Lmxs30776s Parts

This refrigerator door gasket seals the door to the cabinet to keep cold air in and humid air out. Replacing a worn or torn seal restores proper temperatures, reduces frost and condensation, and helps the unit run efficiently.

• Creates an airtight seal between the door and cabinet perimeter
• Helps maintain internal temperature stability and energy efficiency
• Reduces frost/ice buildup and moisture around the door opening
• Common symptoms: visible tears or warping, gaps, door not sealing, warm spots, frost or condensation near the door

• Unplug the appliance before servicing
• Let the new gasket relax flat at room temperature, or gently warm it to make it more pliable
• Clean the sealing surfaces; seat corners first, then work evenly along the sides
• Close the door and check for uniform contact all around; adjust as needed for a consistent seal

The Shelf Assembly is an OEM replacement part for LG refrigerators. It provides a movable shelf surface for organizing and storing items in the refrigerator or freezer compartment. 

Symptoms of a bad shelf assembly include:

• Sagging or bowing of the shelf surface 
• Difficulty in moving or removing the shelf
• Damage or cracks in the frame or wire grid
•  Inability to bear weight as intended

Causes of failure can be repeated overloading, accidental impacts, or normal wear and tear over time. 

This authentic LG shelf assembly is also compatible with refrigerators by Kenmore models.

This guide assembly lines and supports the TV's internal guide or track, helping keep the display aligned and stable for smooth operation and reduced noise. It replaces a worn, broken, or misaligned guide to restore proper panel movement. What it does:

• Provides a stable channel for the TV panel or internal components to slide or rest
• Restores proper alignment to reduce rubbing, scraping, or uneven movement
• Helps eliminate rattles or vibration caused by a loose or damaged guide
• Supports consistent operation of any sliding or guided TV mechanisms

• Disconnect power and remove the TV from its stand or wall mount before starting
• Handle the display and internal components carefully to avoid damage and ESD-sensitive parts
• Follow the manufacturer's service manual for disassembly and reassembly steps and proper fastener torque

A replacement guide rail assembly that supports and guides the appliance drawer or shelf for smooth, stable sliding and proper alignment. Restores reliable movement and helps prevent sticking or binding. What it does:

• Guides the drawer or shelf along its track for consistent, even movement.
• Keeps the sliding component aligned to prevent tilting, binding, or uneven wear.
• Provides structural support for the drawer under normal load.
• Helps restore smooth operation when worn, bent, or damaged rails cause sticking or misalignment.

• Disconnect power and remove stored items before beginning any repair.
• Use basic hand tools; avoid forcing components and do not overtighten mounting hardware.

This door foam assembly replaces worn or damaged inner door insulation to help restore thermal performance and reduce vibration noise. It fits behind the door panel to improve temperature retention and support the door structure. What it does:

• Provides insulation inside the door cavity to help maintain interior temperature
• Dampens vibration and reduces rattling or noise from the door
• Fills gaps to help prevent moisture migration and condensation buildup
• Restores door shape and support when old foam has deteriorated

• Disconnect power and remove food or contents from the appliance before beginning.
• Access may require removing the outer and inner door panels; follow the OEM service manual.
• Handle the foam carefully to avoid tearing; use appropriate adhesive or fasteners if required by the model.

The HARNESS ASSEMBLY is an OEM part for LG refrigerators. It is a collection of wires bundled together into a single integrated unit, electrically connecting major fridge components like lights, temperature controls, and more. A properly functioning harness is vital for signal transmission throughout the appliance.

Causes of a bad harness assembly can include wear-and-tear damage from repeated door openings, exposed wires snagging on other parts, or potential water damage degrading insulation qualities over time. 

Symptoms of a bad harness assembly include:

• Lights, temperature controls, or other features failing to work properly  
• Intermittent or unreliable operation of connected components
• Loose or disconnected wires that may cause electrical issues
• Error codes related to sensor or control board failures

This part is also compatible with Sears/Kenmore models.

