Lmhm2237st Lhm2016st Parts

This thermostat is a temperature-sensitive safety switch for select LG microwaves. It monitors heat at its mounting point and interrupts power when overheating is detected, helping protect internal components and restore operation once temperatures return to normal.

• Monitors temperature at its mounting location inside the microwave
• Opens the circuit to interrupt power when temperatures exceed its rating
• Helps prevent heat-related damage to internal components
• Failure symptoms include mid-cycle shutoff, no heat or no start after an overheat event, or abnormal vent/cooling fan operation

• Disconnect power at the outlet or breaker before servicing
• Microwaves contain a high-voltage capacitor; discharge it properly before touching internal parts
• Note wire positions and transfer one lead at a time; mount the thermostat firmly for accurate heat sensing
• Inspect and replace any burnt connectors; ensure clean contact with the mounting surface

This microwave grease filter captures grease and cooking residue from the exhaust air to help protect the blower and maintain airflow. Replace when the filter is saturated, damaged, or no longer cleans up adequately.

• Traps grease and particulates from cooktop vapors to keep the vent path cleaner
• Helps maintain ventilation performance and reduce lingering smoke and odors
• Replace if the mesh/frame is torn, warped, missing, or remains greasy after washing
• Symptoms of a clogged filter can include weak airflow and grease buildup under the microwave

• Disconnect power at the plug or breaker and let surfaces cool; wear gloves—filter edges can be sharp
• Access the filter from the underside; release the retaining tab or screw and slide the old filter out
• Insert the new filter into the tabs, secure the latch/screw, and ensure it sits flat and locked
• Restore power and test the vent fan for proper airflow

This thermostat is a temperature-sensitive safety switch used in LG microwaves. It monitors internal temperature and opens the circuit when overheating is detected to help protect components from heat damage.

• Monitors temperature at its mounting location inside the microwave
• Opens on overtemperature to interrupt power for safety
• Depending on model/location, a failed or open thermostat can cause no heat, the unit shutting off mid-cycle, or no power until it cools
• Helps prevent damage to the magnetron, cavity, and wiring due to overheating

• Unplug the microwave before service; the high-voltage capacitor can retain a dangerous charge
• Note wire positions, remove mounting screws, and install the new thermostat flat against the surface for proper heat sensing
• Reassemble and test; ensure vents and filters are clear to maintain proper airflow and prevent future overheating

This replacement screw secures specified panels or components inside your appliance. Refreshing worn or missing hardware helps restore a tight fit, reduce rattling, and keep assemblies properly aligned for reliable performance.

• Provides secure fastening for brackets, panels, or internal assemblies
• Replaces stripped, rusted, or lost hardware
• Helps reduce vibration and rattling noises
• Symptoms include loose panels, shifting components, or a screw that won't tighten

• Disconnect power and allow any hot surfaces to cool before servicing
• Wear cut-resistant gloves and eye protection
• Match length and thread to the original; replace like-for-like
• Start threads by hand to avoid cross-threading; do not overtighten

This ventilation fan motor drives the appliance's vent/cooling fan to move air through the cabinet. Replacing a failed motor restores proper airflow to prevent overheating, reduce odors, and return normal vent performance.

• Spins the ventilation fan to exhaust or circulate air as designed
• Helps protect controls and internal components by moving heat away
• Common symptoms: fan won't run, runs slowly, or makes loud humming/squealing/rattling noises
• May cause hot control areas, weak venting, or thermal shutdowns if failing

• Disconnect power at the breaker and allow the unit to cool before servicing
• Remove the necessary rear/top/cover panels to access the motor per your model
• Label and photograph wire connections; note shaft and rotation orientation
• Transfer the existing fan blade and mounting hardware; verify free spin before restoring power and testing

Replacement refrigerator shelf that restores usable storage space and support for food and containers. Helps keep items organized, prevents spills, and returns a stable surface after a cracked, chipped, or missing shelf. What it does:

• Provides a flat, supportive surface for storing food, containers and small appliances
• Replaces cracked, chipped or missing shelving to restore usable interior space
• Helps reduce spills and keeps items from shifting when the door is opened or closed
• Seats into the refrigerator's existing shelf supports to re-establish stable storage

• Remove the old shelf per your owner's manual by lifting or sliding it out of the shelf supports
• Handle carefully; wear cut-resistant gloves if replacing a cracked or broken glass shelf
• Place the replacement shelf into the same supports—do not force or bend the shelf

This Nut Assembly is a threaded fastener used to securely hold an associated component inside the microwave. Replacing a worn, stripped, or missing nut helps reduce vibration, eliminates rattling, and keeps parts properly aligned during operation.

• Provides a secure threaded anchor point for the matching screw/bolt
• Helps maintain alignment and prevent vibration or rattling
• Replaces stripped, cracked, or missing hardware
• Addresses symptoms like loose or shifting components and recurring rattling noises

• Disconnect power; if built-in, switch off the circuit breaker
• Access the mounting location, remove damaged hardware, and install the new nut assembly
• Avoid overtightening to prevent damage to threads or surrounding material

A high-voltage capacitor for the appliance's high-voltage circuit that stores and releases electrical energy to support proper heating operation. Replacing a failing capacitor can restore consistent heating and prevent related electrical faults. What it does:

• Stores and delivers high-voltage energy used by the magnetron/ high-voltage assembly to generate heat.
• Failure may cause no-heat or weak-heat conditions in the oven.
• Faulty capacitors can contribute to arcing, loud humming, or blown high-voltage fuses.
• Works as part of the HV circuit; not a user-serviceable low-voltage control.

• High-voltage components can hold a dangerous charge—disconnect power and discharge the capacitor before servicing.
• Use insulated tools and avoid touching terminals; verify proper operation with appropriate test equipment.

