Lmws27626s /06 Parts

The Link is an OEM part for LG refrigerators. It serves as an integral connector between the refrigerator door and cabinet, facilitating smooth opening and closing of the door. With durable construction and precise engineering, the link is designed to withstand the rigorous motion of hundreds of door openings without compromising functionality. 

Symptoms of a bad link include:

• Doors that do not close or seal properly 
• Excessive noise or vibration from the door area
• Damage, bending, or breakage of the connecting pieces
• Misalignment impairing proper door operation

Causes can stem from normal wear and tear over many years of use. Replacing a faulty link restores the refrigerator door's designed motion for convenient access to the interior.

This OEM LG part fits seamlessly while extending the product's useful life. This part is also compatible with Kenmore models featuring LG's refrigerator link assembly design.

This mechanical mounting band secures a bracket assembly inside the appliance to keep components aligned and reduce vibration. It restores proper bracket positioning so moving parts run quietly and reliably. What it does:

• Holds a bracket or component assembly in place to maintain proper alignment
• Dampens movement and reduces vibration-related noise or rattling
• Prevents excess wear by keeping parts from shifting during operation
• Helps maintain correct clearances to avoid interference or rubbing

• Disconnect power before inspecting or replacing internal parts
• Remove only the fasteners necessary to access the bracket; keep track of hardware
• Secure all fasteners to the manufacturer's torque or snug specification
• Replace the band if bent, cracked, or missing to restore proper fit and function

This condenser assembly connects and secures the refrigerator condenser components, helping the cooling system run reliably. It replaces damaged or corroded condenser wiring to restore proper condenser function and airflow. What it does:

• Provides the OEM-configured wiring and mounting for the condenser to ensure consistent electrical connection.
• Restores proper condenser operation when original wires are cut, burnt, corroded, or loose.
• Helps prevent intermittent cooling or compressor issues caused by faulty condenser connections.
• Maintains correct routing and strain relief for condenser lines to reduce wear and chafing.

• One condenser assembly with attached wiring and mounting hardware as shown.

• Recommended for technicians or confident DIYers; disconnect power before starting and unplug the appliance.
• Inspect surrounding components for damage; replace any compromised parts.
• Use proper tools and tighten mounting hardware to OEM torque where specified; avoid pinching wires.

This restrainer is a small retaining clip that helps secure moving or removable components in place, reducing rattles and keeping parts aligned for reliable operation. It's a simple replacement for worn or broken clips. What it does:

• Holds a cover, panel, or door-related component in proper position to prevent shifting
• Reduces noise caused by loose or vibrating parts
• Restores original fit where a broken or missing clip allows movement
• Simple mechanical function — no electrical connections or calibration

• One restrainer

• Disconnect power (and water if applicable) before beginning repairs
• Inspect surrounding mounting points for damage; replace any broken tabs or fasteners
• Typically installs with basic hand tools; align clip and press or snap into place until secure

Restore a tight, reliable seal on your refrigerator door with this replacement gasket. A fresh gasket stops cold-air leaks that lead to frost, condensation, and temperature swings—helping your fridge run smoothly and keep food at the right temperature. What it does:

• Seals the gap between the door and cabinet to keep cold air in and warm air out
• Helps maintain consistent interior temperature and humidity
• Reduces frost and condensation around the door opening
• Common symptoms: torn or warped gasket, door not closing flush, moisture at the seal, frost buildup, or the unit running more than usual

• 1 door gasket

• Disconnect power before starting and clear items from the door
• Lay the new gasket flat and gently warm it (hot water or low-heat hair dryer) to relax folds
• Starting at the corners, press the gasket lip fully into the door channel and work evenly around
• Perform a paper-slip test around the perimeter and adjust door alignment if needed; avoid overheating the gasket

The Evaporator Fan Blade is an OEM replacement part for LG refrigerators. It is a key component located inside the refrigerator that works to circulate cold air evenly throughout. The fan blade spins rapidly to distribute chilled air from the evaporator coil and refrigeration system, ensuring proper airflow and consistent temperatures across all shelves and compartments.  

Symptoms of a bad evaporator fan blade include:

• Inconsistent or improper interior cooling temperatures 
• Hot or warm spots developing inside the refrigerator
• Strange noises such as clicking or grinding emanating from the rear wall

Causes of a bad evaporator fan blade can be wear and tear over time, an accumulation of dust or debris on the blades restricting airflow, or accidental damage like dents or cracks to the blades affecting their ability to spin smoothly.

This OEM LG part is also compatible with select Sears/Kenmore brand models.

The refrigerator door gasket seals the gap between the door and cabinet to keep cold air in and humid air out, helping maintain temperature, reduce frost and condensation, and restore a tight, reliable door close.

• Creates an airtight perimeter seal to prevent warm air leaks
• Helps stabilize interior temperature and humidity
• Minimizes frost buildup and condensation around the door
• Common symptoms: torn or deformed seal, door not sealing, moisture/frost near door, rising temps

What's included: 1 door gasket Installation notes:

• Disconnect power before servicing
• Allow the new gasket to warm to room temperature; soften in warm water or with gentle, low heat to relax folds
• Remove the old gasket and thoroughly clean the mounting channel/mating surfaces
• Seat the new gasket starting at the corners, then along the sides; ensure it's fully engaged and even all around, and check door alignment/seal

This fan assembly circulates air within the appliance to maintain steady temperatures and efficient cooling. Replacing a worn or noisy unit restores proper airflow, reduces hot or cold spots, and helps protect other components. What it does:

