Lfxs297665/01 Parts

This rail guide assembly supports and guides a sliding refrigerator drawer, helping it open and close smoothly. Replace a cracked or worn guide to restore proper alignment and prevent binding or the drawer jumping off its track.

• Provides the track and support for pantry/crisper/freezer drawer movement
• Keeps the drawer aligned to reduce wobble and uneven travel
• Restores smooth open/close when the guide is cracked or worn
• Helps the drawer seat fully for a proper fit

• Unplug the refrigerator before servicing
• Remove the bin/drawer from the compartment to access the guide
• Save and reuse existing mounting hardware and spacers
• Install the new guide, align the drawer, and verify smooth travel

This refrigerator water inlet valve assembly regulates water flow from your home supply into the appliance. It restores proper filling for the ice maker and/or water dispenser and helps address leaks or no-water conditions. What it does

• Opens and closes to control water entering the refrigerator when energized
• Routes water to the ice maker and/or dispenser, depending on model design
• Common failure symptoms: no water from dispenser, ice maker not filling or making ice, slow/weak dispensing, or leaking from the rear of the unit
• Electrical/valve faults can also cause continuous dripping or overfilling

• One water inlet valve assembly

• Unplug the refrigerator and shut off the water supply before servicing
• Place a towel or pan to catch residual water when disconnecting lines
• Move tubing and wire connectors over one at a time to the new valve to maintain correct orientation
• After installation, restore water and power, then check all connections for leaks and verify proper operation

Restore organized, secure door storage. This replacement door bin/basket mounts on the refrigerator door to hold bottles, condiments, and small items so they stay contained, easy to reach, and off the main shelves. What it does

• Attaches to the refrigerator door to provide additional shelf storage
• Helps organize jars, bottles, and condiments for quick access
• Replace when cracked, warped, or with broken mounting tabs
• Symptoms include the bin falling off, not seating level, or items tipping/spilling

• One refrigerator door bin/basket

• Remove all items, then lift the old bin straight up to release from the door tabs
• Align the new bin with the mounting guides and press down until fully seated
• Verify it locks in place before loading; avoid overloading
• Handle plastic carefully; wear gloves if old parts have sharp edges

This LED light assembly illuminates the refrigerator interior when the door opens, delivering bright, efficient lighting so you can easily see items. Replace a failed module to restore proper visibility inside your fridge.

• Provides interior illumination for the fresh food or freezer compartment
• Turns on and off with the door switch
• Helps you quickly find items and check food condition
• Common symptoms: no light when doors open, flickering/strobing, dim or intermittent lighting

• Disconnect power to the refrigerator before servicing
• Remove any lens/cover, release retaining tabs, and unplug the wire harness to remove the old module
• Connect the new assembly, align tabs, and snap/secure it into place; reinstall the cover
• Restore power and verify operation; the door switch activates the light

This replacement freezer tray holds and organizes frozen items inside the freezer compartment. Restore safe, stable storage and a proper fit when the original tray is cracked, warped, or missing.

• Provides a dedicated surface to store and organize frozen items
• Fits the designated location in the freezer to maintain proper spacing
• Replace if the tray is cracked, broken, warped, or missing
• If the tray no longer seats securely or items tip over, a new tray is needed

• Disconnect power to the refrigerator before servicing
• Remove food from the area and the damaged tray
• Allow plastic parts to warm slightly to reduce the risk of cracking
• Position the new tray fully into place and ensure it sits flat and secure

The Dispenser Drip Tray is an OEM part for LG refrigerators. Positioned discreetly below the dispenser spouts, this drip tray collects any accidental overflow or spills from beverage containers.

Causes may involve cracking or deformation of plastic over extended use. Mineral scale marks or stains are also common.

Symptoms of a bad dispenser drip tray include:

• Puddles or stains around the base of the dispenser unit
• Overflow running inside the refrigerator cabinet
• Odors developing from residual liquids near warm compressor

This OEM LG part is also compatible with some Kenmore models.

This drain tube assembly channels defrost water from the evaporator to the drain pan, preventing leaks and water buildup. Replace a cracked or clogged tube to restore proper drainage and reduce puddles or ice inside your refrigerator.

• Directs defrost water from the drain outlet to the drain pan
• Helps prevent water leaks inside the fresh food or freezer compartment
• Addresses issues from a tube that is cracked, kinked, or obstructed by debris/ice
• Common symptoms: water under crisper drawers, puddles beneath the unit, or ice forming at the freezer bottom

• Unplug the refrigerator before servicing
• Access the drain outlet and remove any ice or debris from the drain path
• Fully seat the tube at both ends to ensure a secure, leak-free fit
• Test by pouring a small amount of warm water into the drain to confirm proper flow to the pan

This is a refrigerator drawer guide assembly that supports and guides a crisper/vegetable bin so it slides smoothly in and out. Replacing a worn guide restores proper drawer alignment and easy operation.

