Lmxs28626d Version Parts

This holder bracket replaces a damaged or missing mounting support. It secures an internal component so it stays aligned and stable, helping your appliance operate smoothly without looseness or rattling.

• Provides a rigid mounting point to hold a component or assembly in place
• Maintains alignment to reduce vibration, rubbing, and intermittent operation
• Restores support when the original bracket is cracked, warped, or missing
• Common symptoms include a loose/wobbly part, rattling noises, or visible broken tabs

• Disconnect power to the appliance before servicing
• Note the original bracket's orientation and transfer any clips or screws from the old part
• Use existing hardware and tighten fasteners evenly—do not overtighten
• Verify proper fit and alignment before restoring power

This sheath-style heater melts frost from the evaporator during automatic defrost cycles to keep airflow clear and temperatures stable. Replacing a failed heater helps stop recurring ice buildup and restore consistent cooling performance.

• Heats the evaporator to melt accumulated frost/ice during defrost
• Keeps air passages clear to maintain proper temperatures
• Helps prevent frost-packed evaporator covers and reduced cooling
• Common symptoms: heavy frost behind the freezer panel, fan noise from ice contact, weak cooling, long run times

• Disconnect power before servicing; allow any sharp edges to be avoided with cut-resistant gloves
• Access is typically behind the freezer's rear interior panel; remove shelves/drawers and panel to reach the evaporator
• Transfer any clips/sensors attached to the heater in the same positions; avoid bending fins or puncturing refrigerant lines
• Ensure connectors are fully seated and the heater is secured before restoring power and monitoring operation

This hinge cam fits the door hinge and provides the lift/settle action that helps the door open and close smoothly. Replacing a worn cam can reduce clicking and restore consistent door movement and alignment.

• Provides cam action at the hinge for smooth door travel
• Helps the door seat closed and maintain alignment
• Common symptoms include clicking/knocking at the hinge, rough or uneven door movement, or slight door sag
• Visual wear such as flat spots or grooves on the cam is a typical failure sign

• Disconnect power to the appliance before servicing
• Support the door to prevent injury; remove hinge cover and hardware as needed
• Note the cam's orientation and any washers/spacers and transfer them to the new part
• After installation, verify door operation and gasket alignment; adjust hinge if needed

This refrigerator water filter assembly conditions the water supplied to the dispenser and ice maker, helping deliver cleaner, better-tasting water and ice while maintaining proper flow. Replace regularly to keep your fridge's water system performing as designed. What it does:

• Filters incoming water for the dispenser and ice maker
• Helps improve taste and clarity of water and ice
• Supports proper dispenser flow and consistent ice production
• Replace when the filter indicator turns on or water/ice quality declines

• Dispense water to relieve line pressure; place a towel to catch any drips
• Remove the old filter and seat/lock the new cartridge fully—do not overtighten
• Flush water until it runs clear, and reset the filter indicator

The Magnet Switch is an OEM part for LG refrigerators. It plays an important role in monitoring the position of the refrigerator door. 

The magnet switch works together with a magnet installed in the door gasket to detect when the door is opened or closed. It communicates this information to the control board which uses it to manage temperatures and fan speeds accordingly. 

Causes of a bad magnet switch can include wear and tear over time, physical damage, or failure of internal components. 

Symptoms of a bad magnet switch include:

• Improper cooling and freezing performances 
• Inability to detect when the door is opened
• Erratic temperature fluctuations
• Errors codes relating to door sensors

This genuine OEM LG magnet switch restores the door monitoring functions of your refrigerator. It is also compatible with Sears/Kenmore refrigerator models.

This door gasket seals the dishwasher door perimeter to keep water and steam inside the tub. Replacing a worn or flattened seal helps stop leaks and restores a consistent, reliable door closure. What it does:

• Forms a watertight seal between the door and tub during wash cycles
• Helps prevent leaks from the sides or bottom of the door
• Replace if the gasket is cracked, torn, deformed, or no longer springy
• Can help with symptoms like water on the floor at the front of the unit or difficulty latching the door

• Includes 1 door gasket

• Disconnect power and shut off the water supply before servicing
• Open the door, pull the old gasket straight out of the channel, and clean the groove
• Let the new gasket warm to relax kinks; start at the top center and press evenly into the channel down both sides—fully seat the corners and avoid stretching
• Close the door to help the seal set, then run a short cycle and check for leaks

This holder is a small mounting bracket that secures a mating component in place inside the appliance. Replacing a cracked or missing holder restores a firm, rattle-free fit and proper alignment.

• Provides a stable mount for the designated part
• Prevents shifting and vibration that can cause noise or premature wear
• Common signs of failure: broken tabs, stress cracks, or the attached part sagging or falling out
• When damaged, the connected component may be loose, noisy, or misaligned

• Disconnect power; if working near water tubing, also shut off the water supply
• Note the original orientation and mounting points; take a photo before removal
• Reuse existing fasteners and avoid overtightening to prevent cracking the plastic
• Ensure the attached component is secure and clears any moving parts before restoring power

This cabinet roller supports the refrigerator and lets the unit roll in and out of place for cleaning or service. Replace a worn or broken roller to restore smooth movement and help keep the appliance properly positioned.