• Moves air through the appliance and across cooling components for even temperature distribution
• Helps remove heat and moisture as designed for efficient operation
• Replaces a seized, slow, intermittent, or noisy fan/motor assembly
• Common symptoms include weak or no airflow, temperature fluctuations, or abnormal humming/rattling sounds from the fan area

• 1 fan assembly

• Disconnect power before servicing; allow any iced or brittle plastic areas to warm/defrost
• Remove access panels/ducts as needed; note wire routing and take photos for reference
• Transfer any reusable brackets, grommets, or screws from the original assembly
• Ensure the blade spins freely and wiring is clear of the fan path before reassembly and testing

Replacement door gasket that seals the refrigerator door to help keep cold air in and warm air out, reducing frost and cold-air leaks and helping the appliance maintain consistent internal temperatures for food preservation. What it does:

• Creates an airtight seal around the refrigerator door to minimize cold-air loss
• Helps prevent frost buildup in the fresh-food compartment and freezer-adjacent areas
• Addresses symptoms like visible cracks, tears, gaps, or cold air escaping from the door edges
• Helps the fridge maintain set temperatures and can reduce the workload on the cooling system

• Disconnect power to the appliance before starting any repair
• Remove the old gasket fully and clean the door channel to ensure a proper new seal
• Press the new gasket into the channel evenly, working around the perimeter and checking for full contact
• After installation, close the door and inspect the seal; allow a short settling period and re-check for gaps

This water filter assembly replaces the refrigerator's water filtration module to help restore clear-tasting water and steady flow. Fits models that use the AGF80300705 assembly and installs at the refrigerator water inlet. What it does:

• Filters sediment and common taste/odor contaminants to improve drinking water quality
• Restores reduced water flow caused by a clogged or failing filter module
• Helps reduce visible particulates and cloudiness in dispensed water
• Prevents unfiltered water from reaching the dispenser/ice maker when installed

• Turn off refrigerator water supply before replacing the assembly to avoid leaks
• Hand-tighten connections; avoid overtightening fittings to prevent damage
• Run and discard the manufacturer-recommended initial volume of water after install to flush the system

This is the refrigerator's vegetable tray assembly—the clear crisper drawer that holds produce in the fresh food compartment. Replace a cracked or missing bin to restore organized storage and smooth, reliable drawer operation. What it does

• Provides dedicated storage for fruits and vegetables in the refrigerator
• Slides on the existing drawer rails for easy access
• Helps contain spills and keep items organized
• Replace if the bin is cracked, warped, won't stay on its track, sticks, or is missing

• 1 vegetable tray assembly

• Empty the drawer and remove any shelf above if needed for clearance
• Pull the old drawer out to the stop, lift the front slightly, and remove
• Align the new tray on the rails and slide it fully into place
• Handle plastic carefully; edges can be sharp—use gloves and avoid forcing the drawer

This freezer door foam assembly replaces the insulating foam inside a freezer door to help restore the door's sealed fit and reduce air leakage. It helps improve temperature stability and reduces frost buildup when the existing foam is damaged. What it does:

• Replaces deteriorated or compressed insulation inside the freezer door
• Restores a tighter door seal to reduce warm air infiltration
• Helps reduce excessive frost or ice buildup caused by air leaks
• Supports consistent freezer temperatures and efficient operation

• Disconnect power before starting and work with the door supported or removed to avoid injury.
• Remove the inner door panel or liner carefully to access the foam; keep fasteners and clips organized.
• Fit the foam into the door cavity without overstretching; ensure even contact with mating surfaces for a proper seal.
• If adhesive, clips, or a door liner are required, replace or reinstall them as needed.

This Rail Guide Assembly restores smooth opening and stable support for a refrigerator/freezer drawer or similar appliance drawer. It replaces a worn or damaged guide to reduce sticking, misalignment, or noisy operation. What it does:

• Guides and supports the drawer along its track so it opens and closes evenly
• Replaces cracked, bent, or worn guide components that cause sticking or derailment
• Reduces scraping or grinding noises from a misaligned drawer
• Helps maintain proper drawer alignment and weight distribution during use

• Rail Guide Assembly (single)

• Disconnect power and remove stored items before starting any repair
• Use basic hand tools; lift and align the drawer onto the new guide during reassembly
• Inspect mating tracks and rollers for damage; replace other worn components as needed

This rail guide assembly helps the appliance drawer or rack slide smoothly and stay aligned, restoring reliable movement and reducing scraping or sticking during use. What it does

• Guides the drawer/rack along its track for smooth in-and-out motion
• Keeps the drawer aligned to prevent binding or tipping
• Reduces noise from grinding or scraping when the drawer is moved
• Helps prevent uneven wear on the track and adjacent components

• One rail guide assembly

• Disconnect power and remove any contents from the drawer/rack before starting
• Installation typically requires removing the drawer and securing the guide with basic hand tools
• Inspect the mating track and fasteners; replace damaged hardware as needed

This TV cover assembly replaces the rear cabinet that protects the TV's internal components and restores the unit's exterior appearance. It provides a secure housing to keep circuitry and boards enclosed while improving fit and finish. What it does

• Replaces a cracked, warped or missing rear cabinet that leaves internal parts exposed
• Restores mounting points for internal components and connection access
• Reduces rattles and vibration caused by damaged or loose rear housing
• Helps maintain proper airflow path designed for the TV's internal layout

• One TV cover assembly (rear cabinet) as shown

• Disconnect power and any cables before starting; work on a flat, static-free surface
• Installation typically requires removing the stand and unscrewing rear fasteners; keep track of screws and brackets
• Handle with care to avoid scratching the finish or damaging clips; alignment may require gentle pressure to seat tabs