Helps clear flow issues caused by damaged or misaligned dispenser outlets
• Designed to mate with the dispenser housing and sealing features to prevent leaks

• One nozzle assembly as described

• Disconnect power and shut off the water supply before servicing
• Remove the dispenser trim/housing per your model's service instructions to access the nozzle
• Inspect and replace any damaged seals or gaskets during reassembly to ensure a watertight fit

This hinge bracket secures the appliance door to the cabinet and provides a stable pivot point for smooth opening and closing. Replaces a worn or broken bracket to restore proper door alignment and sealing. What it does:

• Supports and locates the door hinge so the door pivots correctly.
• Restores proper door alignment and helps the door close and latch securely.
• Stops sagging, uneven gaps, or scraping caused by a damaged bracket.
• Works as the mounting point for hinge pin hardware.

• One hinge bracket

• Disconnect power (and water supply if applicable) before starting any repair.
• Support the door during removal to prevent it from dropping; two-person lift may be required for heavier doors.
• Retain or reuse original hinge pins, screws, and shims unless replacements are specified.