• Supports the base of the refrigerator and enables rolling movement
• Helps with safe positioning and service access without dragging
• Common failure signs: appliance is hard to move, scraping or rolling noises, a flat-spotted/cracked wheel, or a wheel that won't turn
• Replace when the roller is damaged, seized, or missing

• Disconnect power and shut off water supply; protect flooring before moving the appliance
• With help, pull the refrigerator forward and safely support it to access the roller
• Remove mounting fasteners, install the new roller, and reuse original hardware
• Confirm level and smooth movement before returning the unit to its location

This fan grille assembly covers and protects the appliance fan while helping direct airflow and minimize noise. It's a direct-fit replacement component that restores proper ventilation and keeps debris away from the fan blades. What it does:

• Shields fan blades from objects and debris that can cause damage or binding
• Directs airflow for more consistent ventilation and cooling performance
• Helps reduce rattle or vibration caused by cracked or loose grille pieces
• Restores proper fan clearance when the original grille is warped or broken

• Disconnect power to the appliance before starting any work.
• Handle the grille carefully to avoid damaging mounting tabs; small plastic clips are common.
• Installation typically requires basic hand tools (screwdriver); align tabs and secure fasteners snugly.

This is the door handle mounting bracket assembly that secures the handle firmly to the door. It replaces a damaged or stripped bracket to restore a solid, wobble-free grip and reliable handle attachment.

• Mounts and secures the door handle to the door/frame
• Maintains alignment to prevent handle wobble or looseness
• Replaces cracked, broken, or stripped brackets to restore proper attachment
• Typical symptoms: loose or wobbly handle, handle pulls off, visible damage at the handle mount, rattling at the handle area

• Disconnect power before servicing and work carefully to avoid damaging the door surface
• Support the handle while loosening and tightening set screws or fasteners
• Retain and reuse original mounting hardware if it's in good condition
• Align the new bracket in the original location; do not overtighten fasteners

The PCB Assembly, Display is an OEM part for LG refrigerators. It is responsible for controlling the refrigerator's display functions and interface. The PCB assembly monitors temperature settings and regulates the input and output of operational data and controls. It assists the user by displaying temperatures, cycle settings, option selections, and error codes via the control panel.

Issues such as random glitches, unresponsive buttons, or a blank display could indicate problems with the PCB assembly. Other causes include water damage, impact damage, or short-circuiting due to manufacturing defects. 

Symptoms of a bad PCB assembly include: 

• Control panel not functioning properly  
• Faulty display or unreadable screen
• Refrigerator functions not responding to input controls
• Error codes appearing repeatedly

This OEM LG part provides a direct fit and like-for-like replacement for ensuring proper display functionality. It is also compatible with Sears/Kenmore models that utilize LG components.

This replacement funnel channels flow cleanly through the dispenser/fill area, guiding it into the correct passage to help prevent spills, drips, and messes when the original piece is cracked, warped, or missing.

• Guides flow into the correct passage within the dispenser or fill area
• Helps reduce drips, leaks, and misdirected flow caused by damage or wear
• Restores clean, accurate dispensing and a tidy appearance
• Common symptoms include leaking/dripping at the dispenser, misdirected stream, visible cracks, or a loose/missing funnel

• Disconnect power; shut off water supply if applicable
• Remove surrounding trim or fasteners carefully and retain hardware for reuse
• Clean the mounting area before installing the new funnel
• Ensure tabs/locks fully seat; secure fit before restoring power and water

The Heater Sheath is an OEM part for LG French door refrigerators equipped with a pantry drawer or convertible compartment feature. This metal sheath encloses the refrigerator's temperature control heater, protecting wiring from moisture and extending the component lifespan.

Causes of a deteriorated heater sheath may relate to normal corrosion or cracks from temperature variations over many years of use. Moisture exposure can lead to rust or compromised insulation.

Symptoms of a problematic sheath include: 

• Inconsistent or fluctuating drawer/compartment temperatures  
• Unusual odors emanating near electrical components
• Potential short-circuiting or heating system malfunctions

This OEM sheath also fits select Kenmore/Sears refrigerators.

This fan grille assembly covers and protects the evaporator fan while directing airflow through the refrigerator compartment. Replace a cracked, warped, or missing grille to restore proper circulation, reduce vibration/noise, and prevent items from contacting the fan. What it does:

• Covers the evaporator fan and channels chilled air through the compartment
• Helps maintain even cooling and consistent airflow
• Common symptoms: broken or missing louvers, loose/broken tabs, rattling or vibration, uneven cooling or weak airflow

• One fan grille assembly

• Disconnect power to the refrigerator before servicing
• Remove shelves/drawers as needed for access
• Remove mounting screws or release tabs; carefully disengage the old grille
• Align the new grille, secure hardware without overtightening, ensure vents are unobstructed, then restore power

This replacement water tank assembly restores the refrigerator's internal water reservoir. It stores and chills water for the dispenser, helping maintain steady flow and addressing leaks caused by a cracked or brittle tank. What it does:

• Holds and chills dispenser water inside the fresh food compartment for consistent flow.
• Replaces a cracked or leaking reservoir that can leave puddles inside the refrigerator.
• Helps address low/no water or sputtering at the dispenser caused by an air-leaking or deformed tank.

• 1 water tank assembly

• Unplug the refrigerator and turn off the water supply before servicing.
• Remove shelves/panels as needed; note tube routing and avoid kinking lines during transfer.
• Fully seat water-line fittings and perform a gentle pull test; restore water and check all joints for leaks.
• Dispense several glasses of water to purge air until flow is steady; recheck for leaks after the first hour of operation.