Lmv2931bd Parts

This bottom plate is the interior panel that covers and protects the oven or microwave floor, giving a clean cooking surface and shielding internal components from spills and debris. It helps maintain safe, reliable operation. What it does:

• Covers the appliance interior floor to catch drips and crumbs and keep them away from heating and mechanical parts
• Protects underlying components from corrosion and food damage
• Helps maintain even heat distribution by providing a stable cooking surface
• Worn, bent or missing plates can cause excessive debris buildup, odors, or contact with moving parts

• Disconnect power (unplug or switch off breaker) and allow the appliance to cool before starting
• Handle carefully—edges may be sharp; wear gloves if needed
• Install with existing factory screws or clips; do not force or bend the plate
• If other parts are damaged or missing, replace them per the manufacturer's instructions

Replace a damaged or dented refrigerator door with this complete door assembly to restore proper door operation, appearance, and sealing. The full assembly makes replacing a bent or broken door faster and keeps internal components correctly aligned. What it does:

• Replaces the entire refrigerator door so the unit can close and seal correctly
• Restores mounting points for handles, bins, and trim to secure storage and use
• Helps stop cold-air leaks and reduces frost or cooling issues caused by damaged doors
• Improves exterior appearance when the original door is dented, cracked, or warped

• One complete door assembly

• Disconnect power to the appliance before beginning any repair
• Door assemblies are heavy and may require two people to lift and align safely
• Keep all original fasteners and verify hinge orientation during reassembly
• If the assembly includes wiring for lights or sensors, reconnect and test electrical connections before restoring power fully

The Interlock Door Switch is an OEM part for LG microwaves. It is a safety component located on the door of the microwave designed to prevent the microwave from operating unless the door is securely closed. The interlock door switch works with the microwave's electronic control board to sense when the door is open or closed and allow or disallow operation accordingly.

Causes of a bad interlock door switch can include normal wear and tear from repeated opening and closing of the microwave door over time.

Symptoms of a bad interlock door switch include:

• The microwave runs or heats with the door open
• Error codes or diagnostic messages related to door sensors on the control board
• The microwave fails to operate even when the door is securely closed

This OEM LG part is also compatible with some Sears/Kenmore microwaves.

This replacement door handle restores a secure, comfortable grip on your microwave door. Install it to fix loose, cracked, or broken handles so the door opens and closes smoothly and looks refreshed.

• Provides a sturdy pull point to open and close the door
• Replaces damaged or worn handles to maintain safe operation
• Helps resolve symptoms like a loose/wobbly handle, cracks, or difficulty opening the door
• Aligns with factory mounting points for proper fit and alignment

• Disconnect power to the microwave before servicing
• Access the handle screws from inside the door; carefully remove the inner trim to reach them
• Support the door and glass while working; avoid overtightening the screws
• After reassembly, verify the door latches and opens/closes smoothly

This turntable shaft (MH-8) connects the microwave's turntable motor to the glass tray hub so the tray spins for even heating. Replace it when the tray won't rotate, slips intermittently, or makes grinding/clicking noises.

• Couples the turntable motor to the tray hub to drive rotation
• Helps ensure even cooking and defrosting by keeping the tray moving
• Typical symptoms: tray not turning, intermittent/jerky rotation, grinding or clicking from the cavity floor
• Damage indicators: cracks, melted/rounded drive surfaces, or excessive wobble

• Disconnect power to the microwave at the plug or breaker before servicing
• Remove the glass tray and roller ring to access the shaft
• Lift the old shaft straight up; if stuck, access the turntable motor from below to push it out
• Align and press the new shaft fully onto the motor spindle; reassemble and test rotation

This is the turntable assembly for the microwave's rotating tray system. It provides a stable, smooth-rotating surface so dishes stay level and heat evenly, replacing a damaged, wobbly, or missing turntable to restore consistent cooking performance. What it does:

• Forms the rotating surface that supports dishes for uniform heating
• Keeps the tray centered and aligned with the drive hub/guide for smooth motion
• Replace if the tray is cracked, chipped, or missing
• Replace if the tray rocks, binds, or skips while turning
• Helps address uneven heating caused by poor or inconsistent rotation

• 1 turntable assembly

• Unplug the microwave or switch off power at the breaker before servicing
• Remove the existing turntable parts and clean the track/hub area
• Set the new assembly so it sits flat and engages the drive hub; verify smooth, unobstructed rotation
• Do not operate the microwave without the turntable properly installed

Replacement door handle that restores a secure, comfortable grip and original appearance to your refrigerator door. Matches the factory fit and finish for a straightforward swap without replacing the full door. What it does:

• Provides a sturdy, ergonomic grip for opening and closing the refrigerator door
• Replaces cracked, loose, broken, or cosmetically damaged handles
• Restores the original look and helps maintain normal door operation
• Intended to use with the refrigerator's factory mounting locations and fasteners

• Use basic hand tools; remove any trim or access panels to reach the handle fasteners
• Support the door while removing/installing the handle to avoid damage or misalignment
• Retain and reuse original screws/fasteners unless new hardware is explicitly supplied
• Refer to your model's service manual for step-by-step instructions and follow all safety precautions

This thermostat is a temperature-sensitive safety switch used in LG microwaves. It monitors internal temperature and opens the circuit when overheating is detected to help protect components from heat damage.

• Monitors temperature at its mounting location inside the microwave
• Opens on overtemperature to interrupt power for safety
• Depending on model/location, a failed or open thermostat can cause no heat, the unit shutting off mid-cycle, or no power until it cools
• Helps prevent damage to the magnetron, cavity, and wiring due to overheating

• Unplug the microwave before service; the high-voltage capacitor can retain a dangerous charge
• Note wire positions, remove mounting screws, and install the new thermostat flat against the surface for proper heat sensing
• Reassemble and test; ensure vents and filters are clear to maintain proper airflow and prevent future overheating

This is a motor start/run capacitor that helps the appliance's motor start and run smoothly by supplying a brief boost of electrical energy. Replacing a failing capacitor restores reliable motor startup and operation. What it does:

• Provides the brief electrical surge needed to start and keep the motor running
• Commonly linked to motors that hum, fail to start, or run intermittently
• Helps prevent overheating from repeated start attempts when functioning properly
• Works with the appliance's start circuitry to ensure consistent performance

• Disconnect power to the appliance before accessing electrical components
• Discharge the capacitor and use insulated tools
• Observe polarity/terminal layout and secure connections to factory specifications
• Dispose of the old capacitor according to local electronic-waste regulations