• Provides the track surface for the vegetable/crisper drawer
• Helps correct sticking, binding, or a sagging/misaligned drawer
• Can reduce scraping noises and uneven drawer movement
• Restores smooth sliding action after wear or damage

• Unplug the refrigerator before service
• Remove the affected drawer and any shelf above it for access
• Retain and transfer any screws or clips from the original guide
• Test drawer movement and alignment before closing up

This tray cover assembly is the shelf cover that sits above a storage bin inside your refrigerator. It restores a flat, stable surface for food and proper support for the drawer area when the original is cracked, warped, or missing. What it does:

• Forms the shelf surface over a drawer/crisper and supports stored items
• Provides structure for the drawer area so bins slide and seat correctly
• Helps maintain proper airflow across the drawer compartment
• Common signs of failure: cracked or sagging frame, broken tabs, drawers binding or not closing smoothly

• 1 tray cover assembly

• Unplug the refrigerator and clear the shelf area before starting
• Remove the affected drawer(s) and any inserts from the old cover
• Position the new cover on the cabinet supports and ensure tabs/rails are fully seated
• Reinstall drawers and check for level, smooth operation

This replacement gasket seals the Home Bar (door-in-door) access panel on your refrigerator. A fresh, flexible seal stops warm-air leaks that cause condensation, frost, and temperature fluctuations, helping the unit run efficiently and keep food cold.

• Forms an airtight seal around the Home Bar/door-in-door panel
• Helps maintain proper interior temperature and humidity
• Common symptoms: visible gaps, torn or warped gasket, condensation or frost near the panel, door not closing flush
• Restores reliable closing and reduces unwanted airflow

• Disconnect power before servicing
• Open the Home Bar panel, pull the old gasket from the channel, then align and press the new gasket fully into the groove—seat corners first
• Warm the gasket (hair dryer on low or soak in warm water) to relax folds; do not overheat
• Close and check for an even seal; adjust by massaging the gasket into place as needed

This center hinge assembly supports the refrigerator door at the mid-hinge position and allows smooth, reliable pivoting. Replacing a worn hinge restores proper alignment so the door closes and seals as designed.

• Provides the pivot point at the center hinge location
• Supports door weight to maintain alignment and clearance
• Helps ensure even gasket contact for an effective seal
• Common symptoms: door sagging or rubbing, squeaking at the hinge, difficulty closing, visible play or damage at the hinge pin

• Unplug the appliance and remove items from the door to reduce weight
• Support the door while removing the center hinge fasteners
• Note and transfer any spacers/washers in the same order and orientation
• After installation, align the door and verify the gasket seals evenly

Replacement door basket that restores convenient storage on the appliance door, keeping bottles and small items secure and accessible. Replaces damaged or missing door bins to help keep your appliance door organized and usable. What it does:

• Provides a secure shelf on the appliance door for bottles, condiments and small containers.
• Replaces cracked, chipped or broken door bins that no longer hold items safely.
• Restores lost or reduced door storage capacity for easier organization.
• Helps prevent items from falling out of the door during normal use.

• Disconnect power (unplug or switch off) and remove all items from the door before starting.
• Most installations are hand-operated: lift or tilt the old bin out of the door track, then seat the replacement into the same track—do not force.
• Inspect mounting clips or supports during replacement; damaged clips must be replaced separately.

The Defrost Heater is an OEM part for LG French door refrigerators. It is an electrical heating element located inside the fridge compartment or freezer that automatically activates to melt frost and ice buildup during defrost cycles. Subject to temperatures cycling between warm and cold, the heater coil must withstand expansion stresses. 

Symptoms of a bad defrost heater include:

• Accumulating frost that decreases available storage space over time  
• Extended defrost periods not fully melting all accumulated ice
• Buzzing or clicking coming from the refrigerator compartment 

Causes can be cracks in the heater coil's insulation allowing moisture to penetrate over many years of use. Replace with this new OEM LG defrost heater to ensure automatic removal of frost for fresher food storage. It is also compatible with Sears/Kenmore French door models.

This Front Cover Assembly is the outer panel that protects internal components and restores the appliance's appearance. It replaces a damaged or worn front cover to help maintain safe operation and a clean finish. What it does:

• Covers and protects control components, wiring, and internal mechanisms from dust and debris
• Restores cosmetic appearance when the original cover is cracked, dented, or discolored
• Helps ensure proper alignment and fit of adjacent trim and door components
• Reduces risk of foreign objects entering the appliance through the front opening

• Disconnect power (and water, if applicable) before beginning any repair
• Handle edges carefully; use gloves to avoid cuts or damage to the finish
• May require removal of trim, bezel, or adjacent panels
• Verify fit and part number against your appliance before installation

This grille assembly is the outer fan cover that protects the dryer fan and helps direct airflow. It replaces a damaged or cracked grille to restore proper airflow clearance and prevent debris from contacting the fan. What it does:

• Covers and protects the blower/fan area from loose items and lint
• Helps maintain correct airflow path for efficient drying and venting
• Reduces rattling or vibration caused by a cracked or loose grille
• Prevents small objects from entering the fan housing and causing damage

• One grille assembly (fan) as shown

• Installation requires access to the dryer's front or rear panel depending on model
• Unplug the appliance and shut off gas before starting work
• Inspect surrounding trim and fasteners; replace any broken clips or screws for a secure fit

This shelf assembly replaces a cracked, chipped, or sagging glass shelf to restore stable storage and organization inside the refrigerator. It provides a solid, easy-to-clean surface for food and containers. What it does:

• Supports refrigerated food, containers and produce to maximize usable shelf space
• Restores a level, stable surface when an existing shelf is damaged or warped
• Helps prevent spills by providing a full, even glass surface
• Matches OEM fit and sits into existing shelf supports to maintain original layout

• Remove all items from the shelf and surrounding area before installation
• Slide the old shelf out of its supports and carefully lift the replacement into place; support glass to avoid dropping
• Use caution handling glass; wear gloves to prevent cuts
• If shelf does not seat easily, check support rails for obstructions or damage;