Lfx25974sw101 Parts

This filter assembly head secures the refrigerator water filter and routes filtered water to the dispenser and icemaker. It restores proper filter seating and helps stop leaks or loss of water flow when the head is damaged or worn. What it does:

• Holds and seals the water filter cartridge so water passes through the filter element before dispensing
• Directs filtered water to the dispenser and icemaker plumbing
• Replaces cracked or warped housing that can cause leaks or poor filter seating
• Helps resolve intermittent water flow, leaks, or a filter that won't stay locked in place

• One filter assembly head as shown

• Turn off the refrigerator water supply and run the dispenser until flow stops to relieve pressure before removing the old head
• Inspect and lubricate O-rings with a food-safe silicone grease if reusing, or replace O-rings if damaged
• Hand-tighten the filter per manufacturer guidance; check all fittings for leaks after restoring water

A PTC thermistor assembly that senses temperature and provides the control board with accurate temperature feedback to help regulate heating and cycling. Replacing a faulty thermistor restores reliable temperature monitoring for safe, consistent operation. What it does:

• Monitors temperature and sends a signal to the appliance control so heating and cycles can be adjusted.
• Helps prevent overheating by enabling proper control of the heating system.
• Common symptoms of a failing thermistor: incorrect or inconsistent temperatures, heating that won't start or won't stop, extended cycle times, or temperature-related error codes.
• Works as the OEM-designated temperature sensing/feedback component for compatible LG units.

• Disconnect power to the appliance before starting any repair.
• Handle the assembly carefully; avoid pulling on wires or connectors—replace in the same orientation.
• May require basic hand tools and access panels.

The Door Basket is an OEM part for LG refrigerators. It is designed to provide convenient storage space directly on the refrigerator door. This basket offers an accessible solution for smaller items like condiments, eggs, or other perishables.

Causes of a bad door basket include normal wear and tear, as well as accidental impact or damage.

Symptoms of a bad door basket include:

• The basket no longer securely attaching to the refrigerator door
• Sections of the basket cracking or breaking off over time
• Loosening or inability to stay firmly in place on the door

This OEM LG part is also compatible with some Kenmore models.

This dispenser door link connects the dispenser actuator to the refrigerator dispenser door so the door opens and closes smoothly when dispensing. Replaces a worn or broken link to restore proper dispenser door movement. What it does:

• Transfers motion from the dispenser actuator to the dispenser door so the door opens when dispensing
• Keeps the dispenser door aligned for proper sealing and closure
• Can fail if the door won't open, sticks, or the dispenser lever feels loose or disconnected
• Compatible with dispenser assemblies that use a separate plastic/metal link between actuator and door

• Disconnect power to the appliance before starting any work
• Access may require removing the dispenser trim or front housing—keep fasteners organized
• Handle plastic components carefully to avoid cracking; inspect surrounding parts for wear

This Tray Cover Assembly replaces a worn or damaged cover on the appliance tray to help keep contents contained and ensure proper operation of the tray area. It's a direct-fit replacement designed for easy swap-out with the original part. What it does:

• Replaces a cracked, warped, or missing tray cover that can interfere with normal tray use
• Restores a secure, flush cover surface to prevent items from shifting or spilling
• Helps maintain correct alignment and function of the tray where the cover is used
• Reduces the chance of debris getting into the tray cavity and affecting operation

• Refer to OEM instructions for model-specific removal and installation steps
• Disconnect power and, if applicable, water before beginning any repair to avoid shock or unintended operation
• Use basic hand tools; handle plastic parts gently to avoid cracking during installation

This evaporator assembly circulates refrigerant and absorbs heat inside the freezer compartment to keep the refrigerator cool. Replacing a faulty evaporator restores proper cooling and helps prevent frost buildup and temperature issues. What it does:

• Contains the evaporator coil and housing that remove heat from the freezer air
• Enables the refrigeration cycle so the appliance reaches and holds set temperatures
• Affects frost control—worn or damaged units can lead to excessive ice buildup
• Commonly linked to symptoms like poor cooling, freezer frost, or frequent compressor runtime

• One evaporator assembly (coil and housing)

• Disconnect power to the appliance before beginning any service
• Remove interior panels and shelves to access the evaporator compartment
• Handle the assembly carefully; avoid bending fins or damaging connections

This cover assembly protects and secures the control connector area to prevent damage and ensure reliable electrical connections. It restores the original housing around the connector for safe operation and proper fit. What it does

• Covers and protects the appliance's connector area from dirt, moisture, and accidental contact
• Helps keep wiring and plug ends correctly positioned to maintain a stable electrical connection
• Reduces risk of connector damage that can cause intermittent power or control issues
• Appropriate when the original connector housing is cracked, broken, or missing

• One cover assembly for the connector housing

• Designed to snap or screw into place; follow the appliance wiring diagram and connector alignment
• Disconnect power to the appliance before attempting any repair to avoid shock or injury
• Inspect surrounding wiring and clips; replace damaged wiring or fasteners as needed

This door gasket assembly replaces a worn or damaged refrigerator door seal to help restore an airtight seal and maintain proper cooling. A properly seated gasket reduces drafts, moisture intrusion, and energy loss. What it does:

• Seals the refrigerator door to keep cold air in and warm air out.
• Helps prevent frost buildup and moisture accumulation inside the compartment.
• Reduces compressor run time and energy usage caused by a leaking seal.
• Addresses symptoms such as warm spots, visible gaps around the door, or condensation on the door edges.

• Disconnect power to the appliance and remove food from the door area before starting.
• Inspect the door flange for damage and clean the mounting surface to ensure a proper seal.
• Seat the gasket fully into the channel; some models require loosening or removing trim screws to install.
• If the door does not close evenly after installation, check hinge alignment and adjust per the OEM instructions.

This cover assembly protects and secures an electrical connector, helping keep wiring aligned and shielded from moisture and debris. It restores a clean, stable connection to support reliable appliance electrical function. What it does:

• Shields an electrical connector from dirt, moisture and rubbing that can damage wires.
• Holds the connector in place to prevent loose or intermittent electrical connections.
• Helps reduce arcing and shorting risk by keeping contacts covered and aligned.
• Resolves symptoms such as intermittent power, component failure, or non-responsive controls when caused by a damaged or missing connector cover.

• One cover assembly (connector) as shown.

• Disconnect power to the appliance before inspecting or replacing electrical parts.
• Handle wiring and the connector gently to avoid bending contacts or breaking clips.
• Installation typically requires only basic tools; fit before final reassembly.
• If corrosion or wire damage is present, repair or replace affected wiring/connectors per OEM guidance.

This replacement lever button is the user-operated push control that lets you engage the appliance's latch or control function. It restores a worn, cracked, or non-springing button so controls respond reliably. What it does

• Acts as the external push/lever used to latch, unlatch, or activate a control mechanism
• Replaces cracked, loose, or unresponsive buttons that no longer engage properly
• Helps restore normal tactile response and alignment of the control assembly
• Works with the existing actuator and mounting points — no modification required

• One replacement lever button

• High-level replacement only; remove power source before starting repair
• Handle panels and clips gently to avoid damage to trim or surrounding controls
• Verify correct button orientation before final reassembly