The TEMPLATE is an OEM part for LG microwaves. It is the outer casing and control panel covering that defines the microwave's design and aesthetics.  

The causes of a bad template can include cracks, dents, or damage to the outer surface from impacts or normal wear over time. Heat and humidity fluctuations can also cause template materials to degrade.

Symptoms of a bad template include:

• Cracks or breaks in the template material
• Loose, misaligned, or damaged control panel or display  
• Yellowing, warping, or discoloration of plastics
• Openings or gaps that compromise the microwave structure

This genuine OEM LG replacement part restores the microwave's appearance and protects internal components. It is also compatible with some Kenmore and Sears microwaves
 

This replacement holder secures the appliance door latch assembly, restoring proper catch and alignment for reliable closing. It helps maintain safe door engagement and prevents the door from popping open during use. What it does

• Secures the door latch keeper so the latch can engage and hold the door closed
• Restores proper door alignment and reduces door rattle or incomplete latching
• Addresses symptoms such as a door that won't stay closed or that pops open during operation
• Works as the mounting/retaining piece for the latch assembly in the door frame

• One holder locker part

• Basic hand tools are typically required; follow the appliance service manual for disassembly steps
• Disconnect power (and gas if applicable) before servicing to avoid injury
• Inspect the latch and strike for wear when replacing this part; replace any damaged components

The Display Power Control Board Assembly is an OEM replacement part for LG microwave ovens. It serves as the critical component that controls and regulates the various functions, settings, and power levels of the microwave.

Symptoms of a need to replace the display power control board assembly include:

• The microwave not turning on or failing to respond to user inputs
• Issues with the display, such as flickering, blank screens, or incorrect information
• Specific cooking modes or functions not working as intended
• Error codes or warning indicators related to control board malfunctions

Causes of a bad display power control board can include electrical faults, power surges, component failures due to age or overheating, or physical damage from impact or moisture exposure.

This OEM LG part is also compatible with select Sears/Kenmore microwave oven models.

The Transformer is an OEM part for LG microwaves. It is responsible for stepping down high voltage current from the wall outlet to safe low voltage used by the microwave's electronic control system. Located inside the microwave cabinet beneath the turntable mechanism, the transformer supplies precise power to crucial components including the magnetron, control console, and touch controls.

Causes of a transformer failing include stresses from constant heating and electromagnetic flux over many years, damage from water damage, or manufacturing defects.  

Symptoms of a bad transformer include:

• Microwave failing to heat or function 
• Faulty or unresponsive control panel and display
• Buzzing or humming noises emanating from inside

This genuine LG replacement ensures all electronic systems receive stabilized power safely. Compatible with Sears/Kenmore branded microwaves using LG components.

This supporter motor is the mounting support assembly that holds and stabilizes the appliance motor, helping maintain proper alignment and reduce vibration for reliable operation. It restores secure motor positioning after wear or damage. What it does

• Supports and secures the motor housing to prevent movement during operation
• Reduces excessive vibration and noise caused by a loose or worn motor mount
• Helps keep the motor aligned so the drivetrain and drum/tumbler run smoothly
• Used when visual damage or cracking is present on the motor support

• Disconnect power (and gas if applicable) before beginning any repair
• Access may require removing the appliance rear or front panel and supporting the motor/drum while swapping the part
• Verify mounting orientation and fastener locations match removed part; retain any grommets or isolators if present
• If wiring is attached, note connector positions before disconnecting.

This power control board assembly replaces the refrigerator's main power/logic PCB to restore regulated power and control to components. It helps return control functions so the appliance can run normally when the original board has failed. What it does:

• Regulates and distributes power to compressor, fans, defrost heater and user interface
• Manages control signals for cooling cycles and timed defrosts
• Supports the display and touch/selector inputs so controls respond correctly
• Can resolve symptoms such as no display or lights, compressor not running, intermittent operation or unit not cooling when caused by a failed board

• Disconnect power to the appliance before beginning work to avoid shock or damage
• Handle the board carefully and avoid electrostatic discharge; ground yourself before touching connectors
• Verify the part number on the old board matches EBR77659110, then transfer any mounting hardware or brackets as needed

This lamp cover is the clear interior lens that protects and diffuses the appliance light, restoring even illumination and shielding the bulb from spills and debris. It's a direct-fit replacement designed to match the original lens shape. What it does:

• Protects the interior light bulb from food, grease, and impact
• Diffuses and directs light for even interior illumination
• Replaces cracked, discolored, or missing lamp lenses
• Helps prevent direct contact with the bulb for safer operation

• One lamp cover (lens) as shown

• Disconnect power before servicing to avoid electrical shock
• Handle the lens carefully—it may be glass or brittle plastic and can break if dropped
• Remove mounting screws or clips that secure the old lens, lift out, and install the replacement in the same orientation
• Test the light after reassembly; do not operate if mounting is damaged or the lens is not secured

This cooling fan motor spins the internal fan that moves air through the appliance to dissipate heat and protect sensitive components. Replacing a noisy, weak, or seized motor restores proper airflow and dependable operation.

• Drives the cooling fan to circulate cooling air within the cabinet
• Helps prevent overheating and thermal shutdowns of internal parts
• Restores airflow when the original motor is worn, noisy, or not turning
• Typical signs include no fan movement, unusual humming/squealing, reduced airflow, or the unit shutting off from heat

• Disconnect power (and gas, if applicable) before servicing; allow the appliance to cool completely
• Access the motor by removing the appropriate rear/top or control-panel cover for your model
• Note wire orientation; transfer the fan blade and any mounting parts from the original motor if required
• After installation, ensure the fan spins freely and verify proper airflow and quiet operation