Lmv2301ss Parts

This bottom plate is the interior panel that covers and protects the oven or microwave floor, giving a clean cooking surface and shielding internal components from spills and debris. It helps maintain safe, reliable operation. What it does:

• Covers the appliance interior floor to catch drips and crumbs and keep them away from heating and mechanical parts
• Protects underlying components from corrosion and food damage
• Helps maintain even heat distribution by providing a stable cooking surface
• Worn, bent or missing plates can cause excessive debris buildup, odors, or contact with moving parts

• Disconnect power (unplug or switch off breaker) and allow the appliance to cool before starting
• Handle carefully—edges may be sharp; wear gloves if needed
• Install with existing factory screws or clips; do not force or bend the plate
• If other parts are damaged or missing, replace them per the manufacturer's instructions

Replace a damaged or dented refrigerator door with this complete door assembly to restore proper door operation, appearance, and sealing. The full assembly makes replacing a bent or broken door faster and keeps internal components correctly aligned. What it does:

• Replaces the entire refrigerator door so the unit can close and seal correctly
• Restores mounting points for handles, bins, and trim to secure storage and use
• Helps stop cold-air leaks and reduces frost or cooling issues caused by damaged doors
• Improves exterior appearance when the original door is dented, cracked, or warped

• One complete door assembly

• Disconnect power to the appliance before beginning any repair
• Door assemblies are heavy and may require two people to lift and align safely
• Keep all original fasteners and verify hinge orientation during reassembly
• If the assembly includes wiring for lights or sensors, reconnect and test electrical connections before restoring power fully

This Door Handle replaces a cracked, loose, or worn handle on your microwave, restoring a secure grip and clean look. Swap it to bring back smooth, safe door operation and the original appearance of your appliance.

• Provides a solid handhold to open and close the door
• Helps keep daily door operation safe and convenient
• Typical failure signs: cracked/broken handle, loose or wobbly mounting, scuffed or peeling finish
• Restores proper feel when opening the door

• Disconnect power at the breaker or unplug the appliance before servicing
• Support the door and keep track of screw locations during removal
• Reuse original mounting hardware and spacers; do not overtighten screws
• After installation, verify the door opens and closes smoothly

This turntable shaft (MH-8) connects the microwave's turntable motor to the glass tray hub so the tray spins for even heating. Replace it when the tray won't rotate, slips intermittently, or makes grinding/clicking noises.

• Couples the turntable motor to the tray hub to drive rotation
• Helps ensure even cooking and defrosting by keeping the tray moving
• Typical symptoms: tray not turning, intermittent/jerky rotation, grinding or clicking from the cavity floor
• Damage indicators: cracks, melted/rounded drive surfaces, or excessive wobble

• Disconnect power to the microwave at the plug or breaker before servicing
• Remove the glass tray and roller ring to access the shaft
• Lift the old shaft straight up; if stuck, access the turntable motor from below to push it out
• Align and press the new shaft fully onto the motor spindle; reassemble and test rotation

This is the turntable assembly for the microwave's rotating tray system. It provides a stable, smooth-rotating surface so dishes stay level and heat evenly, replacing a damaged, wobbly, or missing turntable to restore consistent cooking performance. What it does:

• Forms the rotating surface that supports dishes for uniform heating
• Keeps the tray centered and aligned with the drive hub/guide for smooth motion
• Replace if the tray is cracked, chipped, or missing
• Replace if the tray rocks, binds, or skips while turning
• Helps address uneven heating caused by poor or inconsistent rotation

• 1 turntable assembly

• Unplug the microwave or switch off power at the breaker before servicing
• Remove the existing turntable parts and clean the track/hub area
• Set the new assembly so it sits flat and engages the drive hub; verify smooth, unobstructed rotation
• Do not operate the microwave without the turntable properly installed

Replacement door handle that restores a secure, comfortable grip and original appearance to your refrigerator door. Matches the factory fit and finish for a straightforward swap without replacing the full door. What it does:

• Provides a sturdy, ergonomic grip for opening and closing the refrigerator door
• Replaces cracked, loose, broken, or cosmetically damaged handles
• Restores the original look and helps maintain normal door operation
• Intended to use with the refrigerator's factory mounting locations and fasteners

• Use basic hand tools; remove any trim or access panels to reach the handle fasteners
• Support the door while removing/installing the handle to avoid damage or misalignment
• Retain and reuse original screws/fasteners unless new hardware is explicitly supplied
• Refer to your model's service manual for step-by-step instructions and follow all safety precautions

This is a motor start/run capacitor that helps the appliance's motor start and run smoothly by supplying a brief boost of electrical energy. Replacing a failing capacitor restores reliable motor startup and operation. What it does:

• Provides the brief electrical surge needed to start and keep the motor running
• Commonly linked to motors that hum, fail to start, or run intermittently
• Helps prevent overheating from repeated start attempts when functioning properly
• Works with the appliance's start circuitry to ensure consistent performance

• Disconnect power to the appliance before accessing electrical components
• Discharge the capacitor and use insulated tools
• Observe polarity/terminal layout and secure connections to factory specifications
• Dispose of the old capacitor according to local electronic-waste regulations

A Tap-Tite binding-head screw used to fasten appliance panels and components where a self-tapping metal thread is required. Replaces missing or damaged fasteners to restore secure assembly and reduce vibration or rattling. What it does:

• Creates its own mating thread in thin sheet metal for a secure hold without a nut.
• Holds panels, brackets, and trim in place to prevent looseness or movement.
• Commonly used where stripped, missing, or broken screws cause rattling, misalignment, or parts that won't stay attached.
• Compatible with standard screwdrivers or nut drivers sized to the binding-head.

• Disconnect power and unplug the appliance before working on it.
• Use the correct driver bit to avoid cam-out or head damage.
• Start straight and apply steady pressure; avoid overtightening to prevent stripping the formed threads.
• If the original hole is badly damaged, assess for repair or use of a larger fastener as needed.