Lfb02409lw0b Parts

This sump retainer secures the appliance sump assembly and helps keep the pump seal and surrounding components properly positioned to reduce leaks and maintain correct water flow. It's a small replacement part used during sump or pump repairs. What it does:

• Holds the sump housing or pump assembly in place to maintain a reliable seal
• Helps prevent water leaks from the pump/sump area when installed correctly
• Keeps internal components aligned for proper water circulation and drainage
• Commonly replaced when sump hardware is cracked, warped, or no longer secures the pump

• One sump retainer

• Power off and unplug the appliance before starting any repair
• Verify you have full access to the sump/pump area; removal of panels or racks may be required
• Inspect surrounding seals and gaskets; replace if damaged to ensure a watertight fit

A replacement switch mounting screw that secures control switches and switch assemblies in place for reliable operation. Replaces lost or stripped mounting hardware to restore secure panel and switch attachment on compatible appliances. What it does:

• Fastens the switch or switch bracket to the appliance frame or control panel
• Keeps electrical switch connections stable to prevent intermittent contact or movement
• Helps eliminate loose or rattling switches and noisy control panels
• Restores proper alignment of the switch for reliable user control

• Turn off power to the appliance before accessing the control panel to avoid shock
• Use the matching screwdriver size to avoid stripping the screw head
• Tighten securely but do not over-torque to prevent damage to the switch or panel
• Replace all affected fasteners for a secure fit

This bezel is a trim piece for Frigidaire dishwashers that finishes and protects an opening on the door/control panel, helping the mating component sit properly while restoring a clean, factory look.

• Frames and protects the panel opening for a control or latch component
• Helps keep the mating part aligned and seated correctly
• Covers raw edges and gaps to reduce wear and debris buildup
• Common symptoms: broken or missing trim, loose/wobbly bezel, cracked retaining tabs, cosmetic damage

• Disconnect power to the dishwasher before servicing
• Remove the control knob or latch handle to access the bezel
• Release the bezel's retaining tabs/clips and lift it out from the panel
• Align the new bezel and snap/secure it into place; reinstall any removed parts and test operation

This thermistor is the dishwasher's temperature sensor. It reports water temperature to the control so the heater and cycle timing are managed correctly, helping restore reliable wash performance and more consistent drying.

• Monitors water temperature in the tub/sump and sends readings to the control board
• Helps the control regulate heater operation and determine cycle progress/timing
• Failure can result in no heat or poor drying
• May cause unusually long/short cycles or temperature-related fault codes

• Disconnect power at the breaker and shut off the water supply before servicing
• Access is typically from the toe-kick/base area or sump; remove the lower access panel as needed
• Release the locking tab/clip, remove the sensor, and ensure the existing seal/O-ring is properly seated; install the new sensor fully to prevent leaks
• Reconnect the wire harness, restore power, and run a test cycle to check for leaks and proper heating

This factory replacement cover restores a secure, finished shield over the designated area of your appliance. It helps protect internal components and supports proper operation by replacing a cracked, missing, or loose original cover.

• Shields internal parts from dust, moisture, and accidental contact
• Helps maintain intended airflow/splatter control where designed
• Restores proper fit and appearance after damage or wear
• Typical symptoms: cracked, warped, missing, or won't stay attached

• Disconnect power and, if applicable, shut off water before servicing
• Note orientation; transfer any original screws, clips, or seals as required
• Seat tabs and align holes before tightening fasteners
• Do not overtighten to avoid damage; verify clearances before restoring power

This Shield is a protective cover used in select appliances. It helps guard nearby components and guide airflow or heat as designed, restoring proper protection when the original shield is cracked, warped, damaged, or missing.

• Acts as a barrier/deflector to protect components from heat, moisture, grease, or debris as designed for your model
• Helps maintain intended airflow, heat path, or splash control inside the appliance
• Replace if the shield is cracked, warped, burned, broken, or missing
• Symptoms can include visible damage, scorched or discolored areas near the shield, rattling/vibration, or exposed areas that were previously covered

• Disconnect power before servicing; also shut off gas
• Wear gloves—edges can be sharp on metal shields
• Reuse original screws/clips unless your model provides replacements
• Seat the shield flat and do not overtighten fasteners

This refrigerator door gasket creates a tight seal around the door to help maintain proper cooling and energy efficiency. It replaces a worn or damaged rubber seal to reduce air leaks and frost buildup. What it does:

• Seals the door perimeter to keep cold air in and warm air out
• Helps prevent frost and moisture buildup inside the compartment
• Supports consistent temperatures for food safety and performance
• Can reduce excessive run time and energy use caused by leaks

• Unplug the appliance or disconnect power before servicing
• Remove the old gasket and clean the gasket channel before installing the new seal
• Warm the gasket slightly if needed to ease installation and ensure proper fit
• After installation, allow time for the gasket to form to the door; check the seal and adjust as needed

This kickplate (toe plate) replaces the lower front trim on compatible refrigerators to restore appearance and protect the cabinet base from scuffs and drafts. Durable sheet-metal construction keeps the front edge looking clean. What it does:

• Covers and protects the refrigerator's lower front area from kicks, scuffs and dirt.
• Restores a secure trim piece when the original is bent, dented or loose.
• Helps reduce visible gaps at the cabinet base for a neater fit.
• Improves appliance appearance after damage or during refurbishment.

• Disconnect power to the appliance or follow the manufacturer's safety guidance before beginning work.
• Remove the old kickplate by loosening the retaining screws or clips; lift out and set aside.
• Align the replacement plate, engage any clips or tabs, and reinstall screws; avoid overtightening.

This small rubber sealing plug fits into a matching opening to stop leaks, block vents, or protect internal cavities from moisture and debris. It restores a sealed fit so components function reliably and stay cleaner. What it does:

• Seals unused holes or service openings to prevent water leaks and debris entry
• Protects internal wiring and components from moisture and contaminants
• Helps maintain proper airflow or pressure by closing off vents when required
• Simple replacement can stop dripping or reduce condensation-related issues

• One rubber sealing plug as pictured

• Inspect the mating hole or boss for damage and clean before installing the plug
• Press the plug firmly into place until fully seated; do not force if misaligned
• If the original opening is cracked or excessively worn, replace the affected part rather than relying on the plug alone
• Disconnect power and shut off water before accessing internal areas