This door stopper replaces the small hinge stop that limits door swing and helps the door close and latch properly. It restores correct door alignment and prevents the door from swinging past its intended range. What it does:

• Acts as a mechanical stop on the door hinge to control opening angle and reduce stress on the hinge
• Helps the door close smoothly and remain properly aligned
• Commonly replaces a cracked, worn, or missing stopper that allows over-rotation or uneven closing
• Can reduce noise and wear caused by a loose or shifting door

• Disconnect power to the appliance before servicing to avoid injury
• Replace like-for-like; removal may require removing the hinge trim or screws—keep fasteners organized
• Inspect adjacent hinge components and seals for wear while the door is removed

This drip tray catches and channels water runoff inside the appliance to help prevent pooling and minor leaks. It's a direct-fit replacement listed by the manufacturer and sold as the single tray used in the unit. What it does

• Collects condensate or defrost water and directs it to the drain area to prevent pooling.
• Helps stop water from dripping onto lower drawers, shelves or the floor.
• Commonly replaces a cracked, warped or missing tray that causes visible leaks or water buildup.
• Fits into the appliance's lower compartment where the original tray sat.

• Unplug the appliance or disconnect power before servicing.
• Remove any obstructing drawers or shelves to access the tray location; handle glass shelves carefully.
• Lift out the old tray and set the new tray into the same position; no special tools typically required.

This guide assembly positions and secures the TV's front-panel or bezel components to keep controls and trim aligned for a clean fit and reliable button access. Replaces a worn, cracked, or misaligned guide to restore proper panel seating. What it does

• Aligns and supports the TV front panel/bezel so edges meet evenly
• Holds control board/buttons or trim in the correct location
• Prevents rubbing, rattling, or gaps between bezel and chassis
• Helps maintain consistent button feel and keypad alignment

• One guide assembly

• Unplug the TV and place on a soft, stable surface before beginning
• Remove bezel or trim per service manual to access guide locations
• Keep small screws and clips organized; compare old part orientation to new

This drawer tray assembly replaces a damaged or worn refrigerator storage drawer to restore stable storage and smooth operation. It supports food storage and helps the drawer open and close as designed. What it does:

• Replaces cracked, warped, or broken drawer tray that no longer supports items
• Restores proper seating and alignment so the drawer slides smoothly
• Prevents items from falling through or catching on damaged edges
• Helps maintain internal organization and usable refrigerator space

• Disconnect power to the appliance before servicing to avoid injury
• Handle the tray carefully to avoid damage to plastic edges or clips
• Remove any contents and existing drawer components before installing
• If the drawer uses mounting clips or rails, inspect and replace damaged hardware as needed for proper fit

A small protective cap that covers and protects a component connection or opening from dirt and moisture, helping maintain proper function and prolong component life. Simple replacement when the original cap is cracked, missing, or worn. What it does:

• Covers exposed fittings, terminals, or openings to keep out debris and moisture
• Helps prevent leaks or contamination at the sealed connection
• Restores a secure fit when the original cap is cracked, split, or degraded
• Commonly used where a small, removable protective seal is required

• Inspect mating surface and surrounding gasket/seal before installing; replace other damaged parts as needed
• Press the cap firmly into place until fully seated; no special tools usually required
• Wear gloves and disconnect power or water supply if working near energized or pressurized components

This connector tube routes water from the refrigerator's supply to the ice maker or dispenser, restoring normal water flow and ice production when the original tube is cracked or clogged. It's a direct-fit replacement designed for quick restoration. What it does:

• Replaces damaged or cracked water line routing to the ice maker or dispenser
• Restores proper water flow to prevent low ice production or slow dispensing
• Helps stop leaks caused by split or brittle tubing at connector points
• Matches OEM routing and fit to maintain reliable connection and pressure

• Disconnect the refrigerator from power and shut off the water supply before beginning.
• Drain remaining water from lines and wear gloves; connections may drip when removed.
• Inspect fittings and seals; replace O-rings or clamps if they are worn or damaged.
• Tighten connections to a snug, leak-free fit; test by turning water back on and checking for leaks.

This door stopper cushions and limits the appliance door's movement to help prevent slamming, misalignment, and wear. A small replacement part that restores smoother, quieter door operation. What it does:

• Absorbs impact when the door closes to reduce noise and shock
• Keeps the door from over-travel that can cause misalignment or rubbing
• Helps the door latch and seal properly by stabilizing movement
• Stops rattling or binding caused by a worn or broken stopper

• Disconnect power to the appliance before starting any repair
• Access may require opening or removing the door or a trim panel; use basic hand tools
• Remove the old stopper and install the replacement in the same position